Fatdog Posted May 10, 2009 Posted May 10, 2009 First time post so be gentle!! Have ruined about a dozen discs so far and this is cracking me up. Never had a problem burning my discs but hadn't done so in a while.Tried today for the first time in about a month.Did the usual procedure but when I put the disc into the 360 I get "Play DVD" and the disc won't load. I have not changed any settings since last time. I am using a NEC ND-3500 drive and the firmware is up to date. I have also tried several different OEM firmwares but no joy either. I have tried AONE DL discs but switched to Verbatims but they also come out "Play DVD." I tried a few other programmes and they also came out with the same result. My log is below. Could somebody advise me how to get the discs working again? Thanks in advance.... I 21:16:23 ImgBurn Version 2.4.4.0 started! I 21:16:23 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 21:16:23 Total Physical Memory: 2,094,976 KB - Available: 1,042,236 KB I 21:16:23 Initialising SPTI... I 21:16:23 Searching for SCSI / ATAPI devices... I 21:16:23 Found 1 DVD-ROM and 1 DVD
mmalves Posted May 10, 2009 Posted May 10, 2009 I 21:16:33 Destination Media Sectors: 3,827,520 That disc was damaged in a previous failed burn. Also you should verify your discs to make sure they were correctly burned.
LIGHTNING UK! Posted May 10, 2009 Posted May 10, 2009 Have you considered that burn/disc itself might not be the issue? (assuming it passes verification ok)
LIGHTNING UK! Posted May 10, 2009 Posted May 10, 2009 lol That's 3 waves if I counted correctly. Waving 3 times, what's all that about?!
Fatdog Posted May 11, 2009 Author Posted May 11, 2009 Done a new burn this morning with a Verbatim and checked Verify and still the Play DVD logo appears.Here is my new log..... I 06:49:13 ImgBurn Version 2.4.4.0 started! I 06:49:13 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 06:49:13 Total Physical Memory: 2,094,976 KB - Available: 1,007,220 KB I 06:49:13 Initialising SPTI... I 06:49:13 Searching for SCSI / ATAPI devices... I 06:49:22 Found 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted May 11, 2009 Posted May 11, 2009 Any idea why it's not working? Yes. Did you even bother to read the posts above? There is nothing wrong with your burn so I suggest you look elsewhere... and by that I don't just mean to forget about it being an ImgBurn issue (because it's not), I mean to look on another forum - one that's actually related to XBOX360.
Recommended Posts