tonyf Posted July 27, 2014 Share Posted July 27, 2014 (edited) I have a DVD in a folder which plays including the menu but when I try to burn it to a DL disc I get a problem where the transition to the other layer is only shown in yellow and there are two entries both identical. Accepting one and continuing results in an error which says layouts do not match.ImgBurn.logevidence.pdf Edited July 27, 2014 by tonyf Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 27, 2014 Share Posted July 27, 2014 It looks like your drive is producing an unreadable disc. Try updating the firmware on the drive. http://www.firmwarehq.com/Samsung/SH-S202N/files.html Try burning the disc at all of the 'Supported' write speeds. 1x isn't one of them so it's using 4x instead. As such, try 6x, 8x and 10x. If the drive still fails to produce a working disc, try cleaning it with a cleaning disc or replace it for one that works properly. Link to comment Share on other sites More sharing options...
Recommended Posts