Jump to content

Find disc MID / backup settings


Ch3vr0n

Recommended Posts

yup, that bd-re-xl log was with a verbatim bd-r inside the drive, a previous one was with a maxell bd-re sl, i do have a sony bd-re dl i can try but since all types of bd are affected, it might not be the drive itself or the media but something on the firmware level.

Link to comment
Share on other sites

looks like ur right. In safemode both drives correctly report the MID as VERBAT-ime-00

 

Yet for some reason they don't in normal boot mode, even with anydvd completely inactive, and that's the only program i have installed that otherwise interacts with the drives, nero and that crap isn't even on my system

bd-r--bh10ls30.log

bd-r--bh16ns40.log

Link to comment
Share on other sites

Well at least you've something to go on now. :)

 

What does your filter driver list look like (Tools menu)?

 

Perhaps try installing some intel chipset device software updates, putting the controller into ahci mode and installing the Intel Rapid Storage Tech drive (assuming it supports your chipset).

 

Something is obviously messing things up somewhere along the line :)

Link to comment
Share on other sites

it's as clean as it can be

 

===============================================
Filter Driver Load Order - ImgBurn v2.5.8.0
===============================================

Upper Device Filter:  [None Found]
 Upper Class Filter:  GEARAspiWDM
             Device:  CD/DVD-ROM Device
 Lower Class Filter:  ElbyCDFL
 Lower Class Filter:  PxHlpa64
 Lower Class Filter:  AnyDVD
Lower Device Filter:  [None Found]

        Filter Name:  GEARAspiWDM
          File Name:  C:\Windows\system32\DRIVERS\GEARAspiWDM.sys
       File Version:  2.02.03.00 [2.2.3.0]
   File Description:  CD DVD Filter
       Product Name:  CD DVD Filter
    Product Version:  2.02.03.00 [2.2.3.0]
       Company Name:  GEAR Software Inc.
          Copyright:  Copyright © GEAR Software Inc. 1997-2012

        Filter Name:  ElbyCDFL
          File Name:  C:\Windows\System32\Drivers\ElbyCDFL.sys
       File Version:  5, 2, 1, 4 [5.2.1.4]
   File Description:  ElbyCDIO Filter Driver
       Product Name:  CloneCD
    Product Version:  5, 2, 1, 3 [5.2.1.3]
       Company Name:  SlySoft, Inc.
          Copyright:  Copyright © 2003 - 2010 SlySoft, Inc.

        Filter Name:  PxHlpa64
          File Name:  C:\Windows\system32\Drivers\PxHlpa64.sys
       File Version:  3.00.96.0 [3.0.96.0]
   File Description:  Px Engine Device Driver for 64-bit Windows
       Product Name:  PxHelp64
    Product Version:  [2.0.0.0]
       Company Name:  Rovi Corporation
          Copyright:  Copyright © Rovi Corporation or its subsidiaries. All rights reserved.

        Filter Name:  AnyDVD
          File Name:  C:\Windows\System32\Drivers\AnyDVD.sys
       File Version:  7.2.3.3
   File Description:  AnyDVD Filter Driver
       Product Name:  AnyDVD
    Product Version:  7.2.3.3
       Company Name:  SlySoft, Inc.
          Copyright:  Copyright 2013 SlySoft, Inc.
 

Link to comment
Share on other sites

Putting the storage controller from idea mode into ahci bluescreens windows. And I'm not going to reinstall windows just for that. If i wanna know bd mid ill pop into safe mode i guess. Because downloading the latest storage drivers from Asus itself said my. System is incorrect lol

Link to comment
Share on other sites

I can implement a workaround for you but ideally I'd like to capture the entire 'disc information' structure for that.

 

Do you have Opti Drive Control or DVDInfoPro at all?

 

If you have ODC, just put a disc in and bring up the 'Disc Info' bit. Right click the pane where the disc info is displayed and save it as an html file. Zip that up and upload it on here for me please.

 

If you only have DVDInfoPro, I'll have to detail how to send the correct custom command. (so please let me know ;) )

Link to comment
Share on other sites

as requested

 

file 1 is from the bh16, file 2 is from the bh10 i can only see 1 minor thing different and that's in the speed descripters

 

file 1 lists 4-6-8-10-12, file 2 lists 2-4-6-8-10

 

but hold of on that for now. Although firmwarehq (through imgb) sais there is no new firmware available (drive was using 1.00-A2 i did find a newer one on the lg.com/nl. Version 1.01-A1 and just flashed it. Maybe that'll fix it. I'll let ya know later today.

discinfo.rar

discinfo2.rar

Edited by Ch3vr0n
Link to comment
Share on other sites

As it worked in safe mode, it was never going to be firmware related :)

 

Something is messing with the I/O on your system, it's just a case of finding out what - or ignoring it.

 

Have you tried it with the I/O Interface set to ElbyCDIO rather than SPTI? I'm just curious as to whether or not that I/O Interface would bypass whatever's causing the issue.

Link to comment
Share on other sites

dude, ur a freakin genius. The second i swapped from SPTI to elbyCDIO. MID is now displayed on both drives :) so probably needed have swapped that drive out but hey it was getting old anyway that bh08

 

 

 

I 16:43:32 ImgBurn Version 2.5.8.0 started!
I 16:43:32 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6002 : Service Pack 2)
I 16:43:32 Total Physical Memory: 8.386.684 KiB  -  Available: 4.040.960 KiB
W 16:43:32 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 16:43:32 Initialising SPTI...
I 16:43:32 Searching for SCSI / ATAPI devices...
I 16:43:33 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.01-A0 (F:) (ATA)
I 16:43:33 -> Drive 2 - Info: HL-DT-ST BD-RE  BH16NS40 1.01-A1 (E:) (ATA)
I 16:43:34 -> Drive 3 - Info: HL-DT-ST DVDRAM GH20NS10 EL01 (G:) (ATA)
I 16:43:34 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (H:) (SCSI)
I 16:43:34 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM, 1 BD-RE and 1 BD-RE XL!
W 16:43:56 I/O Interface has been changed!
I 16:43:56 Shutting down SPTI...
I 16:43:56 Initialising ElbyCDIO...
I 16:43:56 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.1.6.1
I 16:43:56 Searching for SCSI / ATAPI devices...
I 16:43:57 -> Drive 1 - Info: HL-DT-ST BD-RE  BH10LS30 1.01-A0 (F:) (ATA)
I 16:43:57 -> Drive 2 - Info: HL-DT-ST DVDRAM GH20NS10 EL01 (G:) (ATA)
I 16:43:57 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (H:) (SCSI)
I 16:43:57 -> Drive 4 - Info: HL-DT-ST BD-RE  BH16NS40 1.01-A1 (E:) (ATA)
I 16:43:57 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM, 1 BD-RE and 1 BD-RE XL!

 

 

 

HL-DT-ST BD-RE  BH16NS40 1.01 (ATA)
Current Profile: BD-R

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 12.219.392
Free Space: 25.025.314.816 bytes
Free Time: 2715:27:17 (MM:SS:FF)
Next Writable Address: 0
MID: VERBAT-IMe-000
Supported Write Speeds: 4x; 6x; 8x; 10x; 12x

BD Disc Information:
Disc ID: VERBAT-IMe-000
Disc Type: BD-R
Disc Size: 120 mm
Disc Class: 0
Disc Version: 1
Disc Time Stamp: 03/2010
Number of Layers: 1
Layer Type: Writable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.50 nm (25 GB Per Layer)
Push-Pull Polarity: Positive
Recorded Mark Polarity: HTL
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 131.072
Last PAA of Data Zone: 1.658.494

Format Capacities:
DT: 0x01 - NB: 12219392 (0x00BA7400) - TDP: 200704
FT: 0x00 - NB: 11826176 (0x00B47400) - TDP: 12288
FT: 0x32 - NB: 11826176 (0x00B47400) - TDP: 0
FT: 0x32 - NB: 5796864 (0x00587400) - TDP: 0
FT: 0x32 - NB: 12088320 (0x00B87400) - TDP: 0

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 26.976 KB/s (6x) - WS: 17.984 KB/s (4x)
Descriptor 2...
-> B0: 0x08; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 26.976 KB/s (6x) - WS: 26.976 KB/s (6x)
Descriptor 3...
-> B0: 0x08; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 26.976 KB/s (6x) - WS: 35.968 KB/s (8x)
Descriptor 4...
-> B0: 0x08; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 26.976 KB/s (6x) - WS: 44.960 KB/s (10x)
Descriptor 5...
-> B0: 0x08; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 26.976 KB/s (6x) - WS: 53.952 KB/s (12x)
 

 

HL-DT-ST BD-RE  BH10LS30 1.01 (ATA)
Current Profile: BD-R

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 12.219.392
Free Space: 25.025.314.816 bytes
Free Time: 2715:27:17 (MM:SS:FF)
Next Writable Address: 0
MID: VERBAT-IMe-000
Supported Write Speeds: 2x; 4x; 6x; 8x; 10x

Disc Definition Structure:
Certified: No
Scanned: No
Manufacturers Name: HL-DT-ST
Additional ID: BD-RE BH10LS30
Serial Number: K92A1MF4820

BD Disc Information:
Disc ID: VERBAT-IMe-000
Disc Type: BD-R
Disc Size: 120 mm
Disc Class: 0
Disc Version: 1
Disc Time Stamp: 03/2010
Number of Layers: 1
Layer Type: Writable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.50 nm (25 GB Per Layer)
Push-Pull Polarity: Positive
Recorded Mark Polarity: HTL
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 131.072
Last PAA of Data Zone: 1.658.494

Format Capacities:
DT: 0x01 - NB: 12219392 (0x00BA7400) - TDP: 151552
FT: 0x00 - NB: 11826176 (0x00B47400) - TDP: 12288
FT: 0x32 - NB: 11826176 (0x00B47400) - TDP: 12288
FT: 0x32 - NB: 7369728 (0x00707400) - TDP: 151552
FT: 0x32 - NB: 12088320 (0x00B87400) - TDP: 4096

Performance (Write Speed):
Descriptor 1...
-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44.879 KB/s (10x) - WS: 8.991 KB/s (2x)
Descriptor 2...
-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44.879 KB/s (10x) - WS: 17.982 KB/s (4x)
Descriptor 3...
-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44.879 KB/s (10x) - WS: 26.973 KB/s (6x)
Descriptor 4...
-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44.879 KB/s (10x) - WS: 35.964 KB/s (8x)
Descriptor 5...
-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 12219391 (0x00BA73FF)
-> RS: 44.879 KB/s (10x) - WS: 44.955 KB/s (10x)
 

 

 

looks like it's microsoft fucking up. SPTI i believe is program default. Never changed that

Edited by Ch3vr0n
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.