Jump to content
Sign in to follow this  
Fang

Win 7 x64 CD/DVD burning problem

Recommended Posts

It seems Win 7 x64 is getting worse and worse about having problems burning CDs and DVDs. It's kind of a hit and miss effort. I get differant errors or can't find the burner drive or can't verfiy the image after burning, it may just hang or can't close the disk. In short, if you can thing of an error it's probably done it. I've tried 4 differant CD and DVD media type manufacers, mostly all cd-r or dvd-r and cd-rw and dvd-rw. It may burn the disk and then can't read it or no telling what it will come up with. There has been no errors with error numbers so I'm kind of at a loss on that. I've included my last imageburn log file.

 

Also, here's a write mode file.

 

Optiarc DVD+-RW AD-7200S 102A (RAID)

Current Profile: CD-R

 

Disc Information:

Status: Complete

State of Last Session: Complete

Erasable: No

Sessions: 1

Sectors: 556

Size: 1,138,688 bytes

Time: 00:09:31 (MM:SS:FF)

Supported Write Speeds: 8x, 16x, 24x, 32x, 40x, 48x

 

TOC Information:

Session 1... (LBA: 0 / 00:02:00)

-> Track 01 (Mode ???, LBA: 0 / 00:02:00)

-> LeadOut (LBA: 556 / 00:09:31)

 

ATIP Information:

Disc ID: 97m24s16f

Manufacturer: Sony Corp.

Start Time of LeadIn: 97m24s16f

Last Possible Start Time of LeadOut: 79m59s74f

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 556 (0x0000022C)

-> RS: 1,764 KB/s (10x) - WS: 1,411 KB/s (8x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 556 (0x0000022C)

-> RS: 3,528 KB/s (20x) - WS: 2,822 KB/s (16x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 556 (0x0000022C)

-> RS: 7,056 KB/s (40x) - WS: 4,234 KB/s (24x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 556 (0x0000022C)

-> RS: 7,056 KB/s (40x) - WS: 5,645 KB/s (32x)

Descriptor 5...

-> B0: 0x03, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 556 (0x0000022C)

-> RS: 7,056 KB/s (40x) - WS: 7,056 KB/s (40x)

Descriptor 6...

-> B0: 0x03, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 556 (0x0000022C)

-> RS: 8,467 KB/s (48x) - WS: 8,467 KB/s (48x)

Share this post


Link to post
Share on other sites
I've included my last imageburn log file.

That's not a log. It's disc information.

 

http://forum.imgburn.com/index.php?showtopic=14632

 

Sorry, my bad. Here's the log.

 

; //****************************************\\

; ImgBurn Version 2.5.1.0 - Log

; Saturday, 15 May 2010, 13:47:50

; \\****************************************//

;

;

I 13:46:57 ImgBurn Version 2.5.1.0 started!

I 13:46:57 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 13:46:57 Total Physical Memory: 6,288,868 KB - Available: 4,633,660 KB

W 13:46:57 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 13:46:57 Initialising SPTI...

I 13:46:57 Searching for SCSI / ATAPI devices...

I 13:46:57 -> Drive 1 - Info: AlViDrv BDDVDROM 3.2c (J:) (SCSI)

I 13:46:58 Close Request Acknowledged

I 13:46:58 Closing Down...

;

;

I 11:07:29 ImgBurn Version 2.5.1.0 started!

I 11:07:29 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 11:07:29 Total Physical Memory: 6,288,868 KB - Available: 4,740,068 KB

W 11:07:29 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 11:07:29 Initialising SPTI...

I 11:07:29 Searching for SCSI / ATAPI devices...

I 11:07:29 -> Drive 1 - Info: AlViDrv BDDVDROM 3.2c (J:) (SCSI)

I 11:07:29 -> Drive 2 - Info: Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 11:07:29 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 11:08:25 Operation Started!

I 11:08:25 Source File: D:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 11:08:25 Source File Sectors: 556 (MODE1/2048)

I 11:08:25 Source File Size: 1,138,688 bytes

I 11:08:25 Source File Volume Identifier: CDROM

I 11:08:25 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 11:08:25 Source File File System(s): ISO9660 (Bootable)

I 11:08:25 Destination Device: [3:1:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 11:08:25 Destination Media Type: CD-R (Disc ID: 97m24s16f, Sony Corp.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x)

I 11:08:25 Destination Media Sectors: 359,847

I 11:08:25 Write Mode: CD

I 11:08:25 Write Type: SAO

I 11:08:25 Write Speed: MAX

I 11:08:25 Lock Volume: Yes

I 11:08:25 Test Mode: No

I 11:08:25 OPC: No

I 11:08:25 BURN-Proof: Enabled

I 11:08:25 Write Speed Successfully Set! - Effective: 8,467 KB/s (48x)

I 11:08:26 Filling Buffer... (40 MB)

I 11:08:26 Writing LeadIn...

I 12:54:12 Abort Request Acknowledged

Share this post


Link to post
Share on other sites

Have you tried to attach the burner to a non RAID connector?

 

RAIDS + optical drives are normally not a happy marriage.

 

Could also see if you have the latest chip set drivers installed.

 

http://www.ma-config.com/

Share this post


Link to post
Share on other sites

Have you tried to attach the burner to a non RAID connector?

 

RAIDS + optical drives are normally not a happy marriage.

 

Could also see if you have the latest chip set drivers installed.

 

http://www.ma-config.com/

 

Now I'm really confused???? Although RAID is available it's not turned on. I've added another drive some time ago but haven't touched the DVD drive or it's connections, yet it's reported in the log as being on RAID. I'm not versed in RAID so any help getting it off RAID will be appreciated.

Share this post


Link to post
Share on other sites

It is connected to a RAID port on mainboard. They look the same but they are controlled by different chips.

 

You have to identify wich one are regular and wich are RAID ports. Offen regular SATA are red colored and RAID are diffrent.

 

Check with your mainboard manual and move the burner to a regular SATA connection.

Share this post


Link to post
Share on other sites

It is connected to a RAID port on mainboard. They look the same but they are controlled by different chips.

 

You have to identify wich one are regular and wich are RAID ports. Offen regular SATA are red colored and RAID are diffrent.

 

Check with your mainboard manual and move the burner to a regular SATA connection.

 

I looked at the connections on the motherboard and the DVD drive is connected to a SATA connection and in BIOS it's set as sata also. Although the MB has RAID capability it is not turned on nor never has been. Why would the DVD drive be reported as being RAID when RAID was never setup on the computer? Now I am confused! lol Could it be something corrupt in the BIOS? There is an update to the BIOS, should I flash it?

Thx for all your help!

Share this post


Link to post
Share on other sites

That's why updates are for. Flash it! Are there any info what's chaged in new version?

 

And also you could update chipset/controller drivers too.

Share this post


Link to post
Share on other sites

That's why updates are for. Flash it! Are there any info what's chaged in new version?

 

And also you could update chipset/controller drivers too.

 

Still at a loss. I've updated everything on the site u gave me http://www.ma-config.com/ including BIOS. I've unpluged the dvd drive after uninstalling it from device manager and it is still reported as RAID in imageburn.

Share this post


Link to post
Share on other sites

Do you know what model of mother board you have?

 

(It should be stated in the list in the ma-config.com page.)

Share this post


Link to post
Share on other sites

Do you know what model of mother board you have?

 

(It should be stated in the list in the ma-config.com page.)

 

Motherboard: SMBios version 2.5

Dell Inc 0PP150 A00

Bios: Dell Inc. 1.0.13 05/05/2009 taille: 1024Kb

 

 

Chipset: North bridge: NVIDIA C55

South bridge: NVIDIA nForce 410/430 (MCP51)

Share this post


Link to post
Share on other sites

There should be other SATA connectors on that mother board to use at #26. Not all can be RAID.

 

druid_s7.jpg

 

http://support.dell.com/support/edocs/systems/xps630i/en/SM/HTML/techov.htm#wp1180262

 

Have you tried to attach the burner to another SATA connector?

 

Yes, just done that and it's still the same. It never has it as RAID in the device manager, should it or would it?

Share this post


Link to post
Share on other sites

Have you been in to BIOS and seen what the settings are in there?

Share this post


Link to post
Share on other sites

Have you been in to BIOS and seen what the settings are in there?

 

Yep, BIOS is set to SATA and RAID is not active (disabled) as it always has been. That's what's so confusing about this drive being reported as RAID.

Share this post


Link to post
Share on other sites

Have you installed this driver package? You could also try burning at 16x or 24x instead of MAX.

 

Installed that driver package, no joy, still reported by imageburn as a RAID drive. I've tried differant burn speeds as low as 1 but still the same, coasters!

Share this post


Link to post
Share on other sites

Well, then try booting with RAID enabled in the system's BIOS just to see if it works.

Share this post


Link to post
Share on other sites

Well, then try booting with RAID enabled in the system's BIOS just to see if it works.

 

Rather not do that as I understand that I'll lose everything on the drive when I disable raid again. I don't like or need raid, that's why it's never been enabled. On boot the black screen says that raid is disabled.

BTW, is there a registry value that sets this drive to raid that I could change?

Share this post


Link to post
Share on other sites

Nope, as that information is provided by the driver. As for trying with RAID enabled, the driver should detect the change by itself, or else Windows just won't boot. In that case disabling RAID in the BIOS would take it back as it was and it'll work again.

 

Does it hang if you try with Test Mode enabled? Please try with CD-R and DVD-R too if you can.

Share this post


Link to post
Share on other sites

Nope, as that information is provided by the driver. As for trying with RAID enabled, the driver should detect the change by itself, or else Windows just won't boot. In that case disabling RAID in the BIOS would take it back as it was and it'll work again.

 

Does it hang if you try with Test Mode enabled? Please try with CD-R and DVD-R too if you can.

 

Nope, didn't hang in test mode with either CD-R or DVD-R. Checked BIOS again and RAID is still disabled. Installed a LG Super Multi 24x I had and it's reported by imageburn as RAID also. After enabling RAID in BIOS it come up and wanted me to set an array. At that point I got out of it, mainly cause I don't know anything about raid. Went back into BIOS, disabled RAID and set sata 1 n 2 (the DVD drives) back to sata instead of RAID. Both DVD drives are still showing RAID in imageburn. Being new to imageburn I have to ask, could imageburn be reporting them wrong? Other than the BIOS, what sets RAID on these drives?

Share this post


Link to post
Share on other sites

That value comes from the Windows drivers. They're probably always running in a RAID type config, even if no RAID array has actually been configured.

 

Some drivers, especially Nvidia ones, seem to do that an awful lot.

Share this post


Link to post
Share on other sites

That value comes from the Windows drivers. They're probably always running in a RAID type config, even if no RAID array has actually been configured.

 

Some drivers, especially Nvidia ones, seem to do that an awful lot.

 

Any way to replace Nvida's RAID drivers to just good old SATA drivers? Guess there's no way to replace the BIOS for one without RAID?

 

Just had a thought: Although imageburn reports the drives as RAID and windows device manager doesn't ( or would it?) could my bruning problem lie somewhere else?

Edited by Fang

Share this post


Link to post
Share on other sites

Can you post a log from a DVD burn please?

 

Try as many different DVD formats as you own. (DVD-R, DVD-RW, DVD+R, DVD+RW etc)

 

You could try uninstalling everything nvidia related from 'programs and features' in control panel and then uninstalling the controllers (inc the driver if that's an option) from within Device Manager and rebooting.

Share this post


Link to post
Share on other sites

Can you post a log from a DVD burn please?

 

Try as many different DVD formats as you own. (DVD-R, DVD-RW, DVD+R, DVD+RW etc)

 

You could try uninstalling everything nvidia related from 'programs and features' in control panel and then uninstalling the controllers (inc the driver if that's an option) from within Device Manager and rebooting.

Uninstalled everything Nvidia ask you suggested and it was reinstalled on boot. DVD drives still seen as RAID in imageburn but not in device manager.

 

Here are the logs from my burns with the disk that I have. I also tried a couple of imation DVD-RWs and a Sony DVD-RW but the optiarc drive wouldn't see them, although they work fine on my xp system. Another note of interest is that imageburn doesn't see the Drive 2 - Info: HL-DT-ST DVDRAM GH24LS50 YP01 (D:) (RAID) for writing noted in the log. Should imageburn be reinstalled to see it, as I just installed that drive.

OKay, here's the logs in order in burns:

 

CD-RW burn:

 

I 15:07:42 ImgBurn Version 2.5.1.0 started!

I 15:07:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 15:07:42 Total Physical Memory: 6,288,868 KB - Available: 4,747,908 KB

W 15:07:42 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:07:42 Initialising SPTI...

I 15:07:42 Searching for SCSI / ATAPI devices...

I 15:07:42 -> Drive 1 - Info: AlViDrv BDDVDROM 3.2c (J:) (SCSI)

I 15:07:42 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24LS50 YP01 (D:) (RAID)

I 15:07:42 -> Drive 3 - Info: Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:07:42 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 15:10:56 Operation Started!

I 15:10:56 Source File: G:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 15:10:56 Source File Sectors: 556 (MODE1/2048)

I 15:10:56 Source File Size: 1,138,688 bytes

I 15:10:56 Source File Volume Identifier: CDROM

I 15:10:56 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 15:10:56 Source File File System(s): ISO9660 (Bootable)

I 15:10:56 Destination Device: [4:0:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:10:56 Destination Media Type: CD-RW (Disc ID: 97m32s11f, Prodisc Technology Inc.) (Speeds: 4x)

I 15:10:56 Destination Media Sectors: 335,098

I 15:10:56 Write Mode: CD

I 15:10:56 Write Type: SAO

I 15:10:56 Write Speed: 4x

I 15:10:56 Lock Volume: Yes

I 15:10:56 Test Mode: No

I 15:10:56 OPC: No

I 15:10:56 BURN-Proof: Enabled

I 15:10:56 Write Speed Successfully Set! - Effective: 706 KB/s (4x)

I 15:10:57 Filling Buffer... (40 MB)

I 15:10:57 Writing LeadIn...

W 15:12:37 Failed to Write Sectors 288 - 319 - Reason: Write Error

W 15:12:37 Retrying (1 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (2 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (3 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (4 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (5 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (6 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (7 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (8 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (9 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (10 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (11 of 20)...

W 15:12:37 Retry Failed - Reason: Invalid Address For Write

W 15:12:37 Retrying (12 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (13 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (14 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (15 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (16 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (17 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (18 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (19 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:12:38 Retrying (20 of 20)...

W 15:12:38 Retry Failed - Reason: Invalid Address For Write

W 15:13:29 Retrying (21)...

W 15:13:29 Retry Failed - Reason: Invalid Address For Write

W 15:13:30 Retrying (22)...

W 15:13:30 Retry Failed - Reason: Invalid Address For Write

W 15:13:31 Retrying (23)...

W 15:13:31 Retry Failed - Reason: Invalid Address For Write

W 15:13:32 Retrying (24)...

W 15:13:32 Retry Failed - Reason: Invalid Address For Write

W 15:13:33 Retrying (25)...

W 15:13:33 Retry Failed - Reason: Invalid Address For Write

W 15:13:33 Retrying (26)...

W 15:13:33 Retry Failed - Reason: Invalid Address For Write

W 15:13:34 Retrying (27)...

W 15:13:34 Retry Failed - Reason: Invalid Address For Write

W 15:13:38 Retrying (28)...

W 15:13:38 Retry Failed - Reason: Invalid Address For Write

W 15:13:40 Retrying (29)...

W 15:13:40 Retry Failed - Reason: Invalid Address For Write

W 15:13:43 Retrying (30)...

W 15:13:43 Retry Failed - Reason: Invalid Address For Write

W 15:13:43 Retrying (31)...

W 15:13:43 Retry Failed - Reason: Invalid Address For Write

W 15:13:44 Retrying (32)...

W 15:13:44 Retry Failed - Reason: Invalid Address For Write

W 15:13:45 Retrying (33)...

W 15:13:45 Retry Failed - Reason: Invalid Address For Write

W 15:13:45 Retrying (34)...

W 15:13:45 Retry Failed - Reason: Invalid Address For Write

W 15:13:45 Retrying (35)...

W 15:13:46 Retry Failed - Reason: Invalid Address For Write

E 15:13:47 Failed to Write Sectors 288 - 319 - Reason: Write Error

E 15:13:47 Next Writable Address: 0

I 15:13:47 Synchronising Cache...

E 15:13:55 Failed to Write Image!

E 15:13:55 Operation Failed! - Duration: 00:02:59

I 15:13:55 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

 

 

CD-R burn:

 

I 15:15:29 ImgBurn Version 2.5.1.0 started!

I 15:15:29 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 15:15:29 Total Physical Memory: 6,288,868 KB - Available: 4,721,132 KB

W 15:15:29 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:15:29 Initialising SPTI...

I 15:15:29 Searching for SCSI / ATAPI devices...

I 15:15:29 -> Drive 1 - Info: AlViDrv BDDVDROM 3.2c (J:) (SCSI)

I 15:15:30 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24LS50 YP01 (D:) (RAID)

I 15:15:30 -> Drive 3 - Info: Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:15:30 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 15:15:55 Operation Started!

I 15:15:55 Source File: G:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 15:15:55 Source File Sectors: 556 (MODE1/2048)

I 15:15:55 Source File Size: 1,138,688 bytes

I 15:15:55 Source File Volume Identifier: CDROM

I 15:15:55 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 15:15:55 Source File File System(s): ISO9660 (Bootable)

I 15:15:55 Destination Device: [4:0:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:15:55 Destination Media Type: CD-R (Disc ID: 97m24s16f, Sony Corp.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x)

I 15:15:55 Destination Media Sectors: 359,847

I 15:15:55 Write Mode: CD

I 15:15:55 Write Type: SAO

I 15:15:55 Write Speed: 4x

I 15:15:55 Lock Volume: Yes

I 15:15:55 Test Mode: No

I 15:15:55 OPC: No

I 15:15:55 BURN-Proof: Enabled

W 15:15:55 Write Speed Miscompare! - Wanted: 706 KB/s (4x), Got: 1,411 KB/s (8x)

I 15:15:56 Filling Buffer... (40 MB)

I 15:15:56 Writing LeadIn...

I 15:16:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 555)

I 15:16:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 555)

I 15:16:25 Synchronising Cache...

I 15:16:45 Exporting Graph Data...

I 15:16:45 Graph Data File: C:\Users\Steve\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD+-RW_AD-7200S_102A_TUESDAY-MAY-18-2010_3-15_PM_97m24s16f_4x.ibg

I 15:16:45 Export Successfully Completed!

I 15:16:45 Operation Successfully Completed! - Duration: 00:00:49

I 15:16:45 Average Write Rate: 1,112 KB/s (7.4x) - Maximum Write Rate: 1,112 KB/s (7.4x)

I 15:16:45 Cycling Tray before Verify...

W 15:16:52 Waiting for device to become ready...

I 15:16:58 Device Ready!

I 15:16:58 Operation Started!

I 15:16:58 Source Device: [4:0:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:16:58 Source Media Type: CD-R (Disc ID: 97m24s16f) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x)

I 15:16:58 Image File: G:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 15:16:58 Image File Sectors: 556 (MODE1/2048)

I 15:16:58 Image File Size: 1,138,688 bytes

I 15:16:58 Image File Volume Identifier: CDROM

I 15:16:58 Image File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 15:16:58 Image File File System(s): ISO9660 (Bootable)

I 15:16:58 Read Speed (Data/Audio): MAX / MAX

I 15:16:59 Verifying Session 1 of 1... (1 Track, LBA: 0 - 555)

I 15:16:59 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 555)

I 15:17:01 Exporting Graph Data...

I 15:17:01 Graph Data File: C:\Users\Steve\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD+-RW_AD-7200S_102A_TUESDAY-MAY-18-2010_3-15_PM_97m24s16f_4x.ibg

I 15:17:01 Export Successfully Completed!

I 15:17:01 Operation Successfully Completed! - Duration: 00:00:02

I 15:17:01 Average Verify Rate: 1,112 KB/s (7.4x) - Maximum Verify Rate: 1,112 KB/s (7.4x)

 

 

DVD-R burn:

 

I 15:18:32 ImgBurn Version 2.5.1.0 started!

I 15:18:32 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 15:18:32 Total Physical Memory: 6,288,868 KB - Available: 4,732,592 KB

W 15:18:32 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:18:32 Initialising SPTI...

I 15:18:32 Searching for SCSI / ATAPI devices...

I 15:18:32 -> Drive 1 - Info: AlViDrv BDDVDROM 3.2c (J:) (SCSI)

I 15:18:32 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24LS50 YP01 (D:) (RAID)

I 15:18:32 -> Drive 3 - Info: Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:18:32 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 15:18:55 Operation Started!

I 15:18:55 Source File: G:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 15:18:55 Source File Sectors: 556 (MODE1/2048)

I 15:18:55 Source File Size: 1,138,688 bytes

I 15:18:55 Source File Volume Identifier: CDROM

I 15:18:55 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 15:18:55 Source File File System(s): ISO9660 (Bootable)

I 15:18:55 Destination Device: [4:0:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:18:55 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 15:18:55 Destination Media Sectors: 2,298,496

I 15:18:55 Write Mode: DVD

I 15:18:55 Write Type: DAO

I 15:18:55 Write Speed: 4x

I 15:18:55 Link Size: Auto

I 15:18:55 Lock Volume: Yes

I 15:18:55 Test Mode: No

I 15:18:55 OPC: No

I 15:18:55 BURN-Proof: Enabled

I 15:18:55 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 15:18:55 Filling Buffer... (40 MB)

I 15:18:56 Writing LeadIn...

I 15:19:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 555)

I 15:19:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 555)

I 15:19:24 Synchronising Cache...

I 15:22:53 Exporting Graph Data...

I 15:22:53 Graph Data File: C:\Users\Steve\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD+-RW_AD-7200S_102A_TUESDAY-MAY-18-2010_3-18_PM_CMC_MAG._AM3_4x.ibg

I 15:22:53 Export Successfully Completed!

I 15:22:53 Operation Successfully Completed! - Duration: 00:03:58

I 15:22:53 Average Write Rate: N/A - Maximum Write Rate: N/A

I 15:22:53 Cycling Tray before Verify...

W 15:23:00 Waiting for device to become ready...

I 15:23:10 Device Ready!

I 15:23:10 Operation Started!

I 15:23:10 Source Device: [4:0:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:23:10 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 15:23:10 Image File: G:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 15:23:10 Image File Sectors: 556 (MODE1/2048)

I 15:23:10 Image File Size: 1,138,688 bytes

I 15:23:10 Image File Volume Identifier: CDROM

I 15:23:10 Image File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 15:23:10 Image File File System(s): ISO9660 (Bootable)

I 15:23:10 Read Speed (Data/Audio): MAX / MAX

I 15:23:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 555)

I 15:23:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 555)

I 15:23:14 Exporting Graph Data...

I 15:23:14 Graph Data File: C:\Users\Steve\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD+-RW_AD-7200S_102A_TUESDAY-MAY-18-2010_3-18_PM_CMC_MAG._AM3_4x.ibg

I 15:23:14 Export Successfully Completed!

I 15:23:14 Operation Successfully Completed! - Duration: 00:00:03

I 15:23:14 Average Verify Rate: 370 KB/s (0.3x) - Maximum Verify Rate: 370 KB/s (0.3x)

 

 

DVD-RW burn:

 

I 15:27:21 ImgBurn Version 2.5.1.0 started!

I 15:27:21 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 15:27:21 Total Physical Memory: 6,288,868 KB - Available: 4,719,156 KB

W 15:27:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:27:21 Initialising SPTI...

I 15:27:21 Searching for SCSI / ATAPI devices...

I 15:27:21 -> Drive 1 - Info: AlViDrv BDDVDROM 3.2c (J:) (SCSI)

I 15:27:21 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24LS50 YP01 (D:) (RAID)

I 15:27:21 -> Drive 3 - Info: Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:27:21 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!

I 15:31:10 Operation Started!

I 15:31:10 Source File: G:\Burn Test\memtest86-3.5.iso\Memtest86_3.5.iso

I 15:31:10 Source File Sectors: 556 (MODE1/2048)

I 15:31:10 Source File Size: 1,138,688 bytes

I 15:31:10 Source File Volume Identifier: CDROM

I 15:31:10 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM

I 15:31:10 Source File File System(s): ISO9660 (Bootable)

I 15:31:10 Destination Device: [4:0:0] Optiarc DVD+-RW AD-7200S 102A (F:) (RAID)

I 15:31:10 Destination Media Type: DVD-RW (Disc ID: RITEKW01) (Speeds: 2x)

I 15:31:10 Destination Media Sectors: 2,298,496

I 15:31:10 Write Mode: DVD

I 15:31:10 Write Type: DAO

I 15:31:10 Write Speed: 4x

I 15:31:10 Link Size: Auto

I 15:31:10 Lock Volume: Yes

I 15:31:10 Test Mode: No

I 15:31:10 OPC: No

I 15:31:10 BURN-Proof: Enabled

W 15:31:10 Write Speed Miscompare! - Wanted: 5,540 KB/s (4x), Got: 2,770 KB/s (2x)

I 15:31:11 Filling Buffer... (40 MB)

I 15:31:11 Writing LeadIn...

W 15:32:32 Failed to Write Sectors 0 - 31 - Reason: No Seek Complete

W 15:32:33 Retrying (1 of 20)...

 

NOTE: After nine mintues requested abort. 10 mintues after abort request I had to end the process to stop imageburn

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.