hackle Posted August 30, 2009 Share Posted August 30, 2009 (edited) i have made about 150 dvd with image burn from iso. Now all of asudden it wont let me burn anymore. Tried 3 different drives 1 is a brand new bue ray burner andy help would be great. I 14:01:21 ImgBurn Version 2.5.0.0 started! I 14:01:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:01:21 Total Physical Memory: 1,571,248 KB - Available: 1,053,224 KB I 14:01:21 Initialising SPTI... I 14:01:21 Searching for SCSI / ATAPI devices... I 14:01:28 Found 1 DVD-ROM and 1 DVD Edited August 30, 2009 by hackle Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 30, 2009 Share Posted August 30, 2009 Are all three giving you the same error? It would help if you provided logs from all of them. Do you have any decent discs you can test with (Taiyo Yuden or Verbatim) ? Link to comment Share on other sites More sharing options...
hackle Posted August 30, 2009 Author Share Posted August 30, 2009 Are all three giving you the same error? It would help if you provided logs from all of them. Do you have any decent discs you can test with (Taiyo Yuden or Verbatim) ? I have burnt them on sony vertaim magnavox memorex. They all worked fine until today as i said i have made 150 wii iso burns and they all work great. This is a new problem that just came up today. I will post the log file from the other 2 later for you. I have also installed the program and moved the dvd log posted here to another computer and i get the same error. The only differents from the last 150 disks to this is i went back to using xp instead of vista. Link to comment Share on other sites More sharing options...
hackle Posted August 30, 2009 Author Share Posted August 30, 2009 Are all three giving you the same error? It would help if you provided logs from all of them. Do you have any decent discs you can test with (Taiyo Yuden or Verbatim) ? I have burnt them on sony vertaim magnavox memorex. They all worked fine until today as i said i have made 150 wii iso burns and they all work great. This is a new problem that just came up today. I will post the log file from the other 2 later for you. I have also installed the program and moved the dvd log posted here to another computer and i get the same error. The only differents from the last 150 disks to this is i went back to using xp instead of vista. Ok here are the other 2 burn logs bd drive I 14:55:49 ImgBurn Version 2.4.4.0 started! I 14:55:49 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:55:49 Total Physical Memory: 3,799,276 KB - Available: 3,175,940 KB I 14:55:49 Initialising SPTI... I 14:55:49 Searching for SCSI / ATAPI devices... I 14:55:49 Found 1 DVD-ROM, 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted August 30, 2009 Share Posted August 30, 2009 I 14:56:14 Destination Device: [2:0:0] ATAPI BD B DH4B1S 7P5B (H:) (ATA)W 15:01:24 Failed to Write Sectors 762432 - 762463 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) (...) I 15:14:55 Destination Device: [3:1:0] HP DVD Writer 640c JS04 (J:) (ATA) I 15:14:55 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 2.4x, 4x, 8x) W 15:15:29 Failed to Write Sectors 0 - 31 - Reason: Write Error The DH4B1S burner is having communication problems: look for updated drivers for the motherboard's chipset or SATA controller where the drive is connected to. You might also want to try another SATA cable too. If it still gives this error try what this post from the FAQ says. As for the HP burner it doesn't seem to properly support that media (e.g. 2.4x isn't a valid speed for the DVD-R standard). Try this firmware update to see if it helps. You could also try burning at 4x or 8x and maybe running a lens cleaning disc on that drive. Media that doesn't work on three quite different burners tells us a lot about its quality, doesn't it? Link to comment Share on other sites More sharing options...
hackle Posted August 31, 2009 Author Share Posted August 31, 2009 (edited) I 14:56:14 Destination Device: [2:0:0] ATAPI BD B DH4B1S 7P5B (H:) (ATA)W 15:01:24 Failed to Write Sectors 762432 - 762463 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) (...) I 15:14:55 Destination Device: [3:1:0] HP DVD Writer 640c JS04 (J:) (ATA) I 15:14:55 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 2.4x, 4x, 8x) W 15:15:29 Failed to Write Sectors 0 - 31 - Reason: Write Error The DH4B1S burner is having communication problems: look for updated drivers for the motherboard's chipset or SATA controller where the drive is connected to. You might also want to try another SATA cable too. If it still gives this error try what this post from the FAQ says. As for the HP burner it doesn't seem to properly support that media (e.g. 2.4x isn't a valid speed for the DVD-R standard). Try this firmware update to see if it helps. You could also try burning at 4x or 8x and maybe running a lens cleaning disc on that drive. Media that doesn't work on three quite different burners tells us a lot about its quality, doesn't it? Ok everybody thanks for all your help. But i was able to get it burning again. Just want to let everybody know how this all started. I was using vista to burn my wii iso was able to burn on 3 different dvd burners 150 different iso on many different kinds of media from no name media to high end. I purchased a blu-ray burner and visted would not see it so i went back to xp and that where all my troubled started. could not burn on three different burners. so i put my old no name burner in and i was able to burn on that drive again (see log below). So that got me thinking the problem must be between xp sp3 and imgburn. So i stuck my blu-ray, my liteon and my hp burner in a xp machine that only has xp sp2 on it and all three burners worked again. So i then put them in a vista sp2 machine and and 2 of the 3 worked the blu-ray burner would not. So i hope this little test on mine helps someone out there because i know i was very frustated that everything stopped working. log file from no name burner I 18:37:59 ImgBurn Version 2.4.4.0 started! I 18:37:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 18:37:59 Total Physical Memory: 3,799,276 KB - Available: 3,361,304 KB I 18:37:59 Initialising SPTI... I 18:37:59 Searching for SCSI / ATAPI devices... I 18:37:59 Found 2 DVD Edited August 31, 2009 by hackle Link to comment Share on other sites More sharing options...
Recommended Posts