syncis Posted June 6, 2009 Posted June 6, 2009 i have always been able to burn games with really no errors for long time, until i installed Windows 7. Now when i am trying to burn a game, i am getting I/O error. I have tried burning the same game in clonecd and imgburn like 6-7 times, and it stoppes at different places. What can it be ? Please help I have a nec 3520AW
fuzzmaster Posted June 6, 2009 Posted June 6, 2009 Post the log please. I've got the same problem. Here's my log: LITE-ON DVDRW LH-20A1S 9L08 (ATA) Current Profile: DVD-R Disc Information: Status: Incomplete Erasable: No Sessions: 1 Free Sectors: 464,608 Free Space: 951,517,184 bytes Free Time: 103:16:58 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x, 20x Pre-recorded Information: Manufacturer ID: SONY16D1 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,481,965 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 2,770 KB/s (2x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 11,080 KB/s (8x) Descriptor 5... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 16,620 KB/s (12x) Descriptor 6... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 22,160 KB/s (16x) Descriptor 7... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 24,930 KB/s (18x) Descriptor 8... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 8,864 KB/s (6.6x) - WS: 27,700 KB/s (20x)
mmalves Posted June 6, 2009 Posted June 6, 2009 That's not a log (look in ImgBurn's Help menu). And please start your own thread.
syncis Posted June 8, 2009 Author Posted June 8, 2009 That's not a log (look in ImgBurn's Help menu). And please start your own thread. ; I 22:36:20 ImgBurn Version 2.4.2.0 started! I 22:36:20 Media Center Edition (6.1, Build 7100) I 22:36:20 Total Physical Memory: 2
LIGHTNING UK! Posted June 8, 2009 Posted June 8, 2009 There's a newer release of ImgBurn out, you should update. Try burning at 4x, your 'old' drive might do a better job at that speed. Try a cleaning disc in the drive too. If all else fails, hunt down some of the 2.4x verbs (MKM-001-00 dye) or invest in a new drive.
syncis Posted June 8, 2009 Author Posted June 8, 2009 There's a newer release of ImgBurn out, you should update. Try burning at 4x, your 'old' drive might do a better job at that speed. Try a cleaning disc in the drive too. If all else fails, hunt down some of the 2.4x verbs (MKM-001-00 dye) or invest in a new drive. i have always burned with this drive, and always will 2.4x verbatim. i have tried the newest Imgburn to, still the same error. What can i do more? It stopped working when i switched to windows 7
LIGHTNING UK! Posted June 8, 2009 Posted June 8, 2009 I didn't say the new version would fix the problem, I just said you should update. You aren't using 2.4x verbatims, you're using the 8x ones. I 22:36:41 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x) If Windows 7 is being a problem for you, don't use it.
syncis Posted June 8, 2009 Author Posted June 8, 2009 I didn't say the new version would fix the problem, I just said you should update. You aren't using 2.4x verbatims, you're using the 8x ones. I 22:36:41 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x) If Windows 7 is being a problem for you, don't use it. Hmmmmm i did'nt think about that, i am using verb 8x , u are right !!!! i must have bought wrong. I will give it another try with 2.4x. I am still burning 2.4x with the 8x cd's. Hm
syncis Posted June 9, 2009 Author Posted June 9, 2009 ok Now i have tried to burn again with 2.4x and it didnt work, its stopped at 50% at sector 1913760-1913761 What can i do now ???
LIGHTNING UK! Posted June 9, 2009 Posted June 9, 2009 You tried MKM-001-00 discs? If cleaning the drive doesn't work, try the drive in another pc. If it works in the other PC, it's either the rest of your hardware or your OS. Like I said before, if Windows 7 isn't working for you, don't use it.
syncis Posted June 9, 2009 Author Posted June 9, 2009 You tried MKM-001-00 discs? If cleaning the drive doesn't work, try the drive in another pc. If it works in the other PC, it's either the rest of your hardware or your OS. Like I said before, if Windows 7 isn't working for you, don't use it. Yes i tried the MKM-001-00. Havent used a cleaning disc but i think its strange that it fails at 50% when its suppose to layer break. Dont you think that to?
LIGHTNING UK! Posted June 9, 2009 Posted June 9, 2009 You've only posted 1 log and it shows the drive erroring out before it gets to the layer break. As such, I don't find it strange at all.
syncis Posted June 9, 2009 Author Posted June 9, 2009 ; //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; tisdag, 09 juni 2009, 13:19:49 ; \\****************************************// ; ; I 12:53:38 ImgBurn Version 2.4.4.0 started! I 12:53:38 Microsoft Windows 7 Ultimate Edition (6.1, Build 7100) I 12:53:38 Total Physical Memory: 2
Recommended Posts