Jump to content

how to close disk.


dirio49
 Share

Recommended Posts

Hi. i have dvd that vhc to dvd recorded and the computer cannot read it. the dvd recorder can read it.

 how  do i go about finalizing the disk .

thanks

 

when i do  close session or disk i get

---------------------------
ImgBurn
---------------------------
I/O Error!

Device: [2:0:0] ATAPI iHAS124   Y BL0X (E:) (SATA)

ScsiStatus: 0x02
Interpretation: Check Condition

CDB: 5B 00 02 00 00 00 00 00 00 00
Interpretation: Close Track/Session

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00 00 00
SK Interpretation: Illegal Request
ASC/ASCQ Interpretation: Session Fixation Error - Incomplete Track in Session
---------------------------
Retry   Cancel   
---------------------------

ATAPI iHAS124   Y BL0X (SATA)
Current Profile: DVD+R

Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 270,256
Free Space: 553,484,288 bytes
Free Time: 60:05:31 (MM:SS:FF)
Next Writable Address: 2024848
MID: TDK-003-00
Supported Read Speeds: 5x, 8x, 12x, 16x
Current Read Speed: 6.6x - 16x

Track Information:
Session 1...
-> Track 01 (LTSA: 0, LTS: 15872, LRA: 0)
-> Track 02 (LTSA: 15888, LTS: 2008944, LRA: 0)
-> Track 03 (LTSA: 2024848, LTS: 270256, LRA: 0)

Physical Format Information (ADIP):
Disc ID: TDK-003-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: TDK-003-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

ATAPI iHAS124   Y BL0X (SATA)
Current Profile: DVD+R

Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 270,256
Free Space: 553,484,288 bytes
Free Time: 60:05:31 (MM:SS:FF)
Next Writable Address: 2024848
MID: TDK-003-00
Supported Write Speeds: 4x, 6x, 8x, 12x, 16x, 18x

Physical Format Information (ADIP):
Disc ID: TDK-003-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: TDK-003-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 6,925 KB/s (5x) - WS: 5,540 KB/s (4x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 11,080 KB/s (8x) - WS: 8,310 KB/s (6x)
Descriptor 3...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 11,080 KB/s (8x) - WS: 11,080 KB/s (8x)
Descriptor 4...
-> B0: 0x03, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 16,620 KB/s (12x) - WS: 16,620 KB/s (12x)
Descriptor 5...
-> B0: 0x03, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 22,160 KB/s (16x) - WS: 22,160 KB/s (16x)
Descriptor 6...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295104 (0x00230540)
-> RS: 22,160 KB/s (16x) - WS: 24,930 KB/s (18x)

Link to comment
Share on other sites

I just sends that command to the drive. Either it successfully processes it (and you think nothing happens) or it fails and you see the I/O error box.

But then when I send the close session I get the box that says what I posted before.

Because I don't hear the drive spinning at all.

Link to comment
Share on other sites

Isn't there an option in the DVD recorder to finalize the disc? I know that such a feature exists in DVD camcorders. Look in the manual.

Well I have lost the remote control :(

 

I found the solution. Using nero it works fine but I wanted to use imgburn

Link to comment
Share on other sites

Did you have to burn more as a multisession disc to then close it?

Not sure. The disk were full no space for much burning. With nero has a little button that said close DVD-vr

 

It didn't create more sessions. Or add more data

Edited by dirio49
Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.