lbouchard Posted March 18, 2006 Posted March 18, 2006 I have made about 10 coasters over the last two days... all with the same iso/mdf files. the burning fails near the layer break. please see log file. should i rebuilt the mdf file inside ImgBurn? is there something wrong with my setup. i am using latest version of software and firmware. ImgBurn_LOVE_ACTUALLY.log
Movie Junkie Posted March 18, 2006 Posted March 18, 2006 (edited) Your log file shows you're using Ritek. The ONLY DL media you should use is Verbatim! Make sure you use the Verbatim DVD+R DL and not the DVD-R DL. I say that because their DVD-R DL discs are too new and I haven't heard anything about them. Edited March 18, 2006 by Movie Junkie
cornholio7 Posted March 18, 2006 Posted March 18, 2006 http://forum.imgburn.com/index.php?showtopic=697
Movie Junkie Posted March 18, 2006 Posted March 18, 2006 http://forum.imgburn.com/index.php?showtopic=697Thanks Corny. WOW, talk about being bad. It's a good thing their DVD+R DL discs aren't like that.
lbouchard Posted March 20, 2006 Author Posted March 20, 2006 Sorry, but I really belive the problem is not related to the "cheap" memorex disc (RITEK-D01-01) vs the "better " Verbatim disc. after a couple more coaster, the problem is always in the swtich between layer 0 and layer 1 of the disc. This makes me think that the problem is relate to the way ImgBurn do its job. maybe image burn tries to burn more sectors on layer 0 than there is on the disc... is that possible?
polopony Posted March 20, 2006 Posted March 20, 2006 believe what you want, you complain of bad burns and you're using what amounts to shit media .Verbatim is the ONLY manufacturer of dual layer discs that work time and time again .You came here looking for advice which you dont seem to care for, try creating the ISO with PGC edit and get some decent media, yeah that means Verbatim DLs good luck PS we dont discuss ripping with DVDD as it was the reason for its demise and legal troubles for LUK
Movie Junkie Posted March 20, 2006 Posted March 20, 2006 Sorry, but I really belive the problem is not related to the "cheap" memorex disc (RITEK-D01-01) vs the "better " Verbatim disc. after a couple more coaster, the problem is always in the swtich between layer 0 and layer 1 of the disc. This makes me think that the problem is relate to the way ImgBurn do its job. maybe image burn tries to burn more sectors on layer 0 than there is on the disc... is that possible? I don't want to sound harsh but don't ask for our help if you don't want to consider our suggestions. Believe whatever you want but the fact is that ANY DL MEDIA EXCEPT FOR VERBATIM DVD+R DL IS NOTHING BUT JUNK! ImgBurn is not the problem.
LIGHTNING UK! Posted March 20, 2006 Posted March 20, 2006 The switch occurs exactly as you issue the last write on L0 / first on L1. You log shows the failure to be a few write commands into writing L1. Ritek DL burns always show massive parity error spikes at the layer switch point, that's why people avoid them like the plague. It's just too hard for your drive to cope with the switch and so it's erroring out.
Movie Junkie Posted March 21, 2006 Posted March 21, 2006 That may not stop the one's that believe it's not the media. According to them it has to be anything and everything except the discs. I guess they think all of us has stock in Verbatim and TY so that's why we suggest they purchase those discs.
volvofl10 Posted March 22, 2006 Posted March 22, 2006 this isnt a forum where we dictate to people or talk down to them , as most of us knew very little once over about dvd. ( and some of us still dont ) its purely a help/support place. hence most replies are based on members experiences, especially when it comes to media and brands and dyes. what has appeare in ehre and the previous place was the unsuitability of ritek dual layer media, which most times was rectified by changing to verbatim , which is probably why most of the replies are suggesting to change over .
Movie Junkie Posted March 22, 2006 Posted March 22, 2006 I remember my first time on the previous place. I had a problem which I posted about. All of the suggestions were to use different media (I was using Maxell DVD-R which was made by Ritek). I had always believed in the Maxell brand since I had used cassettes, 3.5 and 5.25 disks, video tape and zip disks and never had problems. I had no idea at the time if the suggestions were right or wrong but I changed brands to Verbatim and the problems went away. From that point on I have only used Verbs.
lfcrule1972 Posted March 22, 2006 Posted March 22, 2006 We can only make suggestions based on the information given - when you see Ritek DL I always think poor DL media. When I see CMC MAG as a media ID I think there could be problems.....
lbouchard Posted March 23, 2006 Author Posted March 23, 2006 Wow... thanks for the feedback. At first I did not believe the tone of the people I was writing advice to me? I found it very disappointing that in 2006 we can still buy crappy media from the big manufacturers. I have found not so cheap Verbatim DVD+R DL at ncix.com 10-pak for $35.16 CAD http://search.ncix.com/displayproductdetail.php?sku=11883B22 The Memorex DVD+R DL cost $29.99 CAD for 15-pak spindle. but like you said, if they can't do the job then the cost is not important!!! I will try the Verbatim media and I will let you know the result. Thanks for the feedback.
Movie Junkie Posted March 23, 2006 Posted March 23, 2006 Good luck. Be sure to let us know how things go.
Recommended Posts