Jump to content

All Activity

This stream auto-updates     

  1. Today
  2. Last week
  3. dbminter

    Unable to burn Bluray discs

    I have seen cases in my own experience where on the CD/DVD laser, reads are fine but writes still failed. Reading data is a much simpler operation than writing it, so reading would have the potential to still work whereas writes may not. I've not observed that in BD personally, though. Now, I'm not familiar with those MBI media, but Ritek and CMCMAG (DEFINITELY CMCMAG.) are known to be cheap and problematic media. So, if the other kind of disc is also cheap, it could be just a case of cheap BD-R media across the board in all 3 cases. Normally when I get Verbatim BD-R, it's the quality VERBAT-IM discs from Amazon.com. However, for others in other countries, it's known to get CMCMAG for BD-R from Verbatim. To put it into perspective, CMC Magnetics causes over 50% of the problems seen on this forum. So, without you trying known good Verbatim VERBAT-IM BD-R media, I can't really tell you if it's a failure in your BD laser or just cheap media. One thing that bears pointing out is your drive is nearing 7 years old. Media manufacturing techniques change many times over the course of a period like that. There's no guarantee to be backwards compatibility with older hardware.
  4. rbalu72

    Unable to burn Bluray discs

    Thank you so much for quick response.. I have updated firmware to 1.03 thats relevant to my drive's model and make year and behavior still same. The MIDs are different, Ritek has something starting RITEK... Verbatim having CMCMAG. It can write CD/DVD/DVD+rw without issues and as you indicated it could be the other laser working all ok so no probs here. This drive currently able to read Bluray Data discs without any issue and I observed the write function is what at the moment abnormal. Does such a case exist like the blue laser can read blurays but cant write?? Its throwing the same error "W 15:21:52 Failed to Write Sectors 0 - 31 - Reason: Write Error". I bought this drive back in 2014 but the usage is quite minimal for writing (must have burned 1-2 10packs during this period), use it predominantly more as a reader of blurays/dvds. BTW, this drive is not with service code NS50 so i am reluctant to update 1.03/1.05 that's available on lg.com (i read over google that it could potentially brick the device as recent firmwares are not meant for this make/model) but gone with an older version of 1.03 available for this model LG drive made in 2013/14 found here Thanks for all your help.
  5. That worked! Thanks very much!
  6. dbminter

    Unable to burn Bluray discs

    It's probably not a media issue as you say you tried 3 different discs from different manufacturers (Ritek, Verbatim, and a "local one.") but get the same results. Unless all 3 have the same Disc ID, which is unlikely, it's probably not a media issue. But, you could try putting in one of each of those 3 types of BD-R into a BD drive, opening ImgBurn in Write mode, and check the pane of information in the right side. Look for different Disc ID's. If they're all the same, then it could be a media issue. However, you'll generally find Verbatim using either CMC or VERBAT-IM in their BD-R Disc ID's. The one in your log is MBI-R06-000, which I'm not familiar with, so it may be the "local one." Definitely try updating the firmware first before going any further. What could be indicative of a problem with your BD drive is you say CD/DVD burn fine but all your BD-R attempts are not. This could actually be very informative. There are actually 2 lasers in a BD burner. One for CD and DVD and the other for BD. The BD laser may have gone bad but your CD/DVD laser is still functioning. How long have you been using this drive? If not very long, then it may have shipped defective from the factory.
  7. LIGHTNING UK!

    Unable to burn Bluray discs

    Your drive reported a 'Write Error' early on during the burn - right at the start actually. I guess it has an issue with the media. If say you've tried multiple different ones (not just different brands, but with different MIDs), maybe your drive is at fault? There are firmware updates available for the drive that may or may not help. v1.03 and a recent v1.05.
  8. Thanks for reading...my drive cant burn bluray discs but can read all type of discs (cd/dvd/bd) and write (cd/dvd/dvdrw) ! ImgBurn unable to burn Bluray discs but the drive could burn CD/DVD/DVD RW without issues... any idea whats going on? I tried 3 different media (ritek, verbatim and a local one) types and the behavior i same. It couldnt verify and am getting I 15:21:48 Writing LeadIn... W 15:21:52 Failed to Write Sectors 0 - 31 - Reason: Write Error Any thoughts on what could be the issue? Complete log for info: I 15:20:35 ImgBurn Version 2.5.8.0 started! I 15:20:35 Microsoft Windows 8 Enterprise x64 Edition (6.2, Build 9200) I 15:20:35 Total Physical Memory: 25,100,864 KiB - Available: 21,689,736 KiB I 15:20:35 Initialising SPTI... I 15:20:35 Searching for SCSI / ATAPI devices... I 15:20:35 -> Drive 1 - Info: DiscSoft Virtual 1.0 (K:) (Virtual) I 15:20:37 -> Drive 2 - Info: HL-DT-ST BD-RE BH16NS40 1.02-A0 (E:) (SATA) I 15:20:37 Found 1 BD-ROM XL and 1 BD-RE XL! W 15:21:02 Skipped Hidden File: H:\Photos\karuna family photos\New folder (2)\.nomedia I 15:21:27 Operation Started! I 15:21:27 Building Image Tree... I 15:21:33 Calculating Totals... I 15:21:33 Preparing Image... I 15:21:34 Contents: 8,193 Files, 76 Folders I 15:21:34 Content Type: Data I 15:21:35 Data Type: MODE1/2048 I 15:21:35 File System(s): UDF (1.02) I 15:21:35 Volume Label: photos1 I 15:21:35 Size: 24,545,037,562 bytes I 15:21:35 Sectors: 11,988,919 I 15:21:35 Image Size: 24,571,478,016 bytes I 15:21:35 Image Sectors: 11,997,792 I 15:21:37 Operation Successfully Completed! - Duration: 00:00:10 I 15:21:37 Operation Started! I 15:21:37 Source File: -==/\/[BUILD IMAGE]\/\==- I 15:21:37 Source File Sectors: 11,997,792 (MODE1/2048) I 15:21:37 Source File Size: 24,571,478,016 bytes I 15:21:37 Source File Volume Identifier: photos1 I 15:21:38 Source File Volume Set Identifier: 52317AAD00B71248 I 15:21:38 Source File Application Identifier: ImgBurn v2.5.8.0 I 15:21:38 Source File Implementation Identifier: ImgBurn I 15:21:38 Source File File System(s): UDF (1.02) I 15:21:38 Destination Device: [0:0:0] HL-DT-ST BD-RE BH16NS40 1.02 (E:) (SATA) I 15:21:38 Destination Media Type: BD-R (Disc ID: MBI-R06-000) I 15:21:38 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x I 15:21:38 Destination Media Sectors: 12,219,392 I 15:21:38 Write Mode: BD I 15:21:38 Write Type: DAO I 15:21:38 Write Speed: 4x I 15:21:38 Hardware Defect Management Active: No I 15:21:38 BD-R Verify Not Required: Yes I 15:21:38 Link Size: Auto I 15:21:38 Lock Volume: Yes I 15:21:38 Test Mode: No I 15:21:38 OPC: Yes I 15:21:38 BURN-Proof: Enabled I 15:21:38 Write Speed Successfully Set! - Effective: 17,984 KB/s (4x) I 15:21:48 Filling Buffer... (80 MiB) I 15:21:48 Writing LeadIn... W 15:21:52 Failed to Write Sectors 0 - 31 - Reason: Write Error W 15:21:52 Retrying (1 of 20)... I 15:21:54 Writing LeadIn... I 15:21:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 11997791) I 15:21:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11997791) I 15:44:51 Synchronising Cache... I 15:44:54 Closing Track... I 15:44:55 Finalising Disc... I 15:45:10 Exporting Graph Data... I 15:45:10 Graph Data File: C:\Users\Balu\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.02_SUNDAY-JANUARY-17-2021_3-21_PM_MBI-R06-000_4x.ibg I 15:45:10 Export Successfully Completed! I 15:45:11 Operation Successfully Completed! - Duration: 00:23:33 I 15:45:11 Average Write Rate: 17,438 KiB/s (4.0x) - Maximum Write Rate: 17,692 KiB/s (4.0x) I 15:45:11 Cycling Tray before Verify... W 15:45:26 Waiting for device to become ready... I 15:45:39 Device Ready! E 15:45:39 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 15:45:39 Verify Failed! - Reason: Layouts do not match.
  9. Not entirely sure what the .LOG file is for. It's probably definitely not standardized Audio CD format. You'd end up with a Mixed Mode CD adding that .LOG file, so you can probably disregard it. If you're going to create an Audio CD with FLAC files, you'll need to install madFLAC first before using ImgBurn to create the Audio CD.
  10. LIGHTNING UK!

    How do I made a CD from flac, cue, and log files?

    Indeed, that is the job of the CUE file. Open it in notepad and you'll probably see that it contain numerous 'track' entries. Load the CUE in Write mode and burn. *That's assuming you have a directshow filter installed that's capable of decoding flac files. If you don't, please refer to the bottom of the Audio CD guide here:
  11. Hello all, I'm new here. I'm trying to do something that I thought would be simple. Then when I couldn't, I thought finding an answer would be simple, given all the people out there who do this all the time. Boy was I wrong. I have not found one, straightforward answer on the internet which I cannot believe. I trying to do something very basic: for one particular album of songs by a certain band, I have ONE flac file (304 mB) which is ALL of the songs on the album, in one big file. Then it has its own CUE file, and there's an accompanying LOG file. Thats IT!!! I just want to make a CD and have all those 10 or so songs that are glued together in that one big FLAC file, separated into the 10 separate audio tracks on the final CD, which I thought was the job of the CUE sheet - to tell the CD burning software exactly where the spaces are so it can do it. Here's what I have: Band - Album.cue Band - Album.flac Band - Album.log
  12. LIGHTNING UK!

    i/o Error when making iso file of DVD

    You already asked this question here -
  13. cornholio7

    i/o Error when making iso file of DVD

    looks like your disc is copy protected, not something imgburn can help with
  14. imgburn doesn't complete making an iso file of my DVD. See attached file Error Message.docx
  15. LIGHTNING UK!

    Confusing write modes

    I guess because that's just what it defaults to? You can't make something from nothing though and 2048 bytes images only contain 'user data'. Nothing that writing in RAW mode would do anything for. Should you be so inclined, you can look up the structure of a CD sector and see the difference between 2448, 2352 and 2048 byte sectors. 2448 being the same as 2352, but with the added 96 bytes of subchannel.
  16. grep

    Confusing write modes

    OMG! Sorry, I'm still half asleep. >btw, as an ISO is meant to just be 2048 bytes per sector, you're wasting your time even looking at RAW writing. You don't have any data in the image that would benefit from being written that way. Then why would A120 try to do that?
  17. LIGHTNING UK!

    Confusing write modes

    I suggest you take a 2nd look at the name of the application you're using. What part of 'InfraRecorder' looks like 'ImgBurn' ? Getting back to the application this support forum is actually for... ImgBurn... that doesn't offer RAW at all. Your other thread is beginning to make a little more sense now. It seems you have your apps confused. btw, as an ISO is meant to just be 2048 bytes per sector, you're wasting your time even looking at RAW writing. You don't have any data in the image that would benefit from being written that way.
  18. grep

    Confusing write modes

    Why doesn't ImgBurn have just "RAW DAO"? There's 3 types of raw write - with extra chicken nuggets, with extra fries or with double dip. Well, not really with all the foodstuffs, but those names mean just as much to me because for the 20 years I have been using CD burning software I haven't ever seen something like 96r, 16 or 96p. Check out this competing software that does it right, in the second screenshot. Which mode in ImgBurn is just "RAW DAO"?
  19. LIGHTNING UK!

    Convert ImgBurn iso to bincue?

    ImgBurn outputs iso or bin/cue. I do not understand where you’re getting this toc and subchannel from?!
  20. Hello. I've been dumping several mixed-mode CDs with ImgBurn recently and the only way it seems, to make an image is to save its TOC and subchannel data. Once I got the dump ready, it appears to be really... non-standard. The .toc file doesn't look like a .toc file that cdrdao produces because it would be in plaintext with normal (LF) newlines. It's a binary file and I've no idea how to use it, or is it compatible with cdrdao. 00000000 00 39 01 01 01 14 00 a0 00 00 00 00 01 20 00 01 |.9........... ..| 00000010 10 00 a1 00 00 00 00 02 00 00 01 10 00 a2 00 00 |................| 00000020 00 00 3c 35 04 01 14 00 01 00 00 00 00 00 02 00 |..<5............| 00000030 01 10 00 02 00 00 00 00 38 35 04 42 04 |........85.B.| 0000003d If anyone's wondering, this is TOC+subchannel data for Formula 1 97 for PSX, PAL region. Is this kind of image compatible with cdrdao and if not, is there any easy way to convert it to a much more familiar bincue image? This is required to simplify my work. All of the images are stored and burned from a Linux host which has bincue images and cdrdao can burn them easily. Currently, I need to copy ImgBurn isos with the TOC to a Windows host, burn them to a CDRW with ImgBurn and then dump the CDRW into bincue. This takes usually up to an hour due to network speed and the fact the CDRW I have can only be burned with 10x speed and dumped back again at 5x-6x. Also Windows is slow on its own. I sure do enjoy heroically fighting with issues that do not exist on free operating systems.
  21. LIGHTNING UK!

    i/o Error

    Your disc is copy protected.
  22. What'sUPDoc

    i/o Error

    Hello, can anybody help with this? After doing ANY DVD on my disc in the background and doing Image burn from DVD to disc, I get the attached error message: i/o Error! SK interpretation: Illegal Request ASC/ASCQ interpretation: Copy Protection Key Exchange Failure - Authentication Failure IS there a fix for this error? Thankyou in advance for your efforts. ING BURN ERROR MESSAGE.docx
  23. Earlier
  24. ranshe7

    Extracting karaoke from DVD disc

    You can use imgburn to create a disk image and save it to your computer. Or simply copy the files to your computer's hard drive. Read the FAQ for this program.
  25. ranshe7

    Formatting and zeroing a new BD RE 50 GB

    What parameters should be set and how to format the BD-RE 50gb disk in ImgBurn correctly, so that it is really a disk of this size, and not less? Is there any step-by-step instructions?
  26. ranshe7

    wii iso roms

    Reinstall the system cleanly, remove everything from the boot disk, and then install ImgBurn and do not install anything else. The system is one program, and check the drive, only when these same errors appear again it will be possible to climb with" peace of mind " and change all sorts of system settings.
  27. dbminter

    Xbox 360 iso burning failed

    That log is an empty file.
  28. michael myers

    Xbox 360 iso burning failed

    I tried to burn a xbox 360 game into a dvd+r dl but this error keeps appearing, thanks advance for the help fix.log
  1. Load more activity
×

Important Information

By using this site, you agree to our Terms of Use.