Jump to content

DL Layer Break, Burn Speed : Movie Backup


crazyfastdodge
 Share

Recommended Posts

I have ecountered a pause or reading error in the estimated location of the Layer break (50/50) while playing my DVD. This lasts for about 2:00 minutes of the disc play time. (i.e. 1:00.00 - 1:02.00) My disc player reads Error: Trying to read Media. I can fast forward about 2 minutes and it plays no problem. Does any one have any suggestions?

 

I am also burning from an .iso at 10x. Is this a optimum speed or what do you guys suggest?

Link to comment
Share on other sites

I have never seen 10X as a supported write speed . I dont believe its supported by anyones firmware or drives. Posting a log of the burn helps big time and putting the video to quality media is a must thats Verbatim or Taiyo Yuden .Try burning at a supported speed and examine the disc for damage or blotches etc .Logs are stored by IMGburn HELP-->IMGburn logs

Link to comment
Share on other sites

here you go:

 

//****************************************\\

; ImgBurn Version 2.1.0.0 - Log

; Monday, 12 February 2007, 02:03:56

; \\****************************************//

;

;

I 00:28:46 ImgBurn Version 2.1.0.0 started!

I 00:28:46 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

W 00:28:46 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 00:28:46 Initialising SPTI...

I 00:28:46 Searching for SCSI / ATAPI devices...

I 00:28:47 Found 1 CD-RW and 1 DVD?RW/RAM!

I 00:32:05 Operation Started!

I 00:32:05 Building Image Tree...

E 00:32:17 Operation Failed! - Duration: 00:00:11

I 00:32:19 Operation Started!

I 00:32:19 Building Image Tree...

I 00:32:20 Checking Directory Depth...

I 00:32:20 Calculating Totals...

I 00:32:20 Preparing Image...

E 00:32:22 Operation Aborted! - Duration: 00:00:02

I 00:33:02 Operation Started!

I 00:33:02 Building Image Tree...

I 00:33:02 Checking Directory Depth...

I 00:33:02 Calculating Totals...

I 00:33:02 Preparing Image...

I 00:33:23 Using Layer Break LBA: 2010314 -> 2080256 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 2/25, Time: 01:25:41, SPLIP: Yes)

I 00:33:23 Checking Path Length...

I 00:33:23 Image Size: 8,520,728,576 bytes

I 00:33:23 Image Sectors: 4,160,512

I 00:33:23 Operation Successfully Completed! - Duration: 00:00:20

I 00:35:30 Operation Started!

I 00:35:30 Building Image Tree...

I 00:35:31 Checking Directory Depth...

I 00:35:31 Calculating Totals...

I 00:35:31 Preparing Image...

I 00:35:36 Using Layer Break LBA: 2010314 -> 2080256 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 2/25, Time: 01:25:41, SPLIP: Yes -> No)

I 00:35:36 Checking Path Length...

I 00:35:36 Image Size: 8,520,728,576 bytes

I 00:35:36 Image Sectors: 4,160,512

I 00:35:38 Operation Successfully Completed! - Duration: 00:00:07

I 00:35:38 Operation Started!

I 00:35:38 Image Contents: 95 Files, 4 Folders

I 00:35:38 Image Sectors: 4,160,512

I 00:35:38 Image Size: 8,520,728,576 bytes

I 00:35:38 Image Layer Break Position: 2,080,256

I 00:35:38 Image Single Layer Profile: DVD+R/RW (Media Capacity: 2,295,104)

I 00:35:38 Image Double Layer Profile: DVD+R DL (Min L0: 0, Max L0: 2,086,912, Media Capacity: 4,173,824)

I 00:35:38 Image Volume Identifier: DAVINCICODE

I 00:35:38 Image Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER!

I 00:35:38 Image Implementation Identifier: ImgBurn

I 00:35:38 Image File System(s): ISO9660, UDF (1.02)

I 00:35:38 Destination File: F:\Iso Files\DavinciCode.iso

I 00:35:38 Destination Free Space: 91,567,935,488 bytes (89,421,812 KB) (87,325 MB) (85 GB)

I 00:35:38 Destination File System: NTFS

I 00:35:38 File Splitting: Auto

I 00:35:40 Writing Image...

I 01:04:55 Image MD5: 081ec3992d8e07a3c438a1c832322e3d

I 01:04:55 Operation Successfully Completed! - Duration: 00:29:17

I 01:04:55 Average Write Rate: 4,735 KB/s (3.4x) - Maximum Write Rate: 18,095 KB/s (13.1x)

I 01:07:50 Operation Started!

I 01:07:50 Source File: F:\Iso Files\DavinciCode.mds

I 01:07:50 Source File Sectors: 4,160,512 (MODE1/2048)

I 01:07:50 Source File Size: 8,520,728,576 bytes

I 01:07:50 Source File Volume Identifier: DAVINCICODE

I 01:07:50 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER!

I 01:07:50 Source File Implementation Identifier: ImgBurn

I 01:07:50 Source File File System(s): ISO9660, UDF (1.02)

I 01:07:50 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-H42L SL00 (D:) (ATA)

I 01:07:50 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x)

I 01:07:50 Destination Media Sectors: 4,173,824

I 01:07:50 Write Mode: DVD

I 01:07:50 Write Type: DAO

I 01:07:50 Write Speed: 12x

I 01:07:50 Link Size: Auto

I 01:07:50 Test Mode: No

I 01:07:50 BURN-Proof: Enabled

I 01:07:50 Optimal L0 Data Zone Capacity: 2,080,256

I 01:07:50 Optimal L0 Data Zone Method: Copied From Original Disc

I 01:08:26 Filling Buffer...

I 01:08:28 Writing LeadIn...

I 01:08:31 Writing Image...

I 01:08:31 Writing Layer 0... (LBA: 0 - 2080255)

I 01:21:20 Writing Layer 1... (LBA: 2080256 - 4160511)

W 01:27:03 Waiting for buffers to recover...

W 01:27:07 Waiting for hard disk activity to reach threshold level...

I 01:27:09 Writing Image...

I 01:34:20 Synchronising Cache...

I 01:34:21 Closing Track...

I 01:34:24 Finalising Disc...

I 01:35:08 Image MD5: 081ec3992d8e07a3c438a1c832322e3d

I 01:35:08 Operation Successfully Completed! - Duration: 00:27:18

I 01:35:08 Average Write Rate: 5,371 KB/s (3.9x) - Maximum Write Rate: 5,832 KB/s (4.2x)

I 01:35:08 Cycling Tray before Verify...

W 01:35:18 Waiting for device to become ready...

I 01:35:40 Device Ready!

I 01:35:41 Operation Started!

I 01:35:41 Source Device: [0:1:0] HL-DT-ST DVDRAM GSA-H42L SL00 (D:) (ATA)

I 01:35:41 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x)

I 01:35:41 Image File: F:\Iso Files\DavinciCode.mds

I 01:35:41 Image File Sectors: 4,160,512 (MODE1/2048)

I 01:35:41 Image File Size: 8,520,728,576 bytes

I 01:35:41 Image File Volume Identifier: DAVINCICODE

I 01:35:41 Image File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER!

I 01:35:41 Image File Implementation Identifier: ImgBurn

I 01:35:41 Image File File System(s): ISO9660, UDF (1.02)

I 01:35:41 Verifying Sectors...

I 01:40:45 Abort Request Acknowledged

E 01:40:45 Failed to Verify Sectors!

E 01:40:45 Operation Aborted! - Duration: 00:05:04

I 01:40:45 Average Verify Rate: 5,915 KB/s (4.3x) - Maximum Verify Rate: 7,162 KB/s (5.2x)

I 02:03:48 Close Request Acknowledged

I 02:03:55 Closing Down...

I 02:03:55 Shutting down SPTI...

I 02:03:55 ImgBurn closed!

Link to comment
Share on other sites

Even SlySoft admitted AnyDVD interefers with the verify.

 

How can you know you have a good burn if you don't verify.

 

And 12x with shit media (even though it limited itself to about 4x)? Asking for trubble matey. Big trubble. :)

 

Change to Verbs, close AnyDVD, verify, write at 2.4 - you'll be right.

 

Regards

Link to comment
Share on other sites

Thank you guys, I'm going to try and make another pass. I'm actually using SONY DVD+R DL Discs. Are these made by Ritek?

 

I'm going to try again I'll let you know how it goes...

 

 

Then why ask for advice if you're not willing to follow it and return or throw away the crap discs you bought and heed the advice given??????

Link to comment
Share on other sites

Thank you guys, I'm going to try and make another pass. I'm actually using SONY DVD+R DL Discs. Are these made by Ritek?

 

I'm going to try again I'll let you know how it goes...

 

 

Then why ask for advice if you're not willing to follow it and return or throw away the crap discs you bought and heed the advice given??????

 

Spinningwheel, what are you talking about?!

 

Thanks everyone for your help. I succesfully backedup up my DVD with my Sony DL Discs and it's running smoooooth. You guys are the best! I think It was definatly the ANY DVD program. I went ahead and removed it from my computer. I also slowed the burn down to 2.4x. So far my experience with this community had been wonderful and again I appreciate the help!

Edited by crazyfastdodge
Link to comment
Share on other sites

Thank you guys, I'm going to try and make another pass. I'm actually using SONY DVD+R DL Discs. Are these made by Ritek?

 

Sony outsource the manufacturiing of their media to other companies. We can see what the DVDs really are (highlighted below) from your logfile and Ritek are garbage.

 

I 01:07:50 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x)
Link to comment
Share on other sites

Thank you guys, I'm going to try and make another pass. I'm actually using SONY DVD+R DL Discs. Are these made by Ritek?

 

Sony outsource the manufacturiing of their media to other companies. We can see what the DVDs really are (highlighted below) from your logfile and Ritek are garbage.

 

I 01:07:50 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x, 4x)

 

Thats pretty interesting. Well I have bought those Sonys' (Ritek) DVD+R DL Discs just cause they were less in cost. I've used 6 so far and have turned two of those into coasters. :/ I mainly blame that on lack of knowledge for this program. I have since read much more on the forums and it seems that the consensus is Verbatim is the best. I plan on purchasing those from now on out. I also spoke with a few people that said Verbatim is way more durable and scratch resistant than any of it's closest competitors. Thanks for the help.

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.