Real Keith Posted August 12, 2009 Share Posted August 12, 2009 I have made a recording of an audio drama which I wish to burn to CD. I have been assigned an International Standard Recording Code (ISRC) which I need to put on the CD. I believe I do this when creating a cue sheet, but I can't see an option for this on the "Create CUE File" screen of Imgburn. I have read about creating a cue sheet in Windows Notepad (so it's plain text) but I haven't found out how I would, or if I could, use Imgburn to put this information on a CD. I have read posts on forums where people show cue sheets for CDs they are trying to copy with Imgburn which include an ISRC for each track, but nothing about putting these codes on new recordings. Please can anyone help? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 13, 2009 Share Posted August 13, 2009 open the cue file in notepad and add 'ISRC (number)' under the track entries. ie TRACK 01 xxxx xxxx ISRC xxxxx INDEX 01 xxxxxx TRACK 02 xxxx xxxx ISRC xxxx etc. Load your new CUE Write mode and click the Image Information to check it's all present and correct before burning. Link to comment Share on other sites More sharing options...
Real Keith Posted August 13, 2009 Author Share Posted August 13, 2009 Thanks Link to comment Share on other sites More sharing options...
Real Keith Posted August 14, 2009 Author Share Posted August 14, 2009 I've tried this now and it worked. Created cue file in Imgburn, saved it, opened it with Notepad, added lines for ISRC with my codes, used cue file to write cd. I checked it by making an image file from the cd I'd just burned, then opening the .cue file created with notepad, and the ISRCs were there. All good in the proverbial hood. Thanks again to Lightning UK Link to comment Share on other sites More sharing options...
Recommended Posts