Jump to content
Sign in to follow this  
scarboro99

Won't finalize disk

Recommended Posts

Tried to burn ISO to DVD+R DL. Memorex disk. Reported write was ok but did not close. I have attached log file. Please advise.

Thanks for a great program.

Share this post


Link to post
Share on other sites

Sorry, attached the file as a txt doc. I looked at the link. Have had the same with verbatum disk as well. Tried Cyberlink (sorry) and it worked. Same file in your great program failed. Maybe Windows 8 tomorroy?

 

I 12:21:41 ImgBurn Version 2.5.7.0 started!

I 12:21:41 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 12:21:41 Total Physical Memory: 12,581,176 KB - Available: 10,371,848 KB

I 12:21:41 Initialising SPTI...

I 12:21:41 Searching for SCSI / ATAPI devices...

I 12:21:44 -> Drive 1 - Info: HL-DT-ST BD-RE BH14NS40 1.00-N1 (F:) (ATA)

I 12:21:45 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S202N SB02 (G:) (ATA)

I 12:21:46 -> Drive 3 - Info: TSSTcorp CDDVDW SH-S223Q SB03 (H:) (ATA)

I 12:21:46 -> Drive 4 - Info: DVDFab Virtual Drive 1.1 (M:) (SCSI)

I 12:21:46 Found 2 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!

I 12:22:20 Operation Started!

I 12:22:20 Source File: E:\Movies\Work\2\My DVD.iso

I 12:22:20 Source File Sectors: 3,122,912 (MODE1/2048)

I 12:22:20 Source File Size: 6,395,723,776 bytes

I 12:22:20 Source File Volume Identifier: My DVD

I 12:22:20 Source File Volume Set Identifier: 41579103________My DVD

I 12:22:20 Source File Implementation Identifier: VsoSoftware

I 12:22:20 Source File File System(s): ISO9660, UDF (1.02)

I 12:22:20 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202N SB02 (G:) (ATA)

I 12:22:20 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65)

I 12:22:20 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 12:22:20 Destination Media Sectors: 4,173,824

I 12:22:20 Write Mode: DVD

I 12:22:20 Write Type: DAO

I 12:22:20 Write Speed: MAX

I 12:22:20 DVD+R DL Reserve Track: No

I 12:22:20 Link Size: Auto

I 12:22:20 Lock Volume: Yes

I 12:22:20 Test Mode: No

I 12:22:20 OPC: No

I 12:22:20 BURN-Proof: Enabled

I 12:22:20 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)

I 12:22:20 Book Type Setting: DVD-ROM

I 12:22:30 Optimal L1 Data Zone Start LBA: 1818048 (VTS_02_0.IFO)

I 12:22:30 Optimal L0 Data Zone Capacity: 1,818,048

I 12:22:30 Optimal L0 Data Zone Method: File System File Start LBA

I 12:23:23 Set L0 Data Zone Capacity Succeeded!

I 12:23:23 Filling Buffer... (80 MB)

I 12:23:25 Writing LeadIn...

I 12:23:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3122911)

I 12:23:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3122911)

I 12:23:27 Writing Layer 0... (LBA: 0 - 1818047)

I 12:30:40 Writing Layer 1... (LBA: 1818048 - 3122911)

I 12:34:46 Synchronising Cache...

I 12:34:53 Closing Track...

I 12:34:56 Finalising Disc...

W 12:37:59 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out

W 12:37:59 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

W 12:37:59 Retrying (1 of 3)...

W 12:40:03 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out

W 12:40:03 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 12:40:03 Retrying (2 of 3)...

W 12:41:05 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 12:41:05 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 12:41:05 Retrying (3 of 3)...

W 12:42:04 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 12:42:05 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 12:42:20 Retrying (4)...

W 12:43:26 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 12:43:26 Retry Failed - Reason: Session Fixation Error Writing Lead In

I 12:43:30 Exporting Graph Data...

I 12:43:30 Graph Data File: C:\Users\David\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S202N_SB02_TUESDAY-OCTOBER-23-2012_12-22_PM_MBIPG101-R10-65_MAX.ibg

I 12:43:30 Export Successfully Completed!

I 12:43:30 Operation Successfully Completed! - Duration: 00:21:09

I 12:43:30 Average Write Rate: 9,212 KB/s (6.7x) - Maximum Write Rate: 11,123 KB/s (8.0x)

I 12:43:30 Cycling Tray before Verify...

W 12:43:37 Waiting for device to become ready...

I 12:44:22 Device Ready!

E 12:44:22 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)

E 12:44:22 Verify Failed! - Reason: Layouts do not match.

 

Anything I can do will be appreciated. Oh yes, original ISO created with VSO convertXtoDVD 5. Thanks

Share this post


Link to post
Share on other sites

Your drive errored out, not the program.

 

You have 3 drives, try one of the others... maybe it'll do a better job on the cheapo discs.

 

Writing at as speed other than 'MAX' (i.e. 8x for that drive/firmware/media combo) may also help.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.