Giri Posted May 8, 2009 Posted May 8, 2009 i burnt a disc image from harddisk using Nero 7 , the disc is 6.9 GB so used a double layer disc . It copied at 4x, the process took about 17 Mins after 100% during short lead-out an error occured (power calibration error, to be precise ) and the process failed .. but the disc is able to be read , i want to verify whether all contents were copied sucessfully but th verify option in ImgBurn does not show the disc at all ( it says no disc in drive ) does it not read dual layer DVD ?
mmalves Posted May 8, 2009 Posted May 8, 2009 The Verify mode can read any type of disc that your drive supports. Are you sure the right drive is selected in the Source drive list?
mmalves Posted May 8, 2009 Posted May 8, 2009 Then your drive isn't recognizing the disc. Where is the disc able to be read as you said?
Giri Posted May 9, 2009 Author Posted May 9, 2009 when i goto my computer , i can open the disc and read all the files
Shamus_McFartfinger Posted May 9, 2009 Posted May 9, 2009 Do you see the pink bit at the top of the page? It says: "It's much easier for us if you include a copy of the program's log in your post." Post the log so we have an idea what the problem is. Help Menu > Logs
Giri Posted May 9, 2009 Author Posted May 9, 2009 this is the log 12:55:06 ImgBurn Version 2.4.4.0 started! 12:55:06 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) 12:55:06 Total Physical Memory: 3,404,312 KB - Available: 1,947,980 KB 12:55:06 Initialising SPTI... 12:55:06 Searching for SCSI / ATAPI devices... 12:55:07 Found 2 DVD
mmalves Posted May 9, 2009 Posted May 9, 2009 12:57:31 Source Device: [0:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (G:) (ATA) Update the firmware on your burner (remove any disc and close tray before updating then reboot after it's finished). If that doesn't solve your problem, try verifying with the other drive you have.
LIGHTNING UK! Posted May 9, 2009 Posted May 9, 2009 With that disc in the drive, copy + paste the disc information from the panel on the right please. It would appear your drive is just seeing it as a blank disc - or at least it was when you produced that log file.
Recommended Posts