Jump to content



Recommended Posts

nope what that mean is your drive is not located at G:so the bat file i did for you would not work as your device is located at K:


so get this and copy it to the folder you downloaded from me, when it says overwrite say yes, then run it.





just dont go swapping the ide cable the drive is connected to , or switch on any external usb devices that will shift your drive letters around, as in your original log file the drive was located at G: which is why i setup ascii.bat to be G: when from the info you posted in pic after i asked you to run dvdrflash by double clicking it your pioneer drive is located at K: which is why i updated the ascii.bat file for you to download and replace.

Edited by dontasciime
Link to comment
Share on other sites

  • 2 weeks later...

Hi, I just thought id drop by an say cheers for all of your help LIGHTNING UK!, dontasciime, cornholio7, lfcrule1972 etc. Btw I got it to burn lol I flung my old copier in the bin and just got a new Phillips one for a massive ?40 LOL (jk)! and replaced it, and it burns like a treat :thumbup: Thanks a lot.

Edited by sober
Link to comment
Share on other sites

  • 4 weeks later...

I'm having the exact same error, also with a Pioneer DVD writer, one which came with my very average Acer laptop. The full log is below - is there anything I can do other than buy a new drive/laptop? :-)


AFAIK my firmware is up-to-date...


Thanks in anticipation



I 20:16:53 ImgBurn Version started!

I 20:16:53 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 20:16:53 Initialising SPTI...

I 20:16:53 Searching for SCSI / ATAPI devices...

I 20:16:53 Found 1 DVD?RW!

I 20:19:49 Operation Started!

I 20:19:49 Source File: D:\illy.iso

I 20:19:49 Source File Sectors: 1,153,378 (MODE1/2048)

I 20:19:49 Source File Size: 2,362,118,144 bytes

I 20:19:49 Source File Volume Identifier: PROSHOW_DVD

I 20:19:49 Source File Application Identifier: PHOTODEX PROSHOW DVD

I 20:19:49 Source File Implementation Identifier: Photodex Proshow DVD

I 20:19:49 Source File UDF Revision: 1.02

I 20:19:49 Destination Device: [1:0:0] PIONEER DVD-RW DVR-K12RA 1.10 (E:) (ATA)

I 20:19:49 Destination Media Type: DVD+R (Disc ID: IS01-001-00) (Speeds: 2.4x)

I 20:19:50 Destination Media Sectors: 2,295,104

I 20:19:50 Write Mode: DVD

I 20:19:50 Write Type: DAO

I 20:19:50 Write Speed: 2x

I 20:19:50 Link Size: Auto

I 20:19:50 Test Mode: No

I 20:19:50 BURN-Proof: Enabled

I 20:19:50 Filling Buffer...

I 20:19:50 Writing LeadIn...

W 20:20:06 Failed to Write Sectors 768 - 799 - Power Calibration Area Error

W 20:20:06 Retrying (1 of 20)...

Link to comment
Share on other sites

you could buy some better discs, i've never even seen any with that mid and with a supported speed of 2.4x, i wouldn't be too hopeful.

did you choose 2x as the burn speed ? because its not a supported speed

Link to comment
Share on other sites

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.