Burned disk plays fine in iTunes and WMP but not in my CD players

[burnselk]

The music CD I burned using ImgBurn plays the burned music just fine on my computer but nothing but "white noise" comes out of the speakers when I try to play the burned CD on my two CD players.

 

I used a new Maxell CD-R 80 min/700 MB disk.

[LIGHTNING UK!]

Post the log of the burn.

[burnselk]

Post the log of the burn.

 

; //****************************************\\

; ImgBurn Version 2.5.0.0 - Log

; Tuesday, 28 July 2009, 09:46:58

; \\****************************************//

;

;

I 09:44:30 ImgBurn Version 2.5.0.0 started!

I 09:44:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 09:44:31 Total Physical Memory: 3,406,252 KB - Available: 2,637,560 KB

I 09:44:31 Initialising SPTI...

I 09:44:31 Searching for SCSI / ATAPI devices...

I 09:44:31 Found 1 DVD

[Cynthia]

I 09:33:04 Source Media Type: CD-ROM (Speeds: 203.1x)

That log is not from the burn - it's from the read.

[burnselk]

I 09:33:04 Source Media Type: CD-ROM (Speeds: 203.1x)

That log is not from the burn - it's from the read.

 

That's the only log I could find. I guess the "burn" process didn't take place wonder why? I was not given the option to burn......as I recall.

 

I'll have to try it once again.........is there a step I'm missing?

[Cynthia]

You need to use the write mode and load the M:\Image.bin file.

[burnselk]

You need to use the write mode and load the M:\Image.bin file.

 

Cynthia, could you explain how I "load the M:\Image.bin file".

 

I appreciate your assistance greatly. I do want to learn how to use the ImgBurn.

[mmalves]

This guide from the Guides section should get you started