loser Posted April 30, 2009 Posted April 30, 2009 --------------------------- ImgBurn --------------------------- I/O Error! Device: [2:1:0] TSSTcorp CD/DVDW TS-H653L 0514 (E:) (Fibre) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 25 DE E0 00 00 20 00 Interpretation: Write (10) - Sectors: 2481888 - 2481919 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 Interpretation: Invalid Address For Write --------------------------- Retry Cancel --------------------------- Keep getting this along with write sector errors. Could someone help me out with this. Thanks
Dialysis1 Posted April 30, 2009 Posted April 30, 2009 Update your firmware. http://h10025.www1.hp.com/ewfrf/wc/softwar...product=3453999 If it still fails, post the ImgBurn log.
mmalves Posted April 30, 2009 Posted April 30, 2009 http://www.firmwarehq.com/Samsung/TS-H653L/files.html
LIGHTNING UK! Posted April 30, 2009 Posted April 30, 2009 To be fair, I only added those files to FirmwareHQ after reading this thread
loser Posted May 5, 2009 Author Posted May 5, 2009 I 12:59:01 ImgBurn Version 2.4.4.0 started! I 12:59:01 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:59:01 Total Physical Memory: 1,963,848 KB - Available: 869,164 KB I 12:59:01 Initialising SPTI... I 12:59:01 Searching for SCSI / ATAPI devices... I 12:59:20 Found 1 DVD
LIGHTNING UK! Posted May 5, 2009 Posted May 5, 2009 You didn't update your firmware. Please do that and then read this: http://forum.imgburn.com/index.php?showtopic=8000
loser Posted May 5, 2009 Author Posted May 5, 2009 did that and still error.. I 13:49:28 ImgBurn Version 2.4.4.0 started! I 13:49:28 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 13:49:28 Total Physical Memory: 1,963,848 KB - Available: 667,304 KB I 13:49:28 Initialising SPTI... I 13:49:28 Searching for SCSI / ATAPI devices... I 13:49:29 Found 1 DVD
loser Posted May 5, 2009 Author Posted May 5, 2009 i am using verb... i don't undestand it.. why i burn it even at 2x n try 2.4x...id understnad
blutach Posted May 5, 2009 Posted May 5, 2009 You are not! You are using I 13:50:27 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x) which are junk. Verbatim do not make or brand media with this media code. Now, stop bullshitting us and go get Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore Regards
loser Posted May 6, 2009 Author Posted May 6, 2009 i did have them at one point.. had some backed up onces on memorex... why does now it not want to work.. after i had backd up onces working?
loser Posted May 6, 2009 Author Posted May 6, 2009 (edited) Would a external drive work better is it the drive it self or jus the disc.. cause it makes loud nose when burning.. replaced drive once Edited May 6, 2009 by loser
mmalves Posted May 6, 2009 Posted May 6, 2009 Buy a couple of the Verbatim DVD+R DL blanks specified in the thread above and try them out.
blutach Posted May 6, 2009 Posted May 6, 2009 It doesn't wanna work cos the media is marginal at best. I've never had a bad burn - not one - with Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore. Regards
loser Posted May 6, 2009 Author Posted May 6, 2009 There any settings in this program that I could change to make these disk work. They have had good burns on other computers. Memorex Disks. Like I know theres plenty of settings in this program. So at wtich can be switched around to do diffrent things. Could you let me know. My friend used once of my disk and it worked on his computer..
blutach Posted May 6, 2009 Posted May 6, 2009 No. Just take the very good advice you've been given. Sell your shitty Memorex discs to your friend Regards
mmalves Posted May 6, 2009 Posted May 6, 2009 The burns process depends on the burner/firmware/media combination: the software (and its settings) doesn't even come into it.
Cynthia Posted May 6, 2009 Posted May 6, 2009 Program Memory Area Update Failure You have another image (ISO file) you can try to burn?
spinningwheel Posted May 6, 2009 Posted May 6, 2009 There any settings in this program that I could change to make these disk work. Loser; FFS, quit looking for another way out and get rid of the shit discs that you have and get the damned Verbs. You can look for other reasons all day long, but the short answer has been given to you, accept it and move on!
rivrwing Posted May 7, 2009 Posted May 7, 2009 Help please. Same error message as shown above in this thread. IMGBURN worked just fine until suddenly this error message pops up at every burn attempt. No change in burner (1 mo old w/ latest firmware), no change in media (same spindle Sony DVD+R that has burned 100% ok with IMGBURN ongoing with this and previous burner), burner burns fine no errors with other burning software just not with IMGBURN!!! Suggestions?
mmalves Posted May 7, 2009 Posted May 7, 2009 Start your own thread and post a log showing the problem (look in ImgBurn's Help menu).
rivrwing Posted May 7, 2009 Posted May 7, 2009 Thanks mmales, I realize I should have done that, but please disregard my immediatley previous post in any case as the issue is now resolved. For some reason I did not think to do the obvious earlier, but I just now uninstalled and reinstalled the burner and the problem has resolved! Maybe it's worth a try for those also having this issue?
mmalves Posted May 7, 2009 Posted May 7, 2009 I/O errors are reported directly by the drive and they can have a lot of different meanings (i.e. not all I/O errors are the same). That's why we ask for the log, so that we can see the I/O error description.
Recommended Posts