Jump to content
skid_marx

CD-R "Disk not empty"

Recommended Posts

Trying to burn psuedo saturn kai(1,880 KB) onto a 700MB CD-R, Img Burn says "Disk is not empty" despite formatting it multiple times, attempting to use img burn to clear the disk wont work either.

here's the imformation in the box on the right:

HL-DT-ST DVD+-RW GHA2N A103 (SATA)
Current Profile: CD-R

Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 4
Sectors: 21,218
Size: 43,454,464 bytes
Time: 04:44:68 (MM:SS:FF)
Free Sectors: 331,424
Free Space: 678,756,352 bytes
Free Time: 73:40:74 (MM:SS:FF)
Next Writable Address: 28423
MID: 97m27s18f (Plasmon Data Systems)
Supported Write Speeds: 4x, 8x, 16x, 24x, 32x, 40x, 48x

TOC Information:
Session 1... (LBA: 0 / 00:02:00)
-> Track 01  (Mode 2, Form 1, LBA: 0 / 00:02:00)
-> LeadOut  (LBA: 322 / 00:06:22)
Session 2... (LBA: 11722 / 02:38:22)
-> Track 02  (Mode 2, Form 1, LBA: 11722 / 02:38:22)
-> LeadOut  (LBA: 14018 / 03:08:68)
Session 3... (LBA: 20918 / 04:40:68)
-> Track 03  (Mode 2, Form 1, LBA: 20918 / 04:40:68)
-> LeadOut  (LBA: 21218 / 04:44:68)

ATIP Information:
Disc ID: 97m27s18f
Manufacturer: Plasmon Data Systems
Start Time of LeadIn: 97m27s18f
Last Possible Start Time of LeadOut: 79m59s74f

Performance (Write Speed):
Descriptor 1...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 706 KB/s (4x)
Descriptor 2...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 1,411 KB/s (8x)
Descriptor 3...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 2,822 KB/s (16x)
Descriptor 4...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 4,235 KB/s (24x)
Descriptor 5...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 5,646 KB/s (32x)
Descriptor 6...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 7,057 KB/s (40x)
Descriptor 7...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 359848 (0x00057DA8)
-> RS: 8,467 KB/s (48x) - WS: 8,468 KB/s (48x)
 

Share this post


Link to post
Share on other sites

lets say i theoretically already ordered a stack of blank cd-r's from amazon that are already out for delivery, after this old one was a dud. Would i still be able to write to them, even if only once?

Share this post


Link to post
Share on other sites

Yes, unless your drive is broken, you should have no problem writing to them (subject to normal disc quality issues).

Do not attempt to erase or format them before use. Take one out of the packet, fire up ImgBurn and try to burn that image again.

Share this post


Link to post
Share on other sites
1 minute ago, LIGHTNING UK! said:

Yes, unless your drive is broken, you should have no problem writing to them (subject to normal disc quality issues).

Do not attempt to erase or format them before use. Take one out of the packet, fire up ImgBurn and try to burn that image again.

Good to know, thanks!

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.