pilgrim Posted July 27, 2009 Posted July 27, 2009 This may - or may not - be related to the SPTD warning, but I doubt it. In the past week, I'm suddenly unable to burn DVDs at >2.7s on a pioneer 115D that until then was quite happy writing at 16-18x . Same media, from the same spindle. It takes up to 25mins to burn a DVD-R, seemingly the system isnt sending data to the device fast enough as imgburn shows the device buffer emptying... Any ideas where to even start troubleshooting this. DaemonTools is installed, but has been for since the system was built (its a stock option on my nlite install). Cant think of anythign that has been installed, or even updated). OS is XP64, 6GB RAM, and has worked just fine. Until now. Sample from the log I 21:07:01 Destination Device: [0:0:0] PIONEER DVD-RW DVR-115D 1.18 (G:) (ATA) I 21:07:01 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x) I 21:07:01 Destination Media Sectors: 2,297,888 I 21:07:01 Write Mode: DVD I 21:07:01 Write Type: DAO I 21:07:01 Write Speed: MAX I 21:07:01 Link Size: Auto I 21:07:01 Lock Volume: Yes I 21:07:01 Test Mode: No I 21:07:01 OPC: Yes I 21:07:01 BURN-Proof: Enabled I 21:07:03 Advanced Settings - Optimal Writing Speed: No I 21:07:20 Filling Buffer... (128 MB) I 21:07:22 Writing LeadIn... I 21:07:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294381) I 21:07:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294381) I 21:31:30 Synchronising Cache... I 21:31:37 Operation Successfully Completed! - Duration: 00:24:36 I 21:31:37 Average Write Rate: 3,197 KB/s (2.3x) - Maximum Write Rate: 3,940 KB/s (2.8x)
LIGHTNING UK! Posted July 27, 2009 Posted July 27, 2009 Sounds like it might be DMA related. Uninstall the controller as per the DMA post in the FAQ.
Recommended Posts