Jump to content
Sign in to follow this  
hxall

Vista x64 - ImgBurn 2.4.2.0 stuck on synchronising cache

Recommended Posts

Alright, I'm new to this forum, although I have been using ImgBurn for about a year on my current PC with WinXP without any problems. I have just upgraded to Vista x64 Ultimate and upgraded ImgBurn to 2.4.2.0, when I try to burn an iso image to my DVD burner it gets stuck on synchronising cache. I have checked the FAQ's and searched this forum but haven't seen anything posted on this matter. A google search indicates others having similar problems with different drives & Vista 64. Only way to recover is to cancel the operation and use task manager to kill ImgBurn, then restart. The disc shows that it has not been finalized.

 

The ImgBurn logs are pasted below. Again all worked fine with this setup (and same media) before Vista x64 upgrade. Any help would be appreciated...

 

I 14:18:02 Destination Device: [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 14:18:02 Destination Media Type: DVD+R (Disc ID: SONY-D11-00) (Speeds: 4x, 8x)

I 14:18:02 Destination Media Sectors: 2,295,104

I 14:18:02 Write Mode: DVD

I 14:18:02 Write Type: DAO

I 14:18:02 Write Speed: MAX

I 14:18:02 DVD+R Reserve Track: No

I 14:18:02 Link Size: Auto

I 14:18:02 Test Mode: No

I 14:18:02 OPC: No

I 14:18:02 BURN-Proof: Enabled

I 14:18:02 Book Type Setting: DVD-ROM

I 14:18:04 Filling Buffer... (40 MB)

I 14:18:04 Writing LeadIn...

I 14:18:26 Writing Session 1 of 1... (1 Track, LBA: 0 - 887506)

I 14:18:26 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 887506)

I 14:21:27 Synchronising Cache...

W 14:37:12 I/O Interface 'Debug Mode' has been Enabled!

I 14:37:13 [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 14:37:13 CDB: 25 00 00 00 00 00 00 00 00 00

I 14:37:13 CDB Interpretation: Read Capacity

E 14:37:13 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 0E 04 08 00 80 00 00 00 00 00 00 00 00

E 14:37:13 SENSE Interpretation: Logical Unit not ready, Long Write in progress

Share this post


Link to post
Share on other sites

Make sure you have the latest drivers available for your motherboard's chipset. If it's nvidia then try older versions to see if it helps.

Share this post


Link to post
Share on other sites
Make sure you have the latest drivers available for your motherboard's chipset. If it's nvidia then try older versions to see if it helps.

 

Mobo is Gigabyte GA-965P-DQ6 with Intel chipset, drive is LG GGC-H20L with latest firmware v1.3...

Share this post


Link to post
Share on other sites

Well, until I can get some help from LUK on this issue, I've installed a Vista 64 powertoy that burns iso's to CDs/DVDs, just tried it with the same iso image I was having difficulties with and worked great. For those who are having similar problems, it is ISO Recorder v3, freely available from http://isorecorder.alexfeinman.com/isorecorder.htm... not as nice as ImgBurn, but works on Vista 64.

Share this post


Link to post
Share on other sites

Try using the incremental write type, ImgBurn itself works fine on x64.

 

Your drive/system is the thing saying it's still busy burning (assuming the debug info in the log extract below kept scrolling in the window)

 

I 14:37:13 [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 14:37:13 CDB: 25 00 00 00 00 00 00 00 00 00

I 14:37:13 CDB Interpretation: Read Capacity

E 14:37:13 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 0E 04 08 00 80 00 00 00 00 00 00 00 00

E 14:37:13 SENSE Interpretation: Logical Unit not ready, Long Write in progress

Share this post


Link to post
Share on other sites
Try using the incremental write type, ImgBurn itself works fine on x64.

 

Your drive/system is the thing saying it's still busy burning (assuming the debug info in the log extract below kept scrolling in the window)

 

Yes, the debug data kept repeating. Trying incremental write...

Share this post


Link to post
Share on other sites
Try using the incremental write type, ImgBurn itself works fine on x64.

 

Your drive/system is the thing saying it's still busy burning (assuming the debug info in the log extract below kept scrolling in the window)

 

Yes, the debug data kept repeating. Trying incremental write...

 

Well, another coaster and rebooting again... same issue, logs below:

 

I 17:50:13 Source File Application Identifier: UltraISO V8.6 CD & DVD Creator, ©2008 EZB Systems, Inc.

I 17:50:13 Source File File System(s): ISO9660, Joliet

I 17:50:13 Destination Device: [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 17:50:13 Destination Media Type: DVD+R (Disc ID: SONY-D11-00) (Speeds: 4x, 8x)

I 17:50:13 Destination Media Sectors: 2,295,104

I 17:50:13 Write Mode: DVD

I 17:50:13 Write Type: Incremental

I 17:50:13 Write Speed: MAX

I 17:50:13 DVD+R Reserve Track: No

I 17:50:13 Link Size: Auto

I 17:50:13 Test Mode: No

I 17:50:13 OPC: No

I 17:50:13 BURN-Proof: Enabled

I 17:50:13 Book Type Setting: DVD-ROM

I 17:50:14 Filling Buffer... (40 MB)

I 17:50:14 Writing LeadIn...

I 17:50:36 Writing Session 1 of 1... (1 Track, LBA: 0 - 887506)

I 17:50:36 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 887506)

I 17:53:37 Synchronising Cache...

W 17:53:59 I/O Interface 'Debug Mode' has been Enabled!

I 17:53:59 [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 17:53:59 CDB: 25 00 00 00 00 00 00 00 00 00

I 17:53:59 CDB Interpretation: Read Capacity

E 17:53:59 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 0E 04 08 00 80 00 00 00 00 00 00 00 00

E 17:53:59 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 17:54:00 [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 17:54:00 CDB: 25 00 00 00 00 00 00 00 00 00

I 17:54:00 CDB Interpretation: Read Capacity

E 17:54:00 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 0E 04 08 00 80 00 00 00 00 00 00 00 00

E 17:54:00 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 17:54:01 [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 17:54:01 CDB: 25 00 00 00 00 00 00 00 00 00

I 17:54:01 CDB Interpretation: Read Capacity

E 17:54:01 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 0E 04 08 00 80 00 00 00 00 00 00 00 00

E 17:54:01 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 17:54:02 [0:1:0] HL-DT-ST BDDVDRW GGC-H20L 1.03 (F:) (ATAPI)

I 17:54:02 CDB: 25 00 00 00 00 00 00 00 00 00

Share this post


Link to post
Share on other sites

No idea then, sorry.

 

ImgBurn is working just fine given the info the drive is reporting.

 

Try it with DVD+R Reserve Track turned on. (It's only 1 more disc, right?! :D )

 

I assume you have tried installing the latest chipset drivers from the intel site?

 

And if your controller is set to AHCI or RAID mode in the bios, make sure you install the latest Intel Matrix drivers off that site too.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.