long_2413 Posted July 13, 2009 Posted July 13, 2009 (edited) hello~ i m new here. i just started using ImgBurn yesterday. i m trying to create an ISO from a copy disc. and the following error appears when i get up to 99% it said it's an I/O error... can anyone please tell me how can i get over this problem? it happens several times already.... here's the disc's information.... Optiarc DVD RW AD-7200S 1.0A (ATA) Current Profile: DVD-ROM Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2,295,072 Size: 4,700,307,456 bytes Time: 510:02:72 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2295071) -> LeadOut (LBA: 2295072) Track Information: Session 1... -> Track 01 (LTSA: 0, TS: 2295072, LRA: 0) Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,679 Last Physical Sector in Layer 0: 0 here is the log... I 20:16:14 ImgBurn Version 2.4.4.0 started! I 20:16:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 20:16:14 Total Physical Memory: 3,106,900 KB - Available: 2,125,676 KB I 20:16:14 Initialising SPTI... I 20:16:14 Searching for SCSI / ATAPI devices... I 20:16:14 Found 1 DVD Edited July 13, 2009 by long_2413
mmalves Posted July 13, 2009 Posted July 13, 2009 I 20:16:48 Source Device: [2:0:0] Optiarc DVD RW AD-7200S 1.06 (E:) (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. If it still doesn't work, check the disc for dirt/scratches/etc. You might also want to try reading that disc with other drives.
long_2413 Posted July 13, 2009 Author Posted July 13, 2009 You might also want to try reading that disc with other drives. sorry actually i m not really get used to computers... wt other drives can i use to read the disc? anyway really thanks for your help!
mmalves Posted July 13, 2009 Posted July 13, 2009 Try with any other drive that can read DVDs. If it errors out at the same spot then your disc is damaged or uses copy protection, and ImgBurn doesn't copy protected discs If you don't mind saying, what's on that disc?
long_2413 Posted July 13, 2009 Author Posted July 13, 2009 Try with any other drive that can read DVDs. If it errors out at the same spot then your disc is damaged or uses copy protection, and ImgBurn doesn't copy protected discs If you don't mind saying, what's on that disc? thank for your information! it's a Wii game call "Metal Slug", i m borrowing my friend's disc... it's a copy disc already...
LIGHTNING UK! Posted July 13, 2009 Posted July 13, 2009 Copy + paste the disc info from the panel on the right when you're back on the main screen (in Read mode) please.
Recommended Posts