Jump to content

Kenwood NAV Disc Burning Errors. Help Please


Avinitlarge
 Share

Recommended Posts

Hi

I made a backup of my original Sat nav disc, I created the ISO file then used Img Burn to burn it to a disc, The Disc was a Verbatim DVD-R. It all seemed to go well untill the end, I got the following messages. The Disc didnt work in my nav Drive Either

 

 

I 12:00:10 ImgBurn Version 2.4.4.0 started!

I 12:00:10 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 12:00:10 Total Physical Memory: 2,620,908 KB - Available: 1,629,692 KB

I 12:00:10 Initialising SPTI...

I 12:00:10 Searching for SCSI / ATAPI devices...

I 12:00:23 Found 1 CD-RW, 1 DVD-ROM, 1 DVD

Edited by Avinitlarge
Link to comment
Share on other sites

If you have any chance of backing up those type of disc's as in the past people have had trouble .. You should be at least using DVD+R DL(Verbatim MKM-001-00) as you can set the layerbreak on those and indeed on any DVD +R DL (you cannot specify where on - R DL)

Link to comment
Share on other sites

Thats fine then. Ive not got any good disc's left. Ive just burned the data to a cheapy unbranded DVD+R DL disc. My nav drive read it and it nearly worked ok. I recon, If I get a Verbatim DVD+R DL, It would work fine.

 

Thanks the help

Edited by Avinitlarge
Link to comment
Share on other sites

Ive got some Verbatim DVD+R DL discs. I am now having another problem with errors.

 

I 18:04:33 Operation Started!
I 18:04:33 Source File: H:\KNA MP-328 - burn with ImgBurn\KNA MP-328.mds
I 18:04:33 Source File Sectors: 4,129,968 (MODE1/2048)
I 18:04:33 Source File Size: 8,458,174,464 bytes
I 18:04:33 Source File Volume Identifier: 464210-8880
I 18:04:33 Source File Application Identifier: Session Offset : 0 VTC Sector Offset: 0
I 18:04:33 Source File Implementation Identifier: Smart Storage, Inc.
I 18:04:33 Source File File System(s): ISO9660, Joliet, UDF (1.02)
I 18:04:33 Destination Device: [0:1:0] ATAPI DVD A  DH20A4P 9P59 (E:) (ATA)
I 18:04:33 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)
I 18:04:33 Destination Media Sectors: 4,129,984
I 18:04:33 Write Mode: DVD
I 18:04:33 Write Type: DAO
I 18:04:34 Write Speed: 4x
I 18:04:34 Link Size: Auto
I 18:04:34 Lock Volume: Yes
I 18:04:34 Test Mode: No
I 18:04:34 OPC: No
I 18:04:34 BURN-Proof: Enabled
I 18:04:34 Book Type Setting: DVD-ROM
I 18:04:34 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 18:04:34 Optimal L0 Data Zone Capacity: 2,064,992
I 18:04:34 Optimal L0 Data Zone Method: Copied From Original Disc
I 18:04:34 Set L0 Data Zone Capacity Succeeded!
I 18:04:34 Filling Buffer... (40 MB)
I 18:04:35 Writing LeadIn...
I 18:05:48 Writing Session 1 of 1... (1 Track, LBA: 0 - 4129967)
I 18:05:48 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4129967)
I 18:05:48 Writing Layer 0... (LBA: 0 - 2064991)
W 18:06:00 Failed to Write Sectors 15616 - 15647 - Reason: Write Error
W 18:06:00 Retrying (1 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (2 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (3 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (4 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (5 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (6 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (7 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (8 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (9 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (10 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (11 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (12 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (13 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (14 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (15 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (16 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (17 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (18 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (19 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
W 18:06:06 Retrying (20 of 20)...
W 18:06:06 Retry Failed - Reason: Invalid Address For Write
E 18:09:34 Failed to Write Sectors 15616 - 15647 - Reason: Write Error
E 18:09:34 Next Writable Address: 0
I 18:09:34 Synchronising Cache...
W 18:09:37 User opted to skip the 'Close Track/Session/Disc' functions.
E 18:09:37 Failed to Write Image!
I 18:09:37 Exporting Graph Data...
I 18:09:37 Graph Data File: C:\Documents and Settings\Paul\Application Data\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH20A4P_9P59_16-JUNE-2009_18-04_MKM-003-00_4x.ibg
I 18:09:37 Export Successfully Completed!
E 18:09:37 Operation Failed! - Duration: 00:05:03
I 18:09:37 Average Write Rate: 138 KB/s (0.1x) - Maximum Write Rate: 5,645 KB/s (4.1x)

Edited by Avinitlarge
Link to comment
Share on other sites

clean lens and try 8x I prefer Verbatim MKM-001-00 2.4x as opposed to the 8x MKM-003-00 ones you have. Make sure your firmware on writer is latest which I pretty sure it is so try cleaning the lens and burning at the rated 8x speed.

 

 

Maybe the controller the writer is on and the driver is responsible. If using nforce chipset eg and you installed the nvidia ide storage driver, take it out via windows device manager removing controller letting windows assign its own standard controller and If using Jmicron controller update drivers etc.

Link to comment
Share on other sites

Ive cleaned the laser, It was spotless to start with though. The chipset is North Bridge SiS 748. Same problem though

 

I 18:41:27 ImgBurn Version 2.4.4.0 started!

I 18:41:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 18:41:27 Total Physical Memory: 2,620,908 KB - Available: 1,980,356 KB

I 18:41:27 Initialising SPTI...

I 18:41:27 Searching for SCSI / ATAPI devices...

I 18:41:28 Found 1 CD-RW, 1 DVD-ROM, 1 DVD

Link to comment
Share on other sites

Ive just tried another drive, It did burn something but not a great deal

 

I 20:44:07 ImgBurn Version 2.4.4.0 started!

I 20:44:07 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 20:44:07 Total Physical Memory: 2,620,908 KB - Available: 2,058,196 KB

I 20:44:07 Initialising SPTI...

I 20:44:07 Searching for SCSI / ATAPI devices...

I 20:44:07 Found 1 CD-RW, 1 DVD-ROM, 1 DVD

Link to comment
Share on other sites

Thanks for the reply, Its not that, I think its a problem with the drives. I ordered a Pioneer DVR-115D yesterday. I decided not to give up, Ive got 4 Verbs left. If i cant burn it with the New drive before the 4 discs run out, Then I truely give up

 

By the way, Is the drive Ive bought any good???

Link to comment
Share on other sites

My new drive came today, It was a Pioneer DVR-116D that came and not a Pioneer DVR-115D like I ordered. Anyway, The disc burned fine with no problems at all. It verified upto 100% without any problems. I ran Nero DiscSpeed and it it didnt support the drive. I tried the Trial Version of DVDInfoPro, I dont really understand whet it all means but, The results are as follows

 

post-10134-1245425201_thumb.png

post-10134-1245431964_thumb.png

 

 I 15:36:20 ImgBurn Version 2.4.4.0 started!

I 15:36:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:36:20 Total Physical Memory: 2,620,908 KB - Available: 1,944,316 KB

I 15:36:20 Initialising SPTI...

I 15:36:20 Searching for SCSI / ATAPI devices...

I 15:36:21 Found 1 DVD-ROM, 1 DVD

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.