wartorn Posted July 28, 2009 Share Posted July 28, 2009 I have to drives in my computer a BENQ which is not DL and a LG GH22LS30(which is DL) when i start imgburn and go to select the destination it only shows the BENQ, not the lg? I 12:17:22 ImgBurn Version 2.5.0.0 started! I 12:17:22 Microsoft Windows Vista Business x64 Edition (6.0, Build 6001 : Service Pack 1) I 12:17:22 Total Physical Memory: 4,192,724 KB - Available: 3,038,308 KB W 12:17:22 SPTD can have a detrimental effect on drive performance. I 12:17:22 Initialising SPTI... I 12:17:22 Searching for SCSI / ATAPI devices... I 12:17:23 Found 1 DVD-ROM and 1 DVD+RW! Ideas as to why its not showing up? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 28, 2009 Share Posted July 28, 2009 Look in device manager, does it show up? Any yellow warning triangle by it? Check the cables to the drive / mothetboard / psu Link to comment Share on other sites More sharing options...
wartorn Posted July 28, 2009 Author Share Posted July 28, 2009 (edited) Look in device manager, does it show up? Any yellow warning triangle by it? Check the cables to the drive / mothetboard / psu it shows up in both my computer and device manager, should there be a sata plugged into it? Edited July 28, 2009 by wartorn Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 28, 2009 Share Posted July 28, 2009 That's odd then. Try going into the setting and changing the enumeration option on the I/O tab. EDIT: Yes, the drive should have 2 cables going into it. 1 for power and 1 for data. Link to comment Share on other sites More sharing options...
wartorn Posted July 28, 2009 Author Share Posted July 28, 2009 That's odd then. Try going into the setting and changing the enumeration option on the I/O tab. What??? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 28, 2009 Share Posted July 28, 2009 Tools -> Settings -> I/O -> SPTI enumeration method. It makes more sense if you actually try doing it - and assuming you know where to find the 'settings' in the first place. Link to comment Share on other sites More sharing options...
wartorn Posted July 28, 2009 Author Share Posted July 28, 2009 (edited) Tools -> Settings -> I/O -> SPTI enumeration method. It makes more sense if you actually try doing it - and assuming you know where to find the 'settings' in the first place. Im in settings and I/O but i do not see SPTI enumeration method Edited July 28, 2009 by wartorn Link to comment Share on other sites More sharing options...
Cynthia Posted July 28, 2009 Share Posted July 28, 2009 Not sure about your previous posted image - but here is that setting: Main Menu -> Tools -> Settings -> I/O -> SPTI enumeration method. Link to comment Share on other sites More sharing options...
wartorn Posted July 28, 2009 Author Share Posted July 28, 2009 which one? Link to comment Share on other sites More sharing options...
Cynthia Posted July 28, 2009 Share Posted July 28, 2009 Device Interface is the default for Vista. Try with Device Class first and then restart ImgBurn - if that doesn't help - try with Drive Letter. Link to comment Share on other sites More sharing options...
wartorn Posted July 28, 2009 Author Share Posted July 28, 2009 Device Interface is the default for Vista. Try with Device Class first and then restart ImgBurn - if that doesn't help - try with Drive Letter. nope didnt work Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 28, 2009 Share Posted July 28, 2009 If none of them work then there's something wrong with your OS config. I'd probably uninstall the IDE controller from within Device manager (the drives section should then be empty - except for a virtual driver perhaps). Then reboot your PC and let it detect them again. Link to comment Share on other sites More sharing options...
Recommended Posts