Jump to content
JRU

I receive verify failed layouts do not match error

Recommended Posts

Hi, I tried to copy iso file to a cdrw. While i could see that it finishes the task of writing, on verifying i get the above error message.

                    I could use the dvd wr to see the video and it is perfectly working without any hitch. Why i am getting this error in xp. I have used the latest 2.5.8 version of imgburn.

 The burn would be success but on verify is failing . Why? i know that the dvd drive support both dvd and cd write.

Share this post


Link to post
Share on other sites

; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Sunday, 13 March 2016, 12:32:56
; \\****************************************//
;
;
I 12:30:53 ImgBurn Version 2.5.8.0 started!
I 12:30:53 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 12:30:53 Total Physical Memory: 1,039,596 KiB  -  Available: 212,820 KiB
I 12:30:53 Initialising SPTI...
I 12:30:53 Searching for SCSI / ATAPI devices...
I 12:30:54 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 12:30:54 Found 1 DVD±RW/RAM!
I 12:31:38 Operation Started!
I 12:31:38 Source File: C:\Documents and Settings\ITBLOCK\My Documents\Downloads\SeaToolsDOS220EURO.144.ISO
I 12:31:38 Source File Sectors: 1,532 (MODE1/2048)
I 12:31:38 Source File Size: 3,137,536 bytes
I 12:31:38 Source File Volume Identifier: SEAGATE
I 12:31:38 Source File File System(s): ISO9660 (Bootable), Joliet
I 12:31:38 Destination Device: [1:0:0] Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 12:31:38 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India)
I 12:31:38 Destination Media Supported Write Speeds: 10x, 16x, 20x, 24x
I 12:31:38 Destination Media Sectors: 359,847
I 12:31:38 Write Mode: CD
I 12:31:38 Write Type: SAO
I 12:31:38 Write Speed: MAX
I 12:31:38 Lock Volume: Yes
I 12:31:38 Test Mode: No
I 12:31:38 OPC: No
I 12:31:38 BURN-Proof: Enabled
W 12:31:40 Write Speed Miscompare! - MODE SENSE: 4,234 KB/s (24x), GET PERFORMANCE: 11,080 KB/s (63x)
I 12:31:40 Write Speed Successfully Set! - Effective: 4,234 KB/s (24x)
I 12:31:40 Filling Buffer... (40 MiB)
I 12:31:41 Writing LeadIn...
I 12:32:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 1531)
I 12:32:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1531)
I 12:32:03 Synchronising Cache...
I 12:32:18 Exporting Graph Data...
I 12:32:18 Graph Data File: C:\Documents and Settings\ITBLOCK\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EX31_SUNDAY-MARCH-13-2016_12-31_PM_97m17s06f_MAX.ibg
I 12:32:18 Export Successfully Completed!
I 12:32:18 Operation Successfully Completed! - Duration: 00:00:39
I 12:32:18 Average Write Rate: N/A - Maximum Write Rate: N/A
I 12:32:18 Cycling Tray before Verify...
W 12:32:41 Waiting for device to become ready...
I 12:32:45 Device Ready!
E 12:32:45 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 12:32:45 Verify Failed! - Reason: Layouts do not match.
I 12:32:56 Close Request Acknowledged
I 12:32:56 Closing Down...
I 12:32:56 Shutting down SPTI...
I 12:32:56 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Saturday, 12 March 2016, 18:30:41
; \\****************************************//
;
;
I 18:27:57 ImgBurn Version 2.5.8.0 started!
I 18:27:57 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 18:27:57 Total Physical Memory: 1,039,596 KiB  -  Available: 522,552 KiB
I 18:27:57 Initialising SPTI...
I 18:27:57 Searching for SCSI / ATAPI devices...
I 18:27:58 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 18:27:58 Found 1 DVD±RW/RAM!
I 18:28:28 Operation Started!
I 18:28:28 Source File: C:\Documents and Settings\ITBLOCK\My Documents\Downloads\SeaToolsDOS220EURO.144.ISO
I 18:28:28 Source File Sectors: 1,532 (MODE1/2048)
I 18:28:28 Source File Size: 3,137,536 bytes
I 18:28:28 Source File Volume Identifier: SEAGATE
I 18:28:28 Source File File System(s): ISO9660 (Bootable), Joliet
I 18:28:28 Destination Device: [1:0:0] Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 18:28:28 Destination Media Type: CD-RW (Disc ID: 97m10s00f, Ritek Co.)
I 18:28:28 Destination Media Supported Write Speeds: 4x
I 18:28:28 Destination Media Sectors: 359,847
I 18:28:28 Write Mode: CD
I 18:28:28 Write Type: SAO
I 18:28:28 Write Speed: MAX
I 18:28:28 Lock Volume: Yes
I 18:28:28 Test Mode: No
I 18:28:28 OPC: No
I 18:28:28 BURN-Proof: Enabled
W 18:28:31 Write Speed Miscompare! - MODE SENSE: 706 KB/s (4x), GET PERFORMANCE: 11,080 KB/s (63x)
I 18:28:31 Write Speed Successfully Set! - Effective: 706 KB/s (4x)
I 18:28:31 Filling Buffer... (40 MiB)
I 18:28:32 Writing LeadIn...
I 18:29:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 1531)
I 18:29:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1531)
I 18:29:21 Synchronising Cache...
I 18:30:04 Exporting Graph Data...
I 18:30:04 Graph Data File: C:\Documents and Settings\ITBLOCK\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EX31_SATURDAY-MARCH-12-2016_6-28_PM_97m10s00f_MAX.ibg
I 18:30:04 Export Successfully Completed!
I 18:30:04 Operation Successfully Completed! - Duration: 00:01:36
I 18:30:04 Average Write Rate: 1,532 KiB/s (8.9x) - Maximum Write Rate: 1,532 KiB/s (8.9x)
I 18:30:04 Cycling Tray before Verify...
W 18:30:21 Waiting for device to become ready...
I 18:30:25 Device Ready!
E 18:30:25 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 18:30:25 Verify Failed! - Reason: Layouts do not match.
I 18:30:40 Close Request Acknowledged
I 18:30:40 Closing Down...
I 18:30:40 Shutting down SPTI...
I 18:30:41 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Saturday, 12 March 2016, 17:56:55
; \\****************************************//
;
;
I 17:49:30 ImgBurn Version 2.5.8.0 started!
I 17:49:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 17:49:30 Total Physical Memory: 1,039,596 KiB  -  Available: 301,436 KiB
I 17:49:30 Initialising SPTI...
I 17:49:30 Searching for SCSI / ATAPI devices...
I 17:49:31 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 17:49:31 Found 1 DVD±RW/RAM!
I 17:56:54 Close Request Acknowledged
I 17:56:54 Closing Down...
I 17:56:55 Shutting down SPTI...
I 17:56:55 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Saturday, 12 March 2016, 17:40:30
; \\****************************************//
;
;
I 17:37:26 ImgBurn Version 2.5.8.0 started!
I 17:37:26 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 17:37:26 Total Physical Memory: 1,039,596 KiB  -  Available: 344,804 KiB
I 17:37:26 Initialising SPTI...
I 17:37:26 Searching for SCSI / ATAPI devices...
I 17:37:27 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 17:37:27 Found 1 DVD±RW/RAM!
I 17:37:52 Operation Started!
I 17:37:52 Source File: C:\Documents and Settings\ITBLOCK\My Documents\Downloads\SeaToolsDOS220EURO.144.ISO
I 17:37:52 Source File Sectors: 1,532 (MODE1/2048)
I 17:37:52 Source File Size: 3,137,536 bytes
I 17:37:52 Source File Volume Identifier: SEAGATE
I 17:37:52 Source File File System(s): ISO9660 (Bootable), Joliet
I 17:37:52 Destination Device: [1:0:0] Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 17:37:52 Destination Media Type: CD-RW (Disc ID: 97m10s00f, Ritek Co.)
I 17:37:52 Destination Media Supported Write Speeds: 4x
I 17:37:52 Destination Media Sectors: 359,847
I 17:37:52 Write Mode: CD
I 17:37:52 Write Type: SAO
I 17:37:52 Write Speed: MAX
I 17:37:52 Lock Volume: Yes
I 17:37:52 Test Mode: No
I 17:37:52 OPC: No
I 17:37:52 BURN-Proof: Enabled
W 17:37:56 Write Speed Miscompare! - MODE SENSE: 706 KB/s (4x), GET PERFORMANCE: 11,080 KB/s (63x)
I 17:37:56 Write Speed Successfully Set! - Effective: 706 KB/s (4x)
I 17:37:56 Filling Buffer... (40 MiB)
I 17:37:56 Writing LeadIn...
I 17:38:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 1531)
I 17:38:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1531)
I 17:38:45 Synchronising Cache...
I 17:39:28 Exporting Graph Data...
I 17:39:28 Graph Data File: C:\Documents and Settings\ITBLOCK\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EX31_SATURDAY-MARCH-12-2016_5-37_PM_97m10s00f_MAX.ibg
I 17:39:28 Export Successfully Completed!
I 17:39:28 Operation Successfully Completed! - Duration: 00:01:35
I 17:39:28 Average Write Rate: 1,532 KiB/s (8.9x) - Maximum Write Rate: 1,532 KiB/s (8.9x)
I 17:39:28 Cycling Tray before Verify...
W 17:39:43 Waiting for device to become ready...
I 17:39:48 Device Ready!
E 17:39:48 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 17:39:48 Verify Failed! - Reason: Layouts do not match.
I 17:40:29 Close Request Acknowledged
I 17:40:29 Closing Down...
I 17:40:30 Shutting down SPTI...
I 17:40:30 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Saturday, 12 March 2016, 17:31:41
; \\****************************************//
;
;
I 17:28:11 ImgBurn Version 2.5.8.0 started!
I 17:28:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 17:28:11 Total Physical Memory: 1,039,596 KiB  -  Available: 350,128 KiB
I 17:28:11 Initialising SPTI...
I 17:28:11 Searching for SCSI / ATAPI devices...
I 17:28:12 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 17:28:12 Found 1 DVD±RW/RAM!
I 17:29:07 Operation Started!
I 17:29:07 Source File: C:\Documents and Settings\ITBLOCK\My Documents\Downloads\SeaToolsDOS223ALL(1).ISO
I 17:29:07 Source File Sectors: 4,330 (MODE1/2048)
I 17:29:07 Source File Size: 8,867,840 bytes
I 17:29:07 Source File Volume Identifier: SEAGATE
I 17:29:07 Source File Application Identifier: SeaTools for DOS
I 17:29:07 Source File File System(s): ISO9660 (Bootable), Joliet
I 17:29:07 Destination Device: [1:0:0] Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 17:29:07 Destination Media Type: CD-RW (Disc ID: 97m10s00f, Ritek Co.)
I 17:29:07 Destination Media Supported Write Speeds: 4x
I 17:29:07 Destination Media Sectors: 359,847
I 17:29:07 Write Mode: CD
I 17:29:07 Write Type: SAO
I 17:29:07 Write Speed: MAX
I 17:29:07 Lock Volume: Yes
I 17:29:07 Test Mode: No
I 17:29:07 OPC: No
I 17:29:07 BURN-Proof: Enabled
W 17:29:10 Write Speed Miscompare! - MODE SENSE: 706 KB/s (4x), GET PERFORMANCE: 11,080 KB/s (63x)
I 17:29:10 Write Speed Successfully Set! - Effective: 706 KB/s (4x)
I 17:29:11 Filling Buffer... (40 MiB)
I 17:29:11 Writing LeadIn...
I 17:29:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 4329)
I 17:29:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4329)
I 17:30:09 Synchronising Cache...
I 17:30:52 Exporting Graph Data...
I 17:30:52 Graph Data File: C:\Documents and Settings\ITBLOCK\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EX31_SATURDAY-MARCH-12-2016_5-29_PM_97m10s00f_MAX.ibg
I 17:30:52 Export Successfully Completed!
I 17:30:52 Operation Successfully Completed! - Duration: 00:01:45
I 17:30:52 Average Write Rate: 787 KiB/s (4.6x) - Maximum Write Rate: 787 KiB/s (4.6x)
I 17:30:52 Cycling Tray before Verify...
W 17:31:20 Waiting for device to become ready...
I 17:31:23 Device Ready!
E 17:31:23 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 17:31:23 Verify Failed! - Reason: Layouts do not match.
I 17:31:41 Close Request Acknowledged
I 17:31:41 Closing Down...
I 17:31:41 Shutting down SPTI...
I 17:31:41 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Saturday, 12 March 2016, 17:28:04
; \\****************************************//
;
;
I 17:26:47 ImgBurn Version 2.5.8.0 started!
I 17:26:47 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 17:26:47 Total Physical Memory: 1,039,596 KiB  -  Available: 320,944 KiB
I 17:26:47 Initialising SPTI...
I 17:26:47 Searching for SCSI / ATAPI devices...
I 17:26:49 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 17:26:49 Found 1 DVD±RW/RAM!
I 17:28:04 Close Request Acknowledged
I 17:28:04 Closing Down...
I 17:28:04 Shutting down SPTI...
I 17:28:04 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Saturday, 12 March 2016, 17:21:05
; \\****************************************//
;
;
I 15:35:12 ImgBurn Version 2.5.8.0 started!
I 15:35:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 15:35:12 Total Physical Memory: 1,039,596 KiB  -  Available: 186,464 KiB
I 15:35:12 Initialising SPTI...
I 15:35:12 Searching for SCSI / ATAPI devices...
I 15:35:13 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 15:35:13 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown)
I 15:35:13 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 15:36:07 Operation Started!
I 15:36:07 Source File: C:\Documents and Settings\ITBLOCK\My Documents\Downloads\SeaToolsDOS223ALL.ISO
I 15:36:07 Source File Sectors: 4,330 (MODE1/2048)
I 15:36:07 Source File Size: 8,867,840 bytes
I 15:36:07 Source File Volume Identifier: SEAGATE
I 15:36:07 Source File Application Identifier: SeaTools for DOS
I 15:36:07 Source File File System(s): ISO9660 (Bootable), Joliet
I 15:36:07 Destination Device: [1:0:0] Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 15:36:07 Destination Media Type: CD-RW (Disc ID: 97m10s00f, Ritek Co.)
I 15:36:07 Destination Media Supported Write Speeds: 4x
I 15:36:07 Destination Media Sectors: 359,847
I 15:36:07 Write Mode: CD
I 15:36:07 Write Type: SAO
I 15:36:07 Write Speed: 4x
I 15:36:07 Lock Volume: Yes
I 15:36:07 Test Mode: No
I 15:36:07 OPC: No
I 15:36:07 BURN-Proof: Enabled
I 15:36:10 Write Speed Successfully Set! - Effective: 706 KB/s (4x)
I 15:36:11 Filling Buffer... (40 MiB)
I 15:36:11 Writing LeadIn...
I 15:36:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 4329)
I 15:36:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4329)
I 15:37:09 Synchronising Cache...
I 15:37:52 Exporting Graph Data...
I 15:37:52 Graph Data File: C:\Documents and Settings\ITBLOCK\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EX31_SATURDAY-MARCH-12-2016_3-36_PM_97m10s00f_4x.ibg
I 15:37:52 Export Successfully Completed!
I 15:37:52 Operation Successfully Completed! - Duration: 00:01:45
I 15:37:52 Average Write Rate: 787 KiB/s (4.6x) - Maximum Write Rate: 787 KiB/s (4.6x)
W 16:27:06 Device Removal Detected!
I 16:27:07 Searching for SCSI / ATAPI devices...
I 16:27:09 -> Drive 1 - Info: Optiarc DVD RW AD-7530A EX31 (G:) (ATA)
I 16:27:09 Found 1 DVD±RW/RAM!
I 17:21:04 Close Request Acknowledged
 

Share this post


Link to post
Share on other sites

It looks like your drive thinks the disc is still empty once the burn has completed and the tray has been cycled.

 

Maybe try cleaning the drive with a cleaning disc?

Share this post


Link to post
Share on other sites

Hi, I cleaned the drive with writex and still i could not burn. It is repeating the same error.

by the by, is my drive capable of writing to cd and dvd. how to find . Now i checked after cleaning whether it could read. i found it is reading and playing movies from the cd dvds.

                        As an alternative, i tried with nero also, it also shows some error and pointing in the last line some registry key entry. I do not know how to decipher it.

                           I am using your program, in windows 7 which does not have any problem.

                           Moreover, when i checked with mrfixit from msoft, it shows, install cd dvd writer. I do not know what it meant. Please.

immensely pleased with your prompt replies as and when a reply is posted.

Share this post


Link to post
Share on other sites

Please take one of the discs you've just burnt and put it back in the drive.

 

Load ImgBurn and go into Write mode. Copy and paste all of the disc info from the box on the right into your next reply.

Share this post


Link to post
Share on other sites

Optiarc DVD RW AD-7530A EX31 (ATA)
Current Profile: CD-RW

Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: Yes
Free Sectors: 359,847
Free Space: 736,966,656 bytes
Free Time: 79:59:72 (MM:SS:FF)
Next Writable Address: 0
MID: 97m10s00f (Ritek Co.)
Supported Write Speeds: 4x

ATIP Information:
Disc ID: 97m10s00f
Manufacturer: Ritek Co.
Start Time of LeadIn: 97m10s00f
Last Possible Start Time of LeadOut: 79m59s74f

Format Capacities:
DT: 0x01 - NB: 359849 (0x00057DA9) - TDP: 2048
FT: 0x10 - NB: 0 (0x00000000) - TDP: 0
FT: 0x11 - NB: 0 (0x00000000) - TDP: 0
FT: 0x12 - NB: 0 (0x00000000) - TDP: 0

Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359834 (0x00057D9A)
-> RS: 704 KB/s (4x) - WS: 704 KB/s (4x)
 

Share this post


Link to post
Share on other sites

Yeah so that disc still looks empty to me.... and more importantly, the drive.

 

If all of your discs are coming out 'empty' after you've burnt them, you may just need to buy a new drive as clearly yours isn't functioning properly.

Share this post


Link to post
Share on other sites

but it reads the other cds . and playing movie , closing and opening correctly. Is there any registry check to make this work. the same cd in win 7 burns with imgburn.

   what is lay out do not match. which layout . the drive layout

Share this post


Link to post
Share on other sites

It's only reading stuff you've burnt in the past isn't it? If everything you burn now comes out as an empty disc, it clearly can't be reading those and something has gone wrong with the burning functionality of your drive.

 

The layout refers to the disc layout. As the error message indicates, the program has detected a problem with it - namely that there should be 1 session on the disc and there are 0 sessions (because the drive still reports it is empty).

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.