Jump to content


  • Posts

  • Joined

  • Last visited

dreamsat's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. Hi! Problem solved after updating drivers to ASMedia 106x SATA3 AHCI driver v2.0.3.1 WHQL. My card have firmware 0951 You can find it here http://www.win-raid.com/t29f25-Recommended-AHCI-and-RAID-Drivers.html Now all working fine.
  2. Hi! First of all thank you LIGHTNING UK! for implementing Generic Robotic support and Roboman for starting the topic. I have old MFDigital Scribe EC with CD-Robotic CAT-700 Controller and tower with 4 SATA drives (Initially it was FW to IDE tower) + Rimage Prism Printer connected through COM + usb. I would like to ask few questions. First when I associate 4 drive to robot it's OK. But robot working only with one drive. Is that possible add support for all 4 drives? Maybe I miss something in setup? Is there any chance to add support for Rimage Prism Plus Printer? Thank you!
  3. Yes. 2 comp clean and 1 not so much. Effect the same. Maybe something wrong with xp drivers. UPD: When I installed drivers 1.3.4 in win 7 64bit I had same error! This strange because you mentioned that you don't have this problem even when you update the drivers manually to 1.3.4. Controller appears in wrong section. Remove and installing drivers again solve the problem. All works perfect in W7 64bit even with 1.3.4 driver.
  4. Win 7 64bit All working fine! Problem in XP 32 bit.
  5. How do you determine which version firmware in card? Mine not show it in post message. Maybe there is another way? I have two identical card. One I flashed other not. I can't see what version in stock card.
  6. It gets interesting. I put same controller into other computer with older motherboard X48T. And there if you flash ide firmware IMGBURN works fine. If you flash AHCI firmware you've got error describing above. In ide mode no controller is visable as asmedia 106x in device tab but CDRW visable and working. No drivers needed and device shown as standart dual channel controller. That's strange because on newer motherboard ла61 there no difference between two modes and drivers always needed. XP 32bit. I will test it on X7 64 soon.
  7. I tried them all. Nero works fine that's what not give me closure. I wrote to espada but not get response yet.
  8. http://www.station-drivers.com/page/asmedia.htm I have updated firmware from the link above. Tried IDE and AHCI mode all the same. Not working, only after pressing F5 I see change.
  9. Ok. I think I pressed F5 in log window earlier and that is why nothing happens. Now when I pressed F5 in main windows that is clear the windows or Read the blank disk. This is working with F5. I want to ask this is only problem or maybe somewhere else something may not be reporting properly with this controller?
  10. Yep. No disk at all. OK. Thank you! Is there any chance is it drivers problem not chipset? Not recognized drive through silicon image IDE SATA connector. Cycling flash led on DVDRW and nothing. I think you right. This is only for HDD!
  11. Maybe you right. But http://www.espada-tech.ru/pr_-38309.shtml says HDD, DVD And I am aware about inconsistency in site descriptions. But other programs works and imgburn works only need to open ez-mode and choose. Log changing I/O: ImgBurnIO.log
  12. Nothing! Cycling and nothing changing. I 02:49:00 [1:15:0] Optiarc DVD RW AD-5280S 1.01 (G:) (ATA) I 02:49:00 CDB: 00 00 00 00 00 00 I 02:49:00 CDB Interpretation: Test Unit Ready Change device class to device interface and vise versa while disk inside and cycling -> lead to determining disk. But after that no change again. Drive letter give error.
  13. Yep. nothing changing either. Driver 05-01-2012. I think you right mayby other programs using other way to determine it.
  14. Yep. After starting the program and open task log file cycling those even after inserting disk I 02:30:10 [1:15:0] Optiarc DVD RW AD-5280S 1.01 (G:) (ATA) I 02:30:10 CDB: 00 00 00 00 00 00 I 02:30:10 CDB Interpretation: Test Unit Ready I 02:30:11 [1:15:0] Optiarc DVD RW AD-5280S 1.01 (G:) (ATA) I 02:30:11 CDB: 00 00 00 00 00 00 I 02:30:11 CDB Interpretation: Test Unit Ready I 02:30:12 [1:15:0] Optiarc DVD RW AD-5280S 1.01 (G:) (ATA) I 02:30:12 CDB: 00 00 00 00 00 00 I 02:30:12 CDB Interpretation: Test Unit Ready I 02:30:13 [1:15:0] Optiarc DVD RW AD-5280S 1.01 (G:) (ATA) In nero I can open and close tray and it detemine disk or no disk properly. Strange. But never mind. If you don't know I don't know who knows! Thank you!
  15. After inserting disk nothing happens. That is the problem. Only after again open task. That would be case if other programs didn't work too IMHO. But nero burning rom 11 and ultraiso working fine. if I put drive on H61 onboard it's works with imgburn fine too. But I was curious why other programs works and imgburn doesn't.
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.