Fast&Furious Posted September 3, 2009 Posted September 3, 2009 --------------------------- ImgBurn --------------------------- I/O Error! Device: [1:0:0] HL-DT-ST DVD-RAM GH22LP20 1.03 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10) - Sectors: 0 - 31 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 Interpretation: Invalid Address For Write --------------------------- Retry Cancel --------------------------- W 14:07:50 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 14:07:50 Initialising SPTI... I 14:07:50 Searching for SCSI / ATAPI devices... I 14:07:50 Found 1 DVD
mmalves Posted September 3, 2009 Posted September 3, 2009 I 14:13:33 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GH22LP20 1.03 (D:) (ATA)I 14:13:33 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning at 6x or 4x. If all that doesn't help then read this -> http://forum.imgburn.com/index.php?showtopic=8000
Fast&Furious Posted September 4, 2009 Author Posted September 4, 2009 Ok, so i updated it and everything and this pops up. --------------------------- ImgBurn --------------------------- I/O Error! Device: [1:0:0] HL-DT-ST DVD-RAM GH22LP20 1.04 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10) - Sectors: 0 - 31 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 Interpretation: Invalid Address For Write --------------------------- Retry Cancel --------------------------- Pleasee help ~!
LIGHTNING UK! Posted September 4, 2009 Posted September 4, 2009 Please don't post the error box like that, post the log because it's FAR more useful.
Fast&Furious Posted September 4, 2009 Author Posted September 4, 2009 i used x4 speed. I 14:41:16 ImgBurn Version 2.5.0.0 started! I 14:41:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:41:16 Total Physical Memory: 1,015,284 KB - Available: 421,672 KB W 14:41:16 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 14:41:16 Initialising SPTI... I 14:41:16 Searching for SCSI / ATAPI devices... I 14:41:16 Found 1 DVD
Cynthia Posted September 4, 2009 Posted September 4, 2009 You used 4x speed also in your first post. 6x and 8x are the others to try.
LIGHTNING UK! Posted September 4, 2009 Posted September 4, 2009 I 14:41:36 Destination Media Sectors: 3,827,520 That disc wasn't blank/empty/new.
Recommended Posts