Spawn Posted April 23, 2009 Posted April 23, 2009 (edited) I 23:12:49 ImgBurn Version 2.4.4.0 started! I 23:12:49 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 23:12:49 Total Physical Memory: 1,046,704 KB - Available: 630,852 KB I 23:12:49 Initialising SPTI... I 23:12:49 Searching for SCSI / ATAPI devices... I 23:12:49 Found 1 DVD Edited April 23, 2009 by Spawn
mmalves Posted April 23, 2009 Posted April 23, 2009 Does it recognize other DVD discs? e.g. ImgBurn shows "Ready (Disc Not Empty)" in the status bar. If it does, please copy all the text shown in the Information box on the right-side of ImgBurn's window.
Spawn Posted April 23, 2009 Author Posted April 23, 2009 This is what it says when I put in a dvd movie (in this case V for Vendetta also it said disk not empty): TSSTcorp CD/DVDW TS-L532M HR08 (ATA) Current Profile: DVD-ROM Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 3,771,763 Size: 7,724,570,624 bytes Time: 838:12:13 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 3771762) -> LeadOut (LBA: 3771763) Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,594 Last Physical Sector in Layer 0: 2,082,495 Layer Information: Layer 0 Sectors: 1,885,888 (50%) Layer 1 Sectors: 1,885,875 (50%)
blutach Posted April 23, 2009 Posted April 23, 2009 How about putting in another blank disc. What does it say? Regards
Spawn Posted April 23, 2009 Author Posted April 23, 2009 For a blank disk it says: TSSTcorp CD/DVDW TS-L532M HR08 (ATA) Current Profile: N/A
blutach Posted April 23, 2009 Posted April 23, 2009 With no other info at all about the disc? Regards
Spawn Posted April 23, 2009 Author Posted April 23, 2009 (edited) Unfortunately that's all it says with the blank disk in it. I've also changed my settings to 1x and 8x... it still doesn't want to write though. T_T Edited April 23, 2009 by Spawn
blutach Posted April 23, 2009 Posted April 23, 2009 Either the discs are totally shot or the drive/drive controller is. But, since the drive can read original DVDs, well, it may just be the discs. Try to put one of those discs in another machine with ImgBurn on it and see what it says (i.e. if it can give full disc info). Regards
Spawn Posted April 23, 2009 Author Posted April 23, 2009 I used a few of the disks I had before to burn things on the computer I'm using now and it worked fine/has been working fine. The error just came up today before I updated the program, I figured if I updated it, the program would fix itself. :-/ I'll give what you said a shot later today though.
LIGHTNING UK! Posted April 23, 2009 Posted April 23, 2009 This is a drive issue and nothing to do with the program. If the drive can't initialise the disc properly then no software can do anything about it. Try cleaning your drive.
Spawn Posted April 23, 2009 Author Posted April 23, 2009 Hooray, it works now, thanks everyone for your help. Stupid dust lol.
Recommended Posts