Jump to content
Sign in to follow this  
alexnestian

Getting error everytime i wanna write a DL Disc

Recommended Posts

This is the 6th disk i`m getting error on and i really don't know what to do to make it work .

In past , i wrote DL disks without problem. All of them were Verbatim.

 

The ones with error are Verbatim too .

 

This is the error i get :

untitledcm8.th.jpg

 

I 14:28:34 ImgBurn Version 2.3.2.0 started!

I 14:28:34 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 14:28:34 Total Physical Memory: 1.047.772 KB - Available: 652.628 KB

I 14:28:34 Initialising SPTI...

I 14:28:34 Searching for SCSI / ATAPI devices...

I 14:28:34 Found 1 DVD±RW/RAM!

I 14:30:47 Operation Started!

I 14:30:47 Source File: D:\Download\Torrents\BioShock-XBOX360-USA-DAGGER\b-dgr\b-dgr.dvd

I 14:30:47 Source File Sectors: 3.697.696 (MODE1/2048)

I 14:30:47 Source File Size: 7.572.881.408 bytes

I 14:30:47 Source File Volume Identifier: XGD2DVD_NTSC

I 14:30:47 Source File Implementation Identifier: Sonic Scenarist 3.1

I 14:30:47 Source File File System(s): ISO9660; UDF (1.02)

I 14:30:47 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H20L 1.00 (G:) (ATA)

I 14:30:47 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x; 6x)

I 14:30:47 Destination Media Sectors: 4.173.824

I 14:30:47 Write Mode: DVD

I 14:30:47 Write Type: DAO

I 14:30:47 Write Speed: 2x

I 14:30:47 Link Size: Auto

I 14:30:47 Test Mode: No

I 14:30:47 BURN-Proof: Enabled

I 14:30:47 Optimal L0 Data Zone Capacity: 1.913.760

I 14:30:47 Optimal L0 Data Zone Method: Copied From Original Disc

I 14:30:47 Filling Buffer... (40 MB)

I 14:30:48 Writing LeadIn...

I 14:31:09 Writing Image... (LBA: 0 - 3697695)

I 14:31:09 Writing Layer 0... (LBA: 0 - 1913759)

W 14:34:04 Failed to Write Sectors 246432 - 246463 - Unknown (Vendor Unique) (0x80, 0x04)

W 14:34:04 Retrying (1 of 20)...

W 14:34:04 Retry Failed - No Seek Complete

W 14:34:04 Retrying (2 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (3 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (4 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (5 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (6 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (7 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (8 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (9 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (10 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (11 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (12 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (13 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (14 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (15 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (16 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (17 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (18 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (19 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:34:04 Retrying (20 of 20)...

W 14:34:04 Retry Failed - Invalid Address For Write

W 14:35:58 Retrying (21)...

W 14:35:58 Retry Failed - Invalid Address For Write

W 14:35:59 Retrying (22)...

W 14:35:59 Retry Failed - Invalid Address For Write

W 14:35:59 Retrying (23)...

W 14:35:59 Retry Failed - Invalid Address For Write

W 14:35:59 Retrying (24)...

W 14:35:59 Retry Failed - Invalid Address For Write

W 14:35:59 Retrying (25)...

W 14:35:59 Retry Failed - Invalid Address For Write

W 14:35:59 Retrying (26)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (27)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (28)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (29)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (30)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (31)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (32)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:00 Retrying (33)...

W 14:36:00 Retry Failed - Invalid Address For Write

W 14:36:01 Retrying (34)...

W 14:36:01 Retry Failed - Invalid Address For Write

W 14:36:01 Retrying (35)...

W 14:36:01 Retry Failed - Invalid Address For Write

W 14:36:01 Retrying (36)...

W 14:36:01 Retry Failed - Invalid Address For Write

W 14:36:01 Retrying (37)...

W 14:36:01 Retry Failed - Invalid Address For Write

W 14:36:01 Retrying (38)...

W 14:36:01 Retry Failed - Invalid Address For Write

W 14:36:01 Retrying (39)...

W 14:36:01 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (40)...

W 14:36:02 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (41)...

W 14:36:02 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (42)...

W 14:36:02 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (43)...

W 14:36:02 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (44)...

W 14:36:02 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (45)...

W 14:36:02 Retry Failed - Invalid Address For Write

W 14:36:02 Retrying (46)...

W 14:36:02 Retry Failed - Invalid Address For Write

E 14:36:04 Failed to Write Sectors 246432 - 246463 - Unknown (Vendor Unique) (0x80, 0x04)

I 14:36:05 Synchronising Cache...

I 14:36:06 Closing Track...

I 14:36:07 Finalising Disc...

E 14:36:08 Failed to Write Image!

E 14:36:08 Operation Failed! - Duration: 00:05:20

I 14:36:08 Average Write Rate: 1.670 KB/s (1.2x) - Maximum Write Rate: 3.360 KB/s (2.4x)

 

 

 

this the log

 

Is the problem hardware/software or the disks are the problem ?

I also reinstalled the windows this morning and tried again but the same result

Edited by alexnestian

Share this post


Link to post
Share on other sites

Yes you will . But that i spend on this disc now the last money i had .

So if it works at least i will stay the weekend home playing Bioshock .

If not ...

 

 

later edit : should i try the test mode ? it won't write anythimg on my disk , no ?

 

later edit 2 : my dvd writter doesn't see the disk in tray now .. after the firmware update .... what's wrong ?

Edited by alexnestian

Share this post


Link to post
Share on other sites

Ignore the test mode. Nothing will work until you reboot. Your drive has to reset itself before you can use it.

Share this post


Link to post
Share on other sites

i rebooted and the results are : i inserted the DL disk .. "medium not present " , i inserted other disks and the windows says that they are empty disk . But in imgburn they apear "disk not empty" .

Share this post


Link to post
Share on other sites

Silly question: Do you have another disk you can toss into the drive? Another brand? A single layer? A re-writable?

Share this post


Link to post
Share on other sites

I just tried to burn a normal CD and it work . Then i inserted another CD with a movie and it didn't read it .

And the imgburn still won't read the DL disk

Share this post


Link to post
Share on other sites

Just to clarify, it's not Imgburn that isn't reading the disk. It's the drive itself. Imgburn only reports the errors - it doesn't create them. Try burning a disk with a different burning program like Nero. If it succeeds, there could be a problem with your SPTI.device as Nero uses custom drivers and not the ones provided with Windows.

Share this post


Link to post
Share on other sites

Yes . Sorry i wasn't clear enough .

I tried with success to burn a CD with Nero .

 

What should i do about the SPTI ?

 

is there any way i could reflash the firmware to it's initial version : 1.00 ?

Edited by alexnestian

Share this post


Link to post
Share on other sites

Don't go backwards with your firmware. Try this instead.

 

1. Download and install the TRIAL version of CloneDVD from here: http://www.clonedvd.net/download.html

 

2. Reboot

 

3. Load Imgburn and open the settings from the Tools menu

 

4. Click on the I/O tab and under "interface" you should have SPTI -Microsoft selected. Change this to ElbyCDIO - Elaborate Bytes

 

5. Close and re-start Imgburn

Share this post


Link to post
Share on other sites

Well, this is roughly where Lightning_UK comes in. He's the only one that can decipher what the drive is complaining about. He'll be along soon.

 

 

 

 

 

Lightning_UK! A problem for you.

Share this post


Link to post
Share on other sites

reflash the drive with 102 again

 

Take out any discs and make sure tray is closed before flashing

 

once flashed restart your computer.

 

If the same remove the controller from device manage and let windows pick up hardware again.

 

If you have packet writing software installed remove it like neros InCd

 

use the nero cleaner to remove it fully

 

http://www.nero.com/nero6/eng/InCD_Clean_Tool.html

 

you might have to look for the right version cleaning tool if your using incd

Share this post


Link to post
Share on other sites

If the drive is saying there's no media in the tray, I don't see how *any* program could magically work - all the commands used to access the media should fail.

 

I'd flash it again if I were you - and make sure there's not a disc in the drive when you do so.

Share this post


Link to post
Share on other sites

I already flashed it again . While there weren't any disks inside

 

i flashed to 1.01 and now the drive read the blank disk

i will try to burn now .

 

 

last time i got error at 6% . Now it is at 3% ... please god .. make it work

 

 

yet again i got error at 6% ... so it is the 7th disk is destroy ...

 

maybe is the writter ?

Edited by alexnestian

Share this post


Link to post
Share on other sites
No worries. We'll still be here. :)

hi shamus, i'm sorry to bother you but iv been reading alot of your posts and found them to be very very helpful and my reason for asking you this question is that YOU are the master. could u pleasesteer me in the direction of a safe file sharing program??? i already hav lime wire but i'm trying to locate 2 australian movies and cannot seem to be able to find either 1, please help me out. first time poster but long time reader

Share this post


Link to post
Share on other sites
could u pleasesteer me in the direction of a safe file sharing program??? i already hav lime wire but i'm trying to locate 2 australian movies and cannot seem to be able to find either 1, please help me out. first time poster but long time reader

 

This forum and all members will discuss *legal* topics only. The words "file sharing" and "movies" when used in conjunction do not fit into this category. Sorry.

Share this post


Link to post
Share on other sites
could u pleasesteer me in the direction of a safe file sharing program??? i already hav lime wire but i'm trying to locate 2 australian movies and cannot seem to be able to find either 1, please help me out. first time poster but long time reader

 

This forum and all members will discuss *legal* topics only. The words "file sharing" and "movies" when used in conjunction do not fit into this category. Sorry.

sorry, as u can tel I'm extremely new to all of this but i really do want to understand alot better. is file sharing, such as lime wire, legal?

Share this post


Link to post
Share on other sites

File sharing copyrighted content such as music, movies and tv shows is generally illegal. It depends alot on what country you're in. There are some legal uses for file sharing such as downloading Linux distributions, for example. There are also a few recording artists that allow their music to be downloaded legally but they are pretty rare. As a general rule though, file sharing is illegal.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.