Lunki Posted February 12, 2008 Share Posted February 12, 2008 I bought 2 of these since they were only ones I could get fast. But for some reason imgburn only reads them as normal DVD+R and capacity wont go over that. I got LG GSA-H20L and it does support DL dvds and already updated firmware to 1.02. I never had problems with Maxell media, but what could be the problem in here? Link to comment Share on other sites More sharing options...
spinningwheel Posted February 12, 2008 Share Posted February 12, 2008 Junk media for starters. Post a log and let us see what you see.... Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 12, 2008 Share Posted February 12, 2008 log (as spinner said) and info from the panel on the right please. Link to comment Share on other sites More sharing options...
Lunki Posted February 12, 2008 Author Share Posted February 12, 2008 (edited) Info Panel HL-DT-ST DVD-RAM GSA-H20L 1.02 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2 228 225 Free Space: 4 563 404 800 bytes Free Time: 495:11:50 (MM:SS:FF) Supported Write Speeds: 2,4x Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 0 Disc Size: 120mm Maximum Read Rate: 2.52Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 0 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 Log I 14:13:31 ImgBurn Version 2.4.0.0 started! I 14:13:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 14:13:31 Total Physical Memory: 2 096 620 KB - Available: 863 836 KB I 14:13:31 Initialising SPTI... I 14:13:31 Searching for SCSI / ATAPI devices... I 14:13:31 Found 2 DVD-ROMs and 1 DVD±RW/RAM! erm... well that is weird, now it actually reads it as DVD+R DL Will try to burn and see what happens Error at around 45% I 14:13:31 ImgBurn Version 2.4.0.0 started! I 14:13:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 14:13:31 Total Physical Memory: 2 096 620 KB - Available: 863 836 KB I 14:13:31 Initialising SPTI... I 14:13:31 Searching for SCSI / ATAPI devices... I 14:13:31 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 14:24:25 Operation Started! I 14:24:25 Source File: G:\x I 14:24:25 Source File Sectors: 4 155 840 (MODE1/2048) I 14:24:25 Source File Size: 8 511 160 320 bytes I 14:24:25 Source File Volume Identifier: Super Smash Bros. Brawl I 14:24:25 Source File File System(s): None I 14:24:25 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H20L 1.02 (D:) (ATA) I 14:24:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x) I 14:24:25 Destination Media Sectors: 4 173 824 I 14:24:25 Write Mode: DVD I 14:24:25 Write Type: DAO I 14:24:25 Write Speed: 2,4x I 14:24:25 Link Size: Auto I 14:24:25 Test Mode: No I 14:24:25 OPC: Yes I 14:24:25 BURN-Proof: Enabled I 14:24:25 Book Type Setting: DVD-ROM I 14:24:31 Optimal L0 Data Zone Capacity: 2 077 920 I 14:24:31 Optimal L0 Data Zone Method: ECC Block Boundary I 14:24:50 Filling Buffer... (40 MB) I 14:24:51 Writing LeadIn... I 14:24:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 4155839) I 14:24:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4155839) I 14:24:58 Writing Layer 0... (LBA: 0 - 2077919) W 14:45:00 Failed to Write Sectors 1901216 - 1901247 - Unknown (Vendor Unique) (0x80, 0x04) W 14:45:00 Retrying (1 of 20)... W 14:45:00 Retry Failed - No Seek Complete W 14:45:00 Retrying (2 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (3 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (4 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (5 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (6 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (7 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (8 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (9 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (10 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (11 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (12 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (13 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (14 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (15 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (16 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (17 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (18 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (19 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:00 Retrying (20 of 20)... W 14:45:00 Retry Failed - Invalid Address For Write W 14:45:14 Retrying (21)... W 14:45:14 Retry Failed - Invalid Address For Write W 14:45:15 Retrying (22)... W 14:45:15 Retry Failed - Invalid Address For Write W 14:45:15 Retrying (23)... W 14:45:15 Retry Failed - Invalid Address For Write W 14:45:16 Retrying (24)... W 14:45:16 Retry Failed - Invalid Address For Write W 14:45:17 Retrying (25)... W 14:45:17 Retry Failed - Invalid Address For Write W 14:45:21 Retrying (26)... W 14:45:21 Retry Failed - Invalid Address For Write E 14:45:22 Failed to Write Sectors 1901216 - 1901247 - Unknown (Vendor Unique) (0x80, 0x04) E 14:45:22 Next Writable Address: 0 I 14:45:22 Synchronising Cache... W 14:45:51 User opted to skip the 'Close Track/Session/Disc' functions. E 14:45:51 Failed to Write Image! E 14:45:51 Operation Failed! - Duration: 00:21:26 I 14:45:51 Average Write Rate: 3 109 KB/s (2.2x) - Maximum Write Rate: 3 387 KB/s (2.4x) Edited February 12, 2008 by Lunki Link to comment Share on other sites More sharing options...
LOCOENG Posted February 12, 2008 Share Posted February 12, 2008 RITEK-D01-01 Crap media I'm afraid....try some Verbatim MIS 2.4X next for a better chance at success. Link to comment Share on other sites More sharing options...
Recommended Posts