Jump to content
Sign in to follow this  
Lou

Write I/O error after upgrade to 2.4.1.0

Recommended Posts

Yesterday I was using 2.4.0 and DVD-R DL media and it burned fine. I upgrade to 2.4.1 and now the same media from the same spindle now fails. I've made 2 coasters so far. Please help. I love the program and don't want to find a new one. Here is the latest log:

 

I 15:41:37 ImgBurn Version 2.4.1.0 started!

I 15:41:37 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 15:41:37 Total Physical Memory: 3,143,944 KB - Available: 2,367,904 KB

I 15:41:37 Initialising SPTI...

I 15:41:37 Searching for SCSI / ATAPI devices...

I 15:41:37 Found 1 DVD-ROM and 1 DVD

Share this post


Link to post
Share on other sites
I 15:42:55 Destination Media Type: DVD-R DL (Disc ID: RITEKP01) (Speeds: 4x)

First, change to Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore.

 

Second, ensure you don't use -R DL if you are making a DVD Video (which I know is not the case here).

 

Regards

Share this post


Link to post
Share on other sites

It has nothing to do with the software and everything to do with the burner/media/firmware.

 

Regards

Share this post


Link to post
Share on other sites
W 15:59:12 Failed to Write Sectors 1993824 - 1993855 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)

 

That's a machine configuration error and has nothing to do with the application.

 

ImgBurn only reports what the drive tells it, the errors are not from the program itself.

Share this post


Link to post
Share on other sites
W 15:59:12 Failed to Write Sectors 1993824 - 1993855 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32)

 

That's a machine configuration error and has nothing to do with the application.

 

ImgBurn only reports what the drive tells it, the errors are not from the program itself.

 

I appreciate the input but what I don't understand is that if it worked with 2.4.0 why won't it work with 2.4.1. I'll try different media and report my findings. I checked the DMA settings and they seem fine. I just have not made any changes and this is a new SATA drive. I don't get it! And anyone know where I can download 2.4.0?? Thanks again for all your help!

Lou

Share this post


Link to post
Share on other sites

Please just trust me, it's not ImgBurn.

 

You can't 'check' DMA settings, you need to do as the post in the FAQ says and uninstall the controller + reboot.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.