Jump to content

49% fails on verify

Bumpydog

By Bumpydog
in ImgBurn Support

 Share

Recommended Posts

Bumpydog ISF Newbie

Bumpydog

Posted
Posted

Hi all sorry to bother you but cannot get passed this

can you please offer some advice.

Have read lots rather than ask but now stuck.

 

DL

Fiffa 13 onto usb stick checked with agbx360 on my comp all OK green

put liteon iHAS524 into my sons comp (games for me and my comp is old Like me)

Then DL

IMGBURN
Burnermax

(did not do agbx360 on his)

 

Burned both Ricoh and and then Verbatim, both 8.5 +R dl

into unit ran Burnmax then image burn .dvd for IMG

both burned worked and both failed on Verify at 49%

Each time IMG started it showed Burner can only do 4x not 2.4x???

but burned anyway.

 

set IMG Ricoh write to 2.4x and calculate layer by IMG

set IMG  Verbatim, write 2.4x and Calculclate layer to 2133520

 

in xbox shows fifa pict but says disc dirty when trying to load.

 

info of issues below.

 

Thank you for taking the time to read this

 

 

xboxdiskreaderror.png

 

 

 

 

                                    I 19:47:03 ImgBurn Version 2.5.7.0 started!I 19:47:03 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)I 19:47:03 Total Physical Memory: 8,387,772 KB  -  Available: 6,203,492 KBI 19:47:03 Initialising SPTI...I 19:47:03 Searching for SCSI / ATAPI devices...I 19:47:04 -> Drive 1 - Info: ATAPI iHAS524   D 8L25 (D:) (ATA)I 19:47:04 Found 1 DVDąRW/RAM!I 20:03:38 Operation Started!I 20:03:38 Source File: E:\FIFA.13.PAL.XBOX360.EndyNicM\FIFA.13.PAL.XBOX360.EndyNicM.dvdI 20:03:38 Source File Sectors: 4,267,015 (MODE1/2048)I 20:03:38 Source File Size: 8,738,846,720 bytesI 20:03:38 Source File Volume Identifier: DVD_ROMI 20:03:38 Source File Volume Set Identifier: 3a03c000MS UDFBridgeI 20:03:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 20:03:38 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 20:03:38 Source File File System(s): ISO9660, UDF (1.50)I 20:03:38 Destination Device: [0:1:0] ATAPI iHAS524   D 8L25 (D:) (ATA)I 20:03:38 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 20:03:38 Destination Media Supported Write Speeds: 4x, 6x, 8xI 20:03:38 Destination Media Sectors: 4,267,040I 20:03:38 Write Mode: DVDI 20:03:38 Write Type: DAOI 20:03:38 Write Speed: 2.4xI 20:03:38 DVD+R DL Reserve Track: NoI 20:03:38 Link Size: AutoI 20:03:38 Lock Volume: YesI 20:03:38 Test Mode: NoI 20:03:38 OPC: NoI 20:03:38 BURN-Proof: EnabledW 20:03:38 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)W 20:03:38 The drive only supports writing these discs at 4x, 6x, 8x.I 20:03:38 Book Type Setting: DVD-ROMI 20:03:38 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: YesI 20:03:38 User Specified L0 Data Zone Capacity: 2,133,520I 20:03:38 Set L0 Data Zone Capacity Succeeded!I 20:03:39 Filling Buffer... (80 MB)I 20:03:43 Writing LeadIn...I 20:04:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 20:04:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 20:04:22 Writing Layer 0... (LBA: 0 - 2133519)I 20:17:27 Writing Layer 1... (LBA: 2133520 - 4267014)I 20:30:36 Synchronising Cache...I 20:30:43 Closing Track...I 20:30:44 Finalising Disc...I 20:31:25 Exporting Graph Data...I 20:31:26 Graph Data File: C:\Users\Arse II\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_D_8L25_02-FEBRUARY-2013_20-03_MKM-003-00_2.4x.ibgI 20:31:26 Export Successfully Completed!I 20:31:26 Operation Successfully Completed! - Duration: 00:27:47I 20:31:26 Average Write Rate: 5,425 KB/s (3.9x) - Maximum Write Rate: 5,634 KB/s (4.1x)I 20:31:26 Cycling Tray before Verify...W 20:31:32 Waiting for device to become ready...I 20:31:45 Device Ready!I 20:31:45 Operation Started!I 20:31:45 Source Device: [0:1:0] ATAPI iHAS524   D 8L25 (D:) (ATA)I 20:31:45 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)I 20:31:45 Source Media Supported Write Speeds: 4x, 6x, 8xI 20:31:45 Image File: E:\FIFA.13.PAL.XBOX360.EndyNicM\FIFA.13.PAL.XBOX360.EndyNicM.dvdI 20:31:45 Image File Sectors: 4,267,015 (MODE1/2048)I 20:31:45 Image File Size: 8,738,846,720 bytesI 20:31:45 Image File Volume Identifier: DVD_ROMI 20:31:45 Image File Volume Set Identifier: 3a03c000MS UDFBridgeI 20:31:45 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 20:31:45 Image File Implementation Identifier: Microsoft CDIMAGE UDFI 20:31:45 Image File File System(s): ISO9660, UDF (1.50)I 20:31:45 Read Speed (Data/Audio): MAX / MAXI 20:31:46 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 20:31:46 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 20:31:46 Verifying Layer 0... (LBA: 0 - 2133519)W 20:38:02 Failed to Read Sectors 2112480 - 2112511 - Reason: L-EC Uncorrectable ErrorW 20:38:11 Failed to Read Sector 2112480 - Reason: L-EC Uncorrectable ErrorW 20:39:29 Retrying (1)...W 20:39:35 Retry Failed - Reason: L-EC Uncorrectable ErrorW 20:39:39 Retrying (2)...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

 

                          ATAPI iHAS524   D 8L25 (ATA)Current Profile: DVD+R DLDisc Information:Status: CompleteState of Last Session: CompleteErasable: NoSessions: 1Sectors: 4,267,024Size: 8,738,865,152 bytesTime: 948:15:49 (MM:SS:FF)MID: MKM-003-00Supported Write Speeds: 4x, 6x, 8xDVD±R DL Boundary Information:L0 Data Zone Capacity: 2,133,520Changeable: NoTOC Information:Session 1... (LBA: 0)-> Track 01  (Mode 1, LBA: 0 - 4267023)-> LeadOut  (LBA: 4267024)Disc Control Blocks Information:ATAPIPhysical Format Information (ADIP - L0):Disc ID: MKM-003-00Book Type: DVD+R DLPart Version: 1Disc Size: 120mmMaximum Read Rate: Not SpecifiedNumber of Layers: 2Track Path: Opposite Track Path (OTP)Linear Density: 0.293 um/bitTrack Density: 0.74 um/trackFirst Physical Sector of Data Area: 196,608Last Physical Sector of Data Area: 16,580,607Last Physical Sector in Layer 0: 2,283,519Physical Format Information (ADIP - L1):Disc ID: MKM-003-00Book Type: DVD+R DLPart Version: 1Disc Size: 120mmMaximum Read Rate: Not SpecifiedNumber of Layers: 2Track Path: Opposite Track Path (OTP)Linear Density: 0.293 um/bitTrack Density: 0.74 um/trackFirst Physical Sector of Data Area: 196,608Last Physical Sector of Data Area: 16,580,607Last Physical Sector in Layer 0: 2,283,519Physical Format Information (Last Recorded - L0):Disc ID: MKM-003-00Book Type: DVD-ROMPart Version: 1Disc Size: 120mmMaximum Read Rate: Not SpecifiedNumber of Layers: 2Track Path: Opposite Track Path (OTP)Linear Density: 0.293 um/bitTrack Density: 0.74 um/trackFirst Physical Sector of Data Area: 196,608Last Physical Sector of Data Area: 16,580,591Last Physical Sector in Layer 0: 2,330,127Physical Format Information (Last Recorded - L1):Disc ID: MKM-003-00Book Type: DVD-ROMPart Version: 1Disc Size: 120mmMaximum Read Rate: Not SpecifiedNumber of Layers: 2Track Path: Opposite Track Path (OTP)Linear Density: 0.293 um/bitTrack Density: 0.74 um/trackFirst Physical Sector of Data Area: 196,608Last Physical Sector of Data Area: 16,580,591Last Physical Sector in Layer 0: 2,330,127Layer Information:Layer 0 Sectors: 2,133,520 (50%)Layer 1 Sectors: 2,133,504 (50%)Performance (Write Speed):Descriptor 1...-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00-> EL: 4267023 (0x00411C0F)-> RS: 16,620 KB/s (12x) - WS: 5,540 KB/s (4x)Descriptor 2...-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00-> EL: 4267023 (0x00411C0F)-> RS: 16,620 KB/s (12x) - WS: 8,310 KB/s (6x)Descriptor 3...-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00-> EL: 4267023 (0x00411C0F)-> RS: 16,620 KB/s (12x) - WS: 11,080 KB/s (8x)
Link to comment
Share on other sites
Bumpydog ISF Newbie

Bumpydog

Posted
  • Author
Posted

Hi Lighting

Thank you

I gather this means

 

IMGBURN
go to Tools>Drives>Change Advanced Settings>LiteOn

Make sure following option are enabled.
Smartburn = enabled
Force Hyper Tuning = enabled
Online Hyper Tuning = enabled

 

I gahther the speed of 2.4x should be kept for the verbatim even though drive is moaning it doesnt do 2.4x?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept