Jump to content
Sign in to follow this  
godbeer

New to ImgBurn - just a couple of questions.

Recommended Posts

Hi everyone,

 

I downloaded and installed ImgBurn yesterday (until now I've always used DvdDecrypter). I've burned 2 test discs (.msd/.iso images ripped with DvdDecrypter) using the default settings. The discs burned/verified with no problem, a Nero cd-dvd file/surface scan and a DvdInfoPro scan showed no errors, and the discs played perfectly on all my players.

 

So, everything seems great, I just have a couple of questions, mostly about settings. I just want to make sure everything is set correctly before I start burning large amounts of discs. Should I leave the settings at default, or is there anything I should change? Really there are only 2 settings I'm unsure about:

 

1.) In the settings/write tab, the default "write type" is DAO - in Decrypter this setting is SAO - what's the difference, and does it have any impact on writing/playback or anything else?

 

2.) In the settings - I/O tab tab "STPI - use 'cd-rom class" is checked by default. what does this do - should I just leave it checked? I haven't messed with it because I don't know what it is - like I said, until now I've just used the default settings.

 

Aside from those two settings, is there anything I should change (mostly I'm just doing .iso backups ripped with decrypter, or .iso images created with dvdshrink)

 

As for Dual-Layer discs, I've always used decrypter to burn these and never had a problem - I've noticed several postings here where people are having problems burning DL with ImgBurn. Should I stick to Decrypter for DL burning or does ImgBurn work the same way/just as well?

 

Also, is there any way to set ImgBurn as the default burner in DvdShrink?

 

One last thing, just out of curiosity - other than the fact that Decrypter is no longer being updated, are there any advantages in using ImgBurn instead of Decrypter to burn?

 

Thanks for any help/comments, etc.

 

Roy

Share this post


Link to post
Share on other sites

Just as in DVD Decrypter, ImgBurn's default settings are/work best. Leave them as they are.

 

FYI:

 

1. SAO and DAO are the same thing. DAO is the correct term for when talking about DVDs though.

 

2. This is how DVD Decrypter talks to your drives. The common method is to open them using the path '\\.\CdRomX' - where X is some number. That's the 'Cdrom' class. The alternative is via their drive letter using the path '\\.\X:\' where X is the drive letter. That was mainly added for linux users who use the program via Wine.

 

 

Any DL burning issues people are having with ImgBurn are exactly what they'd get from any program. They use crap media with crap firmware. The best they can expect from that combo is crap burns! No software can change that.

 

Yes of course it's better to use ImgBurn. You can see the list of changes from the changelog. Of course every version has new features and improvements over the last one.... pulling it further ahead of what it was in the good old days of DVD Decrypter.

Share this post


Link to post
Share on other sites

Thanks guys - just the reassurance I needed before I started heavy burning - I didn't want to end up burning a whole spindle of discs and then discover that something was set wrong.

 

Jmet: Thanks for the ImgBurn/Shrink guide. I had something similar mapped out in my head - I was going to delete Decrypter, then install ImgBurn in the empty Decrypter folder, change the filename, links, etc. Then re-install decrypter somewhere else on my hard drive. Your way was simpler.

 

Thanks Again,

 

Roy

Share this post


Link to post
Share on other sites

godbeer - You're very welcome! Glad my guide could help.

Share this post


Link to post
Share on other sites

And glad you took my advice and you resolved you dilemma jmet :>}

 

BWAHAHAHAHAHAHAHAHAHAHAAHAHAHA

 

Regards

Share this post


Link to post
Share on other sites
And glad you took my advice and you resolved you dilemma jmet :>}

 

BWAHAHAHAHAHAHAHAHAHAHAAHAHAHA

 

Regards

Oh yes, thank you to blutach! What would I do without ya?? : :w00t:

Share this post


Link to post
Share on other sites
"Also, is there any way to set ImgBurn as the default burner in DvdShrink?

"

I made a guide on how to accomplish this here: http://forum.imgburn.com/index.php?showtopic=131

 

 

I followed this guide and it works great - only thing i have noticed is that Shrink calls up the first ImgBurn.exe file in the folder. In my case 1.0.0.2 or whatever, I save all my versions of the prog in one folder and maybe I need to keep just the latest one in there to stop this happening.

Share this post


Link to post
Share on other sites

It should call the one that you have renamed ImgBurn.exe

 

Regards

Edited by blutach

Share this post


Link to post
Share on other sites

Mmm I thought I renamed the latest one I had but maybe not - will check tonight and update - thanks blu......

 

So knackered at the mo that these mistakes are very common ! :(

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.