rastaplasta Posted July 8, 2013 Share Posted July 8, 2013 (edited) Hello, I was trying to burn a BR 25GB. I did this before and always everything worked fine. First I tried it bruning an image file. But I got the Erro message: Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Then I used DVD Fab to create regular BR movie folders and tried again burning them with img burn. Again, I got the same error message. I don't know what this would mean, as the drive worked always fine, also I used the same media, means the same Blu-ray of the same package, already burnt a lot with no errors. Trying to find help in this forum I didn't find a useful answer. When trying to finalise the disk manually, via the close disk options I get an I/O error message. So does someone know what the problem could be? Since last burning I didn't change anything in my system except updating Quick Time. Could this be a catalyst producing errors? I 20:50:02 ImgBurn Version 2.5.5.0 started!I 20:50:02 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack1)I 20:50:02 Total Physical Memory: 12.581.360 KB - Available: 10.230.984 KBI 20:50:02 Initialising SPTI...I 20:50:02 Searching for SCSI / ATAPI devices...I 20:50:02 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.01 (H:) (ATAPI)I 20:50:03 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22LS50 TL03 (I:) (ATAPI)I 20:50:03 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (J:) (SCSI)I 20:50:03 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE!I 20:50:20 Operation Started!I 20:50:20 Building Image Tree...I 20:50:28 Calculating Totals...I 20:50:28 Preparing Image...I 20:50:29 Contents: 201 Files, 16 FoldersI 20:50:29 Content Type: BD VideoI 20:50:29 Data Type: MODE1/2048I 20:50:29 File System(s): UDF (2.50)I 20:50:29 Volume Label: xxxxxxI 20:50:29 Size: 23.589.627.941 bytesI 20:50:29 Sectors: 11.518.486I 20:50:29 Image Size: 23.591.649.280 bytesI 20:50:29 Image Sectors: 11.519.360I 20:50:34 Operation Successfully Completed! - Duration: 00:00:13I 20:50:34 Operation Started!I 20:50:34 Source File: -==/\/[bUILD IMAGE]\/\==-I 20:50:34 Source File Sectors: 11.519.360 (MODE1/2048)I 20:50:34 Source File Size: 23.591.649.280 bytesI 20:50:34 Source File Volume Identifier: xxxxxxI 20:50:34 Source File Volume Set Identifier: 42E8A64A00AFC456I 20:50:34 Source File Application Identifier: ImgBurn v2.5.5.0I 20:50:34 Source File Implementation Identifier: ImgBurnI 20:50:34 Source File File System(s): UDF (2.50)I 20:50:34 Destination Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.01 (H:) (ATAPI)I 20:50:34 Destination Media Type: BD-R (Disc ID: LGEBRA-S04-000) (Speeds: 2x; 4x;6x; 8x; 10x)I 20:50:34 Destination Media Sectors: 12.219.392I 20:50:34 Write Mode: BDI 20:50:34 Write Type: DAOI 20:50:34 Write Speed: 2xI 20:50:34 BD-R Verify Not Required: YesI 20:50:34 Link Size: AutoI 20:50:34 Lock Volume: YesI 20:50:34 Test Mode: NoI 20:50:34 OPC: NoI 20:50:34 BURN-Proof: EnabledI 20:50:34 Write Speed Successfully Set! - Effective: 8.991 KB/s (2x)I 20:51:06 Filling Buffer... (40 MB)I 20:51:08 Writing LeadIn...W 20:51:17 Failed to Write Sectors 0 - 31 - Reason: Program Memory Area UpdateFailureW 20:51:17 Retrying (1 of 20)...I 20:51:17 Writing LeadIn...I 20:51:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 11519359)I 20:51:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11519359)I 21:35:14 Synchronising Cache...I 21:35:22 Closing Track...I 21:35:23 Finalising Disc...W 21:35:29 Finalise Disc Failed! - Reason: Cannot Write Medium - IncompatibleFormatW 21:35:29 Retrying (1 of 3)...W 21:35:29 Retry Failed - Reason: Cannot Write Medium - Incompatible FormatW 21:35:29 Retrying (2 of 3)...W 21:35:29 Retry Failed - Reason: Cannot Write Medium - Incompatible FormatW 21:35:29 Retrying (3 of 3)...W 21:35:29 Retry Failed - Reason: Cannot Write Medium - Incompatible FormatE 21:55:31 Finalise Disc Failed! - Reason: Cannot Write Medium - IncompatibleFormatE 21:55:31 Failed to Write Image!I 21:55:31 Exporting Graph Data...I 21:55:31 Graph Data File: C:\Users\xxx\AppData\Roaming\ImgBurn\GraphData Files\HL-DT-ST_BD-RE_BH10LS30_1.01_MONTAG-8-JULI-2013_20-50_LGEBRA-S04-000_2x.ibgI 21:55:31 Export Successfully Completed!E 21:55:31 Operation Failed! - Duration: 01:04:57I 21:55:31 Average Write Rate: 8.740 KB/s (1.9x) - Maximum Write Rate: 9.061 KB/s(2.0x) Update:I treid again burning the original image file but this time with Ashampoo Burning Studio 2010. And it worked, no error messages! So it seems not to be a hardware problem, isn't it? Any clue, what this could be? Edited July 8, 2013 by rastaplasta Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 8, 2013 Share Posted July 8, 2013 Try the other supported write speeds. Maybe 2x isn't up to the job. The error at the start of the burn shouldn't be ignored. There are newer versions of ImgBurn available too. Link to comment Share on other sites More sharing options...
rastaplasta Posted July 9, 2013 Author Share Posted July 9, 2013 Thanks for your quick answer. But what do you mean with "the error at the start"? Cant see no error when starting. The write speed 2x is what I did the whole time. I burnt many BR with this and it always worked. As I wrote, I didn't change a thing. I am using the same img burn version, the same write speed, the same media type even of the same package, and suddenly there is this error. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 9, 2013 Share Posted July 9, 2013 This is the error at the start... I 20:51:08 Writing LeadIn... W 20:51:17 Failed to Write Sectors 0 - 31 - Reason: Program Memory Area Update Of all the things you've mentioned (drive, media, software), hopefully you understand that the software (ImgBurn) is the one thing that doesn't change. It doesn't wear out with age / usage or get dusty / dirty to the point where its performance is compromised. It'll send exactly the same commands to the drive on its 1,000,000th usage that it did on its 1st. Link to comment Share on other sites More sharing options...
Recommended Posts