Write Error on New Drive (GBW-H20L) Log included

[ecattell]

I installed the GBW-H20L blu-ray burner. Everything on my computer has updated firmware (SATA controller included).

 

I have tried burning with two discs--a Memorex BD-RE and a Sony BD-R. Both discs seem to error before the lead-in, though they have different errors.

 

When I try to burn with this BD-R, this is the log:

 

 

 

 

 

 

 

I 16:14:14 ImgBurn Version 2.4.4.0 started!

I 16:14:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 16:14:14 Total Physical Memory: 2,882,000 KB - Available: 2,167,988 KB

I 16:14:14 Initialising SPTI...

I 16:14:14 Searching for SCSI / ATAPI devices...

I 16:14:16 Found 1 DVD

[mmalves]

With ImgBurn in Write mode, insert that BD-R disc and, after the drive recognizes the disc, copy all the text shown in the Information box on the right side of ImgBurn's window.

 

As for the memorex BD-RE, have you tried a Full Erase on that disc? Keep in mind though that it'll take quite a lot of time to complete.

[ecattell]

With ImgBurn in Write mode, insert that BD-R disc and, after the drive recognizes the disc, copy all the text shown in the Information box on the right side of ImgBurn's window.

 

As for the memorex BD-RE, have you tried a Full Erase on that disc? Keep in mind though that it'll take quite a lot of time to complete.

 

I've tried a full erase.

 

This is what it says about the disc:

 

HL-DT-ST BD-RE GBW-H20L YG01 (ATA)

Current Profile: BD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 12,219,392

Free Space: 25,025,314,816 bytes

Free Time: 2715:27:17 (MM:SS:FF)

Supported Write Speeds: 2x

 

BD Disc Information:

Disc ID: SONY-NN3-02

Disc Type: BD-R

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 12219391 (0x00BA73FF)

-> RS: 11,161 KB/s (2.5x) - WS: 8,991 KB/s (2x)

[LIGHTNING UK!]

I think you'll find Verbatim media to be far more 'compatible' with LG BD drives than all the other stuff.