burnselk Posted July 28, 2009 Share Posted July 28, 2009 The music CD I burned using ImgBurn plays the burned music just fine on my computer but nothing but "white noise" comes out of the speakers when I try to play the burned CD on my two CD players. I used a new Maxell CD-R 80 min/700 MB disk. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 28, 2009 Share Posted July 28, 2009 Post the log of the burn. Link to comment Share on other sites More sharing options...
burnselk Posted July 28, 2009 Author Share Posted July 28, 2009 Post the log of the burn. ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Tuesday, 28 July 2009, 09:46:58 ; \\****************************************// ; ; I 09:44:30 ImgBurn Version 2.5.0.0 started! I 09:44:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 09:44:31 Total Physical Memory: 3,406,252 KB - Available: 2,637,560 KB I 09:44:31 Initialising SPTI... I 09:44:31 Searching for SCSI / ATAPI devices... I 09:44:31 Found 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted July 28, 2009 Share Posted July 28, 2009 I 09:33:04 Source Media Type: CD-ROM (Speeds: 203.1x) That log is not from the burn - it's from the read. Link to comment Share on other sites More sharing options...
burnselk Posted August 11, 2009 Author Share Posted August 11, 2009 I 09:33:04 Source Media Type: CD-ROM (Speeds: 203.1x) That log is not from the burn - it's from the read. That's the only log I could find. I guess the "burn" process didn't take place wonder why? I was not given the option to burn......as I recall. I'll have to try it once again.........is there a step I'm missing? Link to comment Share on other sites More sharing options...
Cynthia Posted August 11, 2009 Share Posted August 11, 2009 You need to use the write mode and load the M:\Image.bin file. Link to comment Share on other sites More sharing options...
burnselk Posted August 11, 2009 Author Share Posted August 11, 2009 You need to use the write mode and load the M:\Image.bin file. Cynthia, could you explain how I "load the M:\Image.bin file". I appreciate your assistance greatly. I do want to learn how to use the ImgBurn. Link to comment Share on other sites More sharing options...
mmalves Posted August 11, 2009 Share Posted August 11, 2009 This guide from the Guides section should get you started Link to comment Share on other sites More sharing options...
Recommended Posts