Jump to content
Sign in to follow this  
Keras

Xbox360 and DL verb stops at 50 % ?

Recommended Posts

Hi my nec burner have allready burned alot of xbox360 games, but now it makes alot of coasters. Just stopping at 50 or 51 % ( I think it is in the phase of switching between layers ). Last time i got a failure, I just rebooted the pc and then it could burn two games without a failure, and then iI came to this one.

Here is the following log.

 

 

I 21:43:07 ImgBurn Version 2.3.2.0 started!

I 21:43:07 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 21:43:07 Total Physical Memory: 1.047.920 KB - Available: 500.940 KB

I 21:43:07 Initialising SPTI...

I 21:43:07 Searching for SCSI / ATAPI devices...

I 21:43:08 Found 1 DVD±RW!

I 21:43:12 Operation Started!

I 21:43:12 Source File: C:\Documents and Settings\thpg.dvd

I 21:43:12 Source File Sectors: 3.697.696 (MODE1/2048)

I 21:43:12 Source File Size: 7.572.881.408 bytes

I 21:43:12 Source File Volume Identifier: XGD2DVD_NTSC

I 21:43:12 Source File Implementation Identifier: Sonic Scenarist 3.1

I 21:43:12 Source File File System(s): ISO9660; UDF (1.02)

I 21:43:12 Destination Device: [1:0:0] _NEC DVD+-RW ND-6500A 2.40 (D:) (ATA)

I 21:43:12 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x)

I 21:43:12 Destination Media Sectors: 4.173.824

I 21:43:12 Write Mode: DVD

I 21:43:12 Write Type: DAO

I 21:43:12 Write Speed: 2,4x

I 21:43:12 Link Size: Auto

I 21:43:12 Test Mode: No

I 21:43:12 BURN-Proof: Enabled

I 21:43:12 User Specified L0 Data Zone Capacity: 1.913.760

I 21:43:12 Filling Buffer... (40 MB)

I 21:43:14 Writing LeadIn...

W 21:43:36 Failed to Write Sectors 0 - 31 - Power Calibration Area Error

W 21:43:36 Retrying (1 of 20)...

W 21:43:58 Retry Failed - Power Calibration Area Error

W 21:43:58 Retrying (2 of 20)...

I 21:44:22 Writing LeadIn...

I 21:44:24 Writing Image... (LBA: 0 - 3697695)

I 21:44:24 Writing Layer 0... (LBA: 0 - 1913759)

W 22:03:14 Failed to Write Sectors 1873344 - 1873375 - Write Error

W 22:03:14 Retrying (1 of 20)...

W 22:03:14 Retry Failed - Write Error

W 22:03:14 Retrying (2 of 20)...

W 22:03:14 Retry Failed - Write Error

W 22:03:14 Retrying (3 of 20)...

And so on until 20

W 22:16:03 Retry Failed - Write Error

E 22:16:04 Failed to Write Sectors 1873344 - 1873375 - Write Error

I 22:16:04 Synchronising Cache...

I 22:16:05 Closing Track...

E 22:16:11 Close Track Failed! - Reason: Write Error

I 22:16:11 Closing Track (Last Attempt!)...

E 22:16:11 Close Track Failed! - Reason: Write Error

I 22:16:11 Finalising Disc...

E 22:16:15 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

I 22:16:15 Finalising Disc (Last Attempt!)...

E 22:16:15 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

E 22:16:15 Failed to Write Image!

E 22:16:15 Operation Failed! - Duration: 00:33:03

I 22:16:15 Average Write Rate: 1.971 KB/s (1.4x) - Maximum Write Rate: 4.014 KB/s (2.9x)

 

Thanks

Edit : pics and data file

post-9307-1195681073_thumb.png

verb_dl_data.ibg

Edited by Keras

Share this post


Link to post
Share on other sites

Unless I am reading it wrong 2.40 which is what your drives firmware is would appear to be older than 2.24 available at rpc1.org and stock 2.40 cannot set booktype to dvd-rom which you should need to be able to burn successful backups.

 

search google on liggy and dee for an alternative firmware for your drive

Share this post


Link to post
Share on other sites

Have you started on a new spindle of discs recently?

 

Assuming this isn't a 1 off error (i.e. you've burnt more than 1 disc and they've all failed like this), maybe you have a dodgy batch of discs?

 

It's that or your burner has given up the ghost - laptop ones normally are quite rubbish.

Share this post


Link to post
Share on other sites

updating your firmware is always a good idea, new FW handles the latest discs ,dyes ,fixes bugs and so forth. You can update your FW through IMGburn , right click on your burner in the Destination box and from the menu select the last line "check for firmware updates " click on that and take note of the version of your FW(2.40) click OK and you'll be taken to RPC1 site where you'll find the latest NEC official FW download it and flash your drive .Make sure theres no disc in the drive when you do.Liggy and Dee do some great FW's for NEC but I prefer originals when available . If you're unsure how to flash come back and we'll walk you through

Share this post


Link to post
Share on other sites
updating your firmware is always a good idea, new FW handles the latest discs ,dyes ,fixes bugs and so forth. You can update your FW through IMGburn , right click on your burner in the Destination box and from the menu select the last line "check for firmware updates " click on that and take note of the version of your FW(2.40) click OK and you'll be taken to RPC1 site where you'll find the latest NEC official FW download it and flash your drive .Make sure theres no disc in the drive when you do.Liggy and Dee do some great FW's for NEC but I prefer originals when available . If you're unsure how to flash come back and we'll walk you through

That I tried. The last update on my nec drive was in Sun Aug 29, 2004 2:02 am . It s version 2.25, do that won´t work?.

http://forum.rpc1.org/dl_result.php?kaj=1&...VD+-RW+ND-6500A

Share this post


Link to post
Share on other sites
you should also take extra care and look at Fujitsu-Siemens site for updates to drive.

 

Just got off the phone with helpdisk, they can´t get any drivers at their homepage too. I tried everything, on the national and the international homepage of Fujitsu-Siemens.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.