igl Posted April 22, 2009 Share Posted April 22, 2009 hi! I'm puzzled, so many choices and I would like to know which one would you define as 'best' or 'optimal' Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 22, 2009 Share Posted April 22, 2009 Yeah that one will do. Are you burning onto DVD-R DL media there btw? Link to comment Share on other sites More sharing options...
igl Posted April 22, 2009 Author Share Posted April 22, 2009 (edited) only +R DL Edited April 22, 2009 by igl Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 22, 2009 Share Posted April 22, 2009 Are you making an image rather than burning direct then? I ask this because it appears to be padding to the exact same LBA - which is what happens when the media is DVD-R DL or you set the double layer media profile to DVD-R DL. Link to comment Share on other sites More sharing options...
igl Posted April 22, 2009 Author Share Posted April 22, 2009 no image, target is dvd recorder. Link to comment Share on other sites More sharing options...
mmalves Posted April 22, 2009 Share Posted April 22, 2009 With the blank disc in the drive, please copy all the text shown in the Information box under the Device tab. Link to comment Share on other sites More sharing options...
igl Posted April 23, 2009 Author Share Posted April 23, 2009 its SCSI because its connected to a PCI Controller PLEXTOR DVDR PX-760A 1.07 (SCSI)Current Profile: DVD+R DL Disc Information:Status: EmptyErasable: NoFree Sectors: 4.173.824Free Space: 8.547.991.552 bytesFree Time: 927:32:74 (MM:SS:FF)Supported Write Speeds: 4x; 6x; 8x; 10x DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 23, 2009 Share Posted April 23, 2009 None of that adds up then. Your screenshot must have been from when you had 'Output' set to 'Image File' or when you had a DVD-R DL in the drive. Link to comment Share on other sites More sharing options...
Recommended Posts