s0ur Posted July 18, 2006 Posted July 18, 2006 (edited) just downloaded this program... havent tried to burn anything yet i get this error when i start the program up, and when i close it any ideas how to fix ??? Computer Specs Edited July 18, 2006 by s0ur
LIGHTNING UK! Posted July 18, 2006 Posted July 18, 2006 Your drivers must have problems supporting the command then (this is not normal, nor a good thing). 2 choices. 1. Fix your drivers. 2. Uncheck the 'Disable Media Change Notification' option in the settings.
s0ur Posted July 18, 2006 Author Posted July 18, 2006 updated the driver.. that didnt work so i changed the 'Disable Media Change Notification' option it stopped the error but will imgburn still work properly?
LIGHTNING UK! Posted July 19, 2006 Posted July 19, 2006 Well it'll just mean that other programs will still get to see changes in the state (ready/not ready) of the media. If they react to quickly, they may stop ImgBurn from doing its job quite so easily - or at all. Back in the old days, if you burnt stuff, you were supposed to disable autorun on your pc. That's basically what that option did - it blocks autorun. There's no reason for the latest motherboard / chipset drivers from your chipset manufacturer not to work (be it intel, nvidia, via etc) so there's a chance that a filter driver is causing the issue. If you download the filter drive load order tool from the following page, load it, select your burner in the list and then hit the 'clipboard' button. Then paste that info in here. http://www.bustrace.com/downloads/free_utilities.htm
s0ur Posted July 20, 2006 Author Posted July 20, 2006 ---------------------------------------------------- Filter Driver Load Order http://www.bustrace.com ---------------------------------------------------- Upper Class Filter: GEARAspiWDM Upper Class Filter: SiRemFil Upper Device Filter: redbook Device Object: HL-DT-ST DVDRAM GSA-H10N Lower Class Filter: PxHelp20 Lower Device Filter: imapi Driver Name: gearaspiwdm.sys File Location: c:\windows\system32\drivers File Description: CDRom Class Filter Driver File Version: 2.0.4.3 [2.0.4.3] Product Name: GEAR.wrks Product Version: 7.xx [2.0.4.3] Company Name: GEAR Software Inc. Driver Name: siremfil.sys File Location: c:\windows\system32\drivers File Description: Filter driver for Silicon Image SATALink controllers. File Version: 1, 1, 4, 0 [1.1.4.0] Product Name: Product Version: 1, 0, 0, 0 [1.0.0.0] Company Name: Silicon Image, Inc. Driver Name: redbook.sys File Location: c:\windows\system32\drivers File Description: Redbook Audio Filter Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation Driver Name: pxhelp20.sys File Location: c:\windows\system32\drivers File Description: Px Engine Device Driver for Windows 2000/XP File Version: 3.00.11B [3.0.11.1] Product Name: PxHelp20 Product Version: [2.0.0.0] Company Name: Sonic Solutions Driver Name: imapi.sys File Location: c:\windows\system32\drivers File Description: IMAPI Kernel Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation
LIGHTNING UK! Posted July 20, 2006 Posted July 20, 2006 ok well the only one that could be causing the issue there is the 'siremfil.sys' one. Besides a slight difference in the version number of pxhelp20.sys (2.03.32a Vs 3.00.11B), I know the others all work ok from first hand experience. Try visiting http://www.siliconimage.com/support/ and see if there is an updated driver for whatever 'satalink' device you have installed in your pc. I'm sure Device Manager will tell you the model number of it and from there you can just select it in the drop down box on that support website.
xanadu1979 Posted August 5, 2006 Posted August 5, 2006 (edited) I've got the same problem, been having it for a while, I've formatted a few times and that hasn't fixed the problem. Here's my output from that program. ---------------------------------------------------- Filter Driver Load Order http://www.bustrace.com ---------------------------------------------------- Upper Class Filter: GEARAspiWDM Upper Class Filter: SiRemFil Upper Device Filter: redbook Device Object: HL-DT-ST DVDRAM GSA-4167B Lower Class Filter: PxHelp20 Lower Device Filter: imapi Driver Name: gearaspiwdm.sys File Location: c:\windows\system32\drivers File Description: CDRom Class Filter Driver File Version: 2.0.4.3 [2.0.4.3] Product Name: GEAR.wrks Product Version: 7.xx [2.0.4.3] Company Name: GEAR Software Inc. Driver Name: siremfil.sys File Location: c:\windows\system32\drivers File Description: Filter driver for Silicon Image SATALink controllers. File Version: 1, 1, 4, 0 [1.1.4.0] Product Name: Product Version: 1, 0, 0, 0 [1.0.0.0] Company Name: Silicon Image, Inc. Driver Name: redbook.sys File Location: c:\windows\system32\drivers File Description: Redbook Audio Filter Driver File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2180 [5.1.2600.2180] Company Name: Microsoft Corporation Driver Name: pxhelp20.sys File Location: c:\windows\system32\drivers File Description: Px Engine Device Driver for Windows 2000/XP File Version: 3.00.11B [3.0.11.1] Product Name: PxHelp20 Product Version: [2.0.0.0] Company Name: Sonic Solutions Driver Name: imapi.sys File Location: c:\windows\system32\drivers File Description: IMAPI Kernel Driver File Version: 5.1.2600.2714 (xpsp.050705-1524) [5.1.2600.2714] Product Name: Microsoft? Windows? Operating System Product Version: 5.1.2600.2714 [5.1.2600.2714] Company Name: Microsoft Corporation Edited August 5, 2006 by xanadu1979
xanadu1979 Posted August 5, 2006 Posted August 5, 2006 Just realized my output is the same as that other guy's. He must have an Nforce4 board too. Mine is a MSI K8N Platinum SLI board. I'll try to find an upgrade for that satalink device and see if that fixes it.
xanadu1979 Posted August 5, 2006 Posted August 5, 2006 I downloaded the latest version of that Satalink driver, but the output is the same. I guess I already had the latest version.
LIGHTNING UK! Posted August 5, 2006 Posted August 5, 2006 Do you know if you're actually using that link controller? You could always just remove that entry from the filters list (backup the reg key first), reboot and then try imgburn again. As I'm sure I've mentioned before, I have no problems with my nforce4 board. Mine is a dfi lanparty one.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now