nsaxiom Posted November 16, 2021 Share Posted November 16, 2021 (edited) Hello, I am burning an audio cd from mp3 files utilizing the write mode using the cue sheet. I add files which take up more space than the CD can hold. I am presented with the option to overburn or truncate just before burning. I choose truncate. However Imgburn seems to overburn anyway. It is my understanding that truncate writes as much as the disc reports it will hold. Before I burn the disc, Imgburn reports the free space as: 736,960,512 bytes. After choosing truncate, the disc ends up with 759,498,752 bytes written to it. I have tested this twice to ensure I was selecting truncate. When I play my CD, at then end of the CD the player errors by continuously seeking (I hear the head continuously seeking). My question is can I select or specify the truncate size to prevent this from happening? ================================ This is the info before burning: Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 359,844 Free Space: 736,960,512 bytes Free Time: 79:59:69 (MM:SS:FF) Next Writable Address: 0 MID: 97m26s66f (CMC Magnetics Corp.) Supported Read Speeds: 10x, 16x, 20x, 24x ATIP Information: Disc ID: 97m26s66f Manufacturer: CMC Magnetics Corp. Start Time of LeadIn: 97m26s66f Last Possible Start Time of LeadOut: 79m59s71f ================================ This is the info after burning: Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 370,849 Size: 759,498,752 bytes Time: 82:26:49 (MM:SS:FF) Supported Read Speeds: 10x, 16x, 20x, 24x TOC Information: Session 1... (LBA: 0 / 00:02:00) -> Track 01 (Audio, 45:49:28, LBA: 0 / 00:02:00) -> Track 02 (Audio, 36:35:21, LBA: 206203 / 45:51:28) -> LeadOut (LBA: 370849 / 82:26:49) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 206201, LRA: 0) -> Track 02 (LTSA: 206203, LTS: 164644, LRA: 0) ATIP Information: Disc ID: 97m26s66f Manufacturer: CMC Magnetics Corp. Start Time of LeadIn: 97m26s66f Last Possible Start Time of LeadOut: 79m59s71f ================================ Log: I 09:49:16 ImgBurn Version 2.5.8.0 started! I 09:49:16 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 09:49:16 Total Physical Memory: 16,595,572 KiB - Available: 7,375,916 KiB I 09:49:17 Initialising SPTI... I 09:49:17 Searching for SCSI / ATAPI devices... I 09:49:17 -> Drive 1 - Info: hp DVDRW GUE1N UE01 (D:) (RAID) I 09:49:17 Found 1 DVD±RW/RAM! W 10:14:23 User accepted disc space warning and is attempting to truncate! I 10:14:23 Operation Started! I 10:14:23 Source File: C:\Users\Owner\Music\4 and 1 .2.cue I 10:14:23 Source File Sectors: 370,849 (AUDIO/2352) I 10:14:23 Source File Size: 872,236,848 bytes I 10:14:23 Source File File System(s): None I 10:14:23 Destination Device: [1:1:0] hp DVDRW GUE1N UE01 (D:) (RAID) I 10:14:23 Destination Media Type: CD-R (Disc ID: 97m26s66f, CMC Magnetics Corp.) I 10:14:23 Destination Media Supported Write Speeds: 10x, 16x, 24x I 10:14:23 Destination Media Sectors: 359,844 I 10:14:23 Write Mode: CD I 10:14:23 Write Type: SAO I 10:14:23 Write Speed: MAX I 10:14:23 Lock Volume: Yes I 10:14:23 Test Mode: No I 10:14:23 OPC: No I 10:14:23 BURN-Proof: Enabled I 10:14:23 Write Speed Successfully Set! - Effective: 4,234 KB/s (24x) I 10:14:23 Filling Buffer... (80 MiB) I 10:14:26 Writing LeadIn... I 10:14:54 Writing Session 1 of 1... (2 Tracks, LBA: 0 - 370848) I 10:14:54 Writing Track 1 of 2... (AUDIO/2352, MP3, LBA: 0 - 206202) I 10:17:55 Writing Track 2 of 2... (AUDIO/2352, MP3, LBA: 206203 - 370848) I 10:19:27 Synchronising Cache... I 10:19:29 Exporting Graph Data... I 10:19:29 Graph Data File: C:\Users\Owner\AppData\Roaming\ImgBurn\Graph Data Files\hp_DVDRW_GUE1N_UE01_TUESDAY-NOVEMBER-16-2021_10-14_AM_97m26s66f_MAX.ibg I 10:19:29 Export Successfully Completed! I 10:19:29 Operation Successfully Completed! - Duration: 00:05:06 I 10:19:29 Average Write Rate: 3,038 KiB/s (15.4x) - Maximum Write Rate: 4,259 KiB/s (21.5x) ================================================ Thank you Edited November 16, 2021 by nsaxiom Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 16, 2021 Share Posted November 16, 2021 That looks like a bug to me. I’ll look into it. Link to comment Share on other sites More sharing options...
ThaCrip Posted March 3 Share Posted March 3 (edited) On 11/16/2021 at 12:41 PM, nsaxiom said: Manufacturer: CMC Magnetics Corp. Time: 82:26:49 (MM:SS:FF) My guess is I won't get a reply from this user given the age of the post. but I am curious as to whats the specific brand those CD-R's? ; because if they are Verbatim I am reasonably confident you can go to at least 82:14:66 (82min15sec) and have a successful overburn and music will play without the clicking issue you experienced at the end of the standard music CD-R as I noticed in the past when I overburn too far on other random CD-R's they react the same, at least in some of my CD players if I recall correctly. but the Verbatim (CMC Magnetics Corp) 80min CD-R I have are easily the furthest I overburned successfully as I would guesstimate on any random brand of CD-R's nowadays you can probably get at least 30sec to maybe a minute or so over the 80min mark, but much beyond that your rolling-the-dice and it could easily fail. so when I got 2min15sec over successfully I was a little surprised since prior to that happening I figured 1min15sec to 1min30sec was pushing it really hard on any random CD-R brand. but if yours is Verbatim brand that probably means I am very close to the failure point (from my best guess without knowing the exact cut off point) as 82:14:66 works but your 82:26:49 fails, which probably means the overburn failure point is somewhere between 2min15sec to 2min26sec over the usual 80min normal limit. it's possible I could try pushing over the 2min15sec limit to maybe 2min20sec at some point in the future but I only burn standard Audio CD's occasionally and getting a CD-R to very close to say 2min20sec over the 80min limit might not always occur as I mainly use overburning so if I go a little over the 80min limit I don't have to remove any songs. who knows, if I did not mind wasting a CD-R I could say try burning 2min30sec over the usual 80min limit (so about 82min30sec), and assuming it fails, I could probably put it into a CD player and watch the time on the last song and see at what seconds left in that song it fails and from there I should be able to get a very close estimate as to the true limit of it by subtracting the time difference of when it failed to where it should have finished and then be slightly conservative from there. so for example... say the song playing failed at the 82min23sec mark (as the CD player starts the clicking and gets out of whack), which if it was 82min30sec that means it would have failed with about 7 seconds to go on the last song before it stopped normally, which that probably means I would have to have it so it's even less than that for the CD-R to close etc from a rough guess so the CD player does not do the clicking issue and will stop like is normally expected in a normally functioning CD-R. p.s. I never tried the truncate option though since in my case ill always either overburn (like if it's a bit past 80min) or make sure it will fit within the usual 80min limit by removing song(s). Edited March 3 by ThaCrip Link to comment Share on other sites More sharing options...
nsaxiom Posted March 3 Author Share Posted March 3 I don't know the brand. They were CD-R's I got from a thrift store with no branding on them, however Imgburn reported the manufacturer as "Manufacturer: CMC Magnetics Corp." They came in a stack of 100 and are white, with no markings whatsoever. Link to comment Share on other sites More sharing options...
ThaCrip Posted March 4 Share Posted March 4 So what I was saying does not really apply to you or you to me since yours are from a random manufacturer as they might only overburn a minute or so over the usual 80min limit, but it's hard to say for sure without testing as we only know you can't do '82:26:49'. because I imagine with the 'CMC Magnetics Corp' how far one can actually overburn will probably vary from manufacturer to manufacturer. so in that case only way I can know the rough cut off point of mine in particular is to waste a CD-R and say try burning 82minute30sec or more just to see if it works or not as if not as when playing I can get a rough idea of where the cut off point is. but thanks for the info as I did not expect to get a reply given the age of this post and you only had one post until now Link to comment Share on other sites More sharing options...
Recommended Posts