DubzMixed Posted May 17, 2009 Posted May 17, 2009 I have just tried to burn a .dvd file and i reached 72% and got and error here is a copy of my log: I 18:15:03 ImgBurn Version 2.4.2.0 started! I 18:15:03 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 18:15:03 Total Physical Memory: 1,046,464 KB - Available: 463,816 KB W 18:15:03 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 18:15:03 Initialising SPTI... I 18:15:03 Searching for SCSI / ATAPI devices... I 18:15:03 Found 1 DVD
mmalves Posted May 17, 2009 Posted May 17, 2009 I 18:15:03 ImgBurn Version 2.4.2.0 started!I 18:16:21 Destination Device: [0:1:0] TSSTcorp CD/DVDW TS-H653L 0514 (E:) (Fibre) W 18:44:55 Failed to Write Sectors 2755040 - 2755071 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) Update ImgBurn to the latest version. There's newer firmware available for your burner, but hold off on updating the drive until this logical unit communication error is solved. You need to install updated drivers for the SATA controller where the burner is connected to. First, run Windows Update (look in Control Panel) in order to update your Windows Vista (this feature sometimes also finds updated drivers for your hardware). Alternatively you can use SIW/Sandra/etc to find which SATA controller(s) you have and manually download and install drivers from the manufacturers.
LIGHTNING UK! Posted May 17, 2009 Posted May 17, 2009 You can put Vista SP1 on when you're bored. Hell, SP2 will be out any day now too.
DubzMixed Posted May 19, 2009 Author Posted May 19, 2009 Oh right okay thanks alot! will update and try again
egads04 Posted July 7, 2009 Posted July 7, 2009 I have a very similar problem -- but my error occurs during writing the Lead-In. Also with a Samsung drive (SH-203B). Same error on both cheap Ridata media and HP media. The HP media has been known to work for 100s of discs so far on this OS/drive. I installed Ubuntu Linux as a dual boot and immediately afterwards the drive fails to burn in Windows (must be unrelated, but felt I should mention in case anyone knows otherwise). I tried updating firmware from SB00 to SB04 for the drive. Same error. I 21:45:03 ImgBurn Version 2.4.2.0 started! I 21:45:03 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:45:03 Total Physical Memory: 3,668,460 KB - Available: 2,961,052 KB I 21:45:03 Initialising SPTI... I 21:45:03 Searching for SCSI / ATAPI devices... I 21:45:03 Found 1 DVD
egads04 Posted July 7, 2009 Posted July 7, 2009 And here's the log after I updated to latest ImgBurn. Is my drive toast? I 21:58:08 ImgBurn Version 2.4.4.0 started! I 21:58:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:58:08 Total Physical Memory: 3,668,460 KB - Available: 2,806,412 KB I 21:58:08 Initialising SPTI... I 21:58:08 Searching for SCSI / ATAPI devices... I 21:58:08 Found 1 DVD
mmalves Posted July 7, 2009 Posted July 7, 2009 I 21:45:03 ImgBurn Version 2.4.2.0 started! Update ImgBurn. Look for a newer BIOS for your motherboard. Try your burner on another SATA port with another SATA cable. You should also look for updated drivers for your motherboard's chipset, or at least for the controller where the burner is connected. If all that doesn't help try what this post says (removing controllers/etc).
Recommended Posts