bmurray1010 Posted July 15, 2009 Share Posted July 15, 2009 I am having terriible trouble burning with Imgburn my burns keep stopping at 50% everytime. Now I have had so much trouble with ImgBurn, I have been using the older dvd decrypter program with success until now. Even dvd decrypter is coming up with the same error. Until today I have had over 20 perfect burns. I know I have the best media and a clean lens, I also remember to set the book type. Please help I have wasted 5 discs in my new pack. Below is a copy of my log, the only thing I can think of is my older burner could be the problem. I have also tried burning at 4x speed, but no success. Please help. I 18:43:29 ImgBurn Version 2.4.4.0 started! I 18:43:29 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 18:43:29 Total Physical Memory: 523,628 KB - Available: 262,564 KB I 18:43:29 Initialising SPTI... I 18:43:29 Searching for SCSI / ATAPI devices... I 18:43:30 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted July 15, 2009 Share Posted July 15, 2009 If it can't burn the best DL media and the lens are clean then it's time for a new burner, don't you think? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 16, 2009 Share Posted July 16, 2009 Are your verbs from Singapore? Maybe this latest batch aren't and your burner just doesn't like them. Link to comment Share on other sites More sharing options...
bmurray1010 Posted July 16, 2009 Author Share Posted July 16, 2009 Yes, my verbatim dl's are from singapore this time. Any suggestions? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 16, 2009 Share Posted July 16, 2009 If the firmware is up-to-date and you've cleaned the drive, I guess it's time to take mmalves advice and buy yourself a new drive. Link to comment Share on other sites More sharing options...
S0L1DUS1 Posted July 29, 2009 Share Posted July 29, 2009 Hi im also having a an power calibration area error. before i get a new external burner i wanted someone to verify my problem. I burning my game onto the disk (verbatim 8x DVD+R DL) Ok here is my Log: I 04:14:18 Operation Started! I 04:14:18 Source File: C:\Users\User\Desktop\xxx-ufc.dvd I 04:14:18 Source File Sectors: 3,827,488 (MODE1/2048) I 04:14:18 Source File Size: 7,838,695,424 bytes I 04:14:18 Source File Volume Identifier: DVD_ROM I 04:14:18 Source File Volume Set Identifier: 356fc000MS UDFBridge I 04:14:18 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 04:14:18 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 04:14:18 Source File File System(s): ISO9660, UDF (1.50) I 04:14:18 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-861H 1.50 (E:) (ATA) I 04:14:18 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) I 04:14:18 Destination Media Sectors: 3,827,520 I 04:14:18 Write Mode: DVD I 04:14:19 Write Type: DAO I 04:14:19 Write Speed: 2.4x I 04:14:19 Link Size: Auto I 04:14:19 Lock Volume: Yes I 04:14:19 Test Mode: No I 04:14:19 OPC: No I 04:14:19 BURN-Proof: Enabled I 04:14:19 User Specified L0 Data Zone Capacity: 1,913,760 I 04:14:19 Set L0 Data Zone Capacity Succeeded! I 04:14:19 Filling Buffer... (40 MB) I 04:14:20 Writing LeadIn... W 04:14:20 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 04:14:20 Retrying (1 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (2 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (3 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (4 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (5 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (6 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (7 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (8 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (9 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (10 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (11 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (12 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (13 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (14 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (15 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (16 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (17 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (18 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (19 of 20)... W 04:14:20 Retry Failed - Reason: Power Calibration Area Error W 04:14:20 Retrying (20 of 20)... W 04:14:21 Retry Failed - Reason: Power Calibration Area Error W 04:14:24 Retrying (21)... W 04:14:24 Retry Failed - Reason: Power Calibration Area Error W 04:14:27 Retrying (22)... W 04:14:27 Retry Failed - Reason: Power Calibration Area Error E 04:14:28 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error I 04:14:28 Synchronising Cache... W 04:14:31 User opted to skip the 'Close Track/Session/Disc' functions. E 04:14:31 Failed to Write Image! E 04:14:31 Operation Failed! - Duration: 00:00:12 I 04:14:31 Average Write Rate: N/A - Maximum Write Rate: N/A Link to comment Share on other sites More sharing options...
spinningwheel Posted July 29, 2009 Share Posted July 29, 2009 get a new external burner Link to comment Share on other sites More sharing options...
Recommended Posts