lfcrule1972
-
Posts
7,098 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by lfcrule1972
-
-
I am surprised at you donta !!
-
Didn't someone want to do this for a the "Heigh ho" song from Snow White in the dim and distant past ?
-
Other than what digi said you should ensure you are using Verbatim DVD+R DL's ideally the MKM 001 dye and then you are giving yourself the best chance of success. Other dual layer media is shitty and that's being kind.....
-
All good points above, especially the jitter score but to me a scan quality score of 96.18% isn't too bad, as Corny said it would be lower with jitter but on the whole I would think this would be ok.....
-
Really any in depth guide should be written by the programs author, Nic W, that said one of the beta team, posted a nice topic on this a while back.....
http://forum.imgburn.com/index.php?showtop...p;hl=DVDinfoPro
Hopefully this will tell you a bit more about the scan results produced with ImgBurn. Failing that a search on Google might help, I remember just experimenting with it when I first installed it. The others will tell you I am no expert but it was reasonably intuitive from memory.
-
I love that smilie !!
-
You gotta love that decent media
-
Well done on having the patience and the $ to stick with it !!
-
Good news ! Thanks for all that Jack
-
From: http://www.afterdawn.com/news/archive/10884.cfm
Verbatim has issued a warning on its corporate website for Australia and New Zealand about an unauthorized supply of 16X DVD's
that use MID codes of Verbatim and related companies. Here is the company's warning... Verbatim Corporation has concerns regarding the unauthorised supply in Australia by Laser Corporation Holdings Pty Ltd of some Laser brand 16X DVD's which use MID codes of Verbatim or its related companies.Disk identification shows that these Laser brand 16X DVD's are not from production facilities approved by Verbatim or its related companies and so may be of different quality or performance as disks from production facilities approved by Verbatim or its related companies.Verbatim is without any responsibility for the quality or performance of these Laser brand 16X DVD's.In addition, Laser's supply of these 16X DVD's in Australia may infringe copyright.Verbatim and its related companies reserve their legal rights in respect to the supply in Australia by Laser of these 16X DVD's.Source:
-
Ask and you shall receive, well sometimes, if the law allows and the boss can be arsed.....
-
Did the original poster not come back then ?
-
Sorry to hear of the troubles you have experienced kirk.....
-
-
http://forum.imgburn.com/index.php?s=&...post&p=6175
This may help, looks like the pics from the guide have gone walkabout but updating fw as suggested by both corny and blu is quite straight forward, post back if you need any help with it.
You may also do better if you cap the burn speed to 8x as well
but I would do the firmware (fw) update first. -
Yeah ? Mmm I don't see any problems with my setup on discs that have passed an ImgBurn verify, maybe if I did then I would I need to look at those again then. The way I work is that I use ImgBurn to burn and verify and then if there are problems I look at PI/PIF scans to see how bad things really are
-
-
I always verify. Noobs or not, I recommend it.
Regards
Good advice, I have always verified right back from when I started with ImgBurns predecessor, after all I am not so busy that I can't spare a few more minutes
-
All funny and I like the film too !
-
-
I would concur with the opinion on Pioneers, solid reliable and great burns
-
-
and the Australian supercar or luxury car is what exactly ?? A Holden ???
-
I hate Aston Martins mate - overpriced pieces of shit !!
device not ready(logical unit not ready, cause not repotable)
in ImgBurn Support
Posted
How old is the DVD drive ? Does it still play DVD's and or CDs ok ? What discs are you using, ideally the Media ID on the discs if you happened to notice before the drive went off ?