Jump to content
Sign in to follow this  
mbiesheuvel

Burning dvd-r doesnt work

Recommended Posts

Hello all,

 

First i want to say Imgburn is the best thing i have ever used. But now i have a problem... It's not only with Imgburn but with ALL burning programs (Nero, Alcohol etc).

 

I have Windows Vista Ultimate 32 bit. And 2 Asus DRW-2014L1T (Firmware 1.02) drives. I just bought them and tested them with XP. All worked. Now I installed Vista and i have a problem with burning DVD-R media. I use Verbatim media. Burning DVD+R works fine but when I burn DVD-R I get the next error at 97%:

 

; //****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; zondag, 12 oktober 2008, 13:49:50

; \\****************************************//

;

;

I 13:02:52 ImgBurn Version 2.4.2.0 started!

I 13:02:52 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 13:02:52 Total Physical Memory: 3.143.428 KB - Available: 2.066.524 KB

I 13:02:52 Initialising SPTI...

I 13:02:52 Searching for SCSI / ATAPI devices...

I 13:02:52 Found 1 DVD-ROM, 2 DVD

Edited by mbiesheuvel

Share this post


Link to post
Share on other sites

13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Toegang geweigerd

 

what is the reason in english?

check your filter drivers, tools-> filter driver load order

Share this post


Link to post
Share on other sites

Speed the burn up a bit.

 

You might find your drive is better geared towards burning that media at higher speeds than lower ones.

Share this post


Link to post
Share on other sites
13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Toegang geweigerd

 

what is the reason in english?

check your filter drivers, tools-> filter driver load order

 

13:03:28 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access Denied

 

But thats not the problem. Cause also when that error wasnt there it went failed

 

Check the attachment for it.

 

Speed the burn up a bit.

 

You might find your drive is better geared towards burning that media at higher speeds than lower ones.

 

I already did that too... Didn't help :(.

post-14631-1223961326_thumb.jpg

Edited by mbiesheuvel

Share this post


Link to post
Share on other sites

Destination Device: [3:0:0] ASUS DRW-2014L1T 1.02 (I:) (Fibre)

 

fibre??

what is it set up as in bios?

Share this post


Link to post
Share on other sites

Where are your Verbatim blanks made? Singapore? India? Elsewhere? Anyway, if the drive can't burn them at 8x or 12x I'd make a high tech "optical paperweight" (doorstop is another option) with it ;)

Share this post


Link to post
Share on other sites
Destination Device: [3:0:0] ASUS DRW-2014L1T 1.02 (I:) (Fibre)

 

fibre??

what is it set up as in bios?

 

What does fibre mean?? I just reinstalled my pc with xp and guess what... It wont burn in there either now :s. I am totaly confused about it... Mbe those verbatims are not so good as I thought.. Or I just have bought the most crappiest dvd burners there are....

 

How can I see where those verbatims are made then?

Share this post


Link to post
Share on other sites

Fibre is just another form of drive connectivity.

 

It's used by enterprise hard disks and certainly not something an optical drive should be reporting is in use.... and that's down to your drivers.

 

Unless you have an Intel chipset motherboard, don't install any board/controller drivers from the manufacturer.

 

A basic install of XP SP3 should work just fine.

Share this post


Link to post
Share on other sites
Fibre is just another form of drive connectivity.

 

It's used by enterprise hard disks and certainly not something an optical drive should be reporting is in use.... and that's down to your drivers.

 

Unless you have an Intel chipset motherboard, don't install any board/controller drivers from the manufacturer.

 

A basic install of XP SP3 should work just fine.

 

Well I didnt install anything. I just use Vista Ultimate SP1 and put those drives in. Used the default drivers that came with Vista too... So what did I do wrong??? And how can I change it back to the good thing?

Share this post


Link to post
Share on other sites

Nope, it's not how any are seen!

 

They're either ATA, SATA, SCSI or RAID.

 

Fiber is when your drivers are screwed.

Share this post


Link to post
Share on other sites

New log and error....

 

I 21:49:37 ImgBurn Version 2.4.2.0 started!

I 21:49:37 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 21:49:37 Total Physical Memory: 3.143.428 KB - Available: 1.814.716 KB

I 21:49:37 Initialising SPTI...

I 21:49:37 Searching for SCSI / ATAPI devices...

I 21:49:37 Found 2 DVD

post-14631-1224189400_thumb.jpg

Share this post


Link to post
Share on other sites

And this is when I burn a Maxell DVD+R with the same DVD-Burner...

 

I 22:35:22 ImgBurn Version 2.4.2.0 started!

I 22:35:22 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 22:35:22 Total Physical Memory: 3.143.428 KB - Available: 1.815.872 KB

I 22:35:22 Initialising SPTI...

I 22:35:22 Searching for SCSI / ATAPI devices...

I 22:35:22 Found 2 DVD

Share this post


Link to post
Share on other sites

By the way:

 

I checked my Verbatims on the web. I have those:

 

Media color and text:

Silver Verbatim DVD Recordable 4.7 GB 120 Min 16X Certified

 

So it are real Verbatims... There should not be any problem burning those :(.

Share this post


Link to post
Share on other sites

I 23:14:02 ImgBurn Version 2.4.2.0 started!

I 23:14:02 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 23:14:02 Total Physical Memory: 3.143.428 KB - Available: 1.792.200 KB

I 23:14:02 Initialising SPTI...

I 23:14:02 Searching for SCSI / ATAPI devices...

I 23:14:22 Found 2 DVD

Share this post


Link to post
Share on other sites

Ok and 12x, 16x and 20x?

 

I can't believe ASUS would release a drive with firmware so bad that it won't even write to Verbatims!

 

That said, I don't like their DVD-R that much anyway. I'd always take Verbatim DVD+R over their DVD-R any day.

Share this post


Link to post
Share on other sites
That said, I don't like their DVD-R that much anyway. I'd always take Verbatim DVD+R over their DVD-R any day

 

Ditto, I haven't bought a -R in years.

Share this post


Link to post
Share on other sites

I already tried the maximum speed with nero but i will try it with imgburn too tonight when i am at home.

 

And i need those -r for my nintendo wii... its better to use -r for it because +r wont work with the newest games.

Share this post


Link to post
Share on other sites

That is close enough...he suggested the 8X version, which may be slightly better but you should do good with the 16X Yudens.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.