Jump to content
Sign in to follow this  
ccarcii

Can't burn to disk, error message help!

Recommended Posts

I have been trying to burn an iso file to my blue-ray disk drive and this is the error that I get.

 

I/O Error!

 

Device: [0:0:0] MATSHITA BD-MLT UJ260 1.00 (D:) (SATA)

 

ScsiStatus: 0x02

Interpretation: Check Condition

 

CDB: 2A 00 00 00 02 A0 00 00 20 00

Interpretation: Write (10) - Sectors: 672-703

 

Sense Area: F1 00 03 00 00 00 00 0A 00 23 1C 21 73 03 00 00 00 00

SK Interpretation: Medium Error

ASC/ASCQ Interpretation: Power Calibration Area Error

 

 

Share this post


Link to post
Share on other sites

Here is the full log 

 

I 01:56:04 Operation Started!
I 01:56:04 Source File: C:\Users\wjz199\Desktop\PX-128M5M_1.05.iso
I 01:56:04 Source File Sectors: 1,647 (MODE1/2048)
I 01:56:04 Source File Size: 3,373,056 bytes
I 01:56:04 Source File Volume Identifier: SSD FLASH_
I 01:56:04 Source File Application Identifier: "SSD Utility"_
I 01:56:04 Source File File System(s): ISO9660 (Bootable), Joliet
I 01:56:04 Destination Device: [0:0:0] MATSHITA BD-MLT UJ260 1.00 (D:) (SATA)
I 01:56:04 Destination Media Type: DVD-R (Disc ID: MBI 01RG40)
I 01:56:04 Destination Media Supported Write Speeds: 2x, 8x
I 01:56:04 Destination Media Sectors: 2,298,496
I 01:56:04 Write Mode: DVD
I 01:56:04 Write Type: DAO
I 01:56:04 Write Speed: MAX
I 01:56:04 Link Size: Auto
I 01:56:04 Lock Volume: Yes
I 01:56:04 Test Mode: No
I 01:56:04 OPC: No
I 01:56:04 BURN-Proof: Enabled
I 01:56:04 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)
I 01:56:04 Filling Buffer... (80 MiB)
I 01:56:05 Writing LeadIn...
W 01:56:28 Failed to Write Sectors 672 - 703 - Reason: Power Calibration Area Error
W 01:56:28 Retrying (1 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (2 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (3 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (4 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (5 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (6 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (7 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (8 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (9 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (10 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (11 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (12 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (13 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (14 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (15 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (16 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (17 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (18 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (19 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
W 01:56:28 Retrying (20 of 20)...
W 01:56:28 Retry Failed - Reason: Power Calibration Area Error
E 01:56:30 Failed to Write Sectors 672 - 703 - Reason: Power Calibration Area Error
I 01:56:30 Synchronising Cache...
E 01:56:32 Failed to Write Image!
E 01:56:32 Operation Failed! - Duration: 00:00:27
I 01:56:32 Average Write Rate: 0 KiB/s (0.0x) - Maximum Write Rate: 0 KiB/s (0.0x)

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.