dabas Posted September 5, 2009 Share Posted September 5, 2009 Hi, Please find below the Log from the ImgBurn and pls advise what went wrong. Pls. help me to make a perfect copy of DVD9 with perfect layer break which can be played on standalone DVD Players. Do i have to do some software setting or upgrade my hardware. I am using Intel Core 2 Duo E4500 @2.20Ghz Processor with 1 GB RAM PLEASE HELP............ ******************************************************************* Here is my log of ImgBurn ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Friday, 04 September 2009, 21:21:07 ; \\****************************************// ; ; I 19:51:22 ImgBurn Version 2.5.0.0 started! I 19:51:22 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 19:51:22 Total Physical Memory: 1,039,660 KB - Available: 351,236 KB I 19:51:22 Initialising SPTI... I 19:51:22 Searching for SCSI / ATAPI devices... I 19:51:22 Found 1 DVD ImgBurn.txt Link to comment Share on other sites More sharing options...
mmalves Posted September 5, 2009 Share Posted September 5, 2009 I 19:57:50 Destination Device: [1:1:0] TSSTcorp CDDVDW TS-H653N 0208 (I:) (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. Also check the fragmentation of your D: drive and avoid using the computer while burning. Link to comment Share on other sites More sharing options...
dabas Posted September 5, 2009 Author Share Posted September 5, 2009 Hi mmalves, Thanks for your quick response....... :) I tried to update the firmware of the DVD Writer as suggested by you but i got the following errors :- Link to comment Share on other sites More sharing options...
Cynthia Posted September 5, 2009 Share Posted September 5, 2009 Is it a Dell/HP/Compaq computer? If so - try to find the firmware on their pages. Link to comment Share on other sites More sharing options...
dabas Posted September 5, 2009 Author Share Posted September 5, 2009 Hi, I am still not able to burn the DVD Dual Layer 8.5 GB. I am using Verbatim 8x DVD+R DL 8.5GB. Here is the log of my ImgBurn :- ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Saturday, 05 September 2009, 22:43:17 ; \\****************************************// ; ; I 22:11:21 ImgBurn Version 2.5.0.0 started! I 22:11:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 22:11:21 Total Physical Memory: 1,039,660 KB - Available: 409,284 KB I 22:11:21 Initialising SPTI... I 22:11:21 Searching for SCSI / ATAPI devices... I 22:11:21 Found 1 DVD Link to comment Share on other sites More sharing options...
dabas Posted September 5, 2009 Author Share Posted September 5, 2009 I am using Compaq Intel Core 2 Duo Desktop Model :- SR5250IL, Product Name :- GT701AA-ACJ Link to comment Share on other sites More sharing options...
mmalves Posted September 5, 2009 Share Posted September 5, 2009 Which firmware update have you tried? Link to comment Share on other sites More sharing options...
Cynthia Posted September 5, 2009 Share Posted September 5, 2009 Which firmware update have you tried? Most certainly the one you posted in post #2 for the original version of that model. Try this page. There is an autodetect update function. http://welcome.hp.com/country/us/en/support.html Link to comment Share on other sites More sharing options...
Cynthia Posted September 5, 2009 Share Posted September 5, 2009 Perhaps time to get a good external USB burner. If your current one can't burn the best discs on the market - I see a dark future for it. Might be worth to try to clean the laser head with a cleaning disc first. Link to comment Share on other sites More sharing options...
mmalves Posted September 5, 2009 Share Posted September 5, 2009 I would also try crossflashing it to its real SH-S203N model. Link to comment Share on other sites More sharing options...
dabas Posted September 6, 2009 Author Share Posted September 6, 2009 I can burn the both DVD 4.7GB and DVD 8.5GB using Nero sucessfully, but it has Layer break problem. I can also successfully burn DVD9 with the help of softwares like CloneDVD, DVDFab etc, but they also have Layer break problem. I am only facing DVD Burning problem with DVD Decrypter and ImgBurn only........ Link to comment Share on other sites More sharing options...
dabas Posted September 6, 2009 Author Share Posted September 6, 2009 (edited) Which firmware update have you tried? Most certainly the one you posted in post #2 for the original version of that model. Try this page. There is an autodetect update function. http://welcome.hp.com/country/us/en/support.html I tried to get updates from the HP site suggested by your goodself, but it has the firmware updates for Windows Vista only, whereas i am using Windows XP SP3. Edited September 6, 2009 by dabas Link to comment Share on other sites More sharing options...
mmalves Posted September 6, 2009 Share Posted September 6, 2009 Just to be sure: this firmware update doesn't work? Link to comment Share on other sites More sharing options...
Cynthia Posted September 6, 2009 Share Posted September 6, 2009 A firmware flasher that works in Vista should work also for XP. Link to comment Share on other sites More sharing options...
dabas Posted September 7, 2009 Author Share Posted September 7, 2009 Just to be sure: this firmware update doesn't work? Just tried to update as directed by you and got this error message :- I can burn the both DVD 4.7GB and DVD 8.5GB using Nero sucessfully, but it has Layer break problem. I can also successfully burn DVD9 with the help of softwares like CloneDVD, DVDFab etc, but they also have Layer break problem. I am only facing DVD Burning problem with DVD Decrypter and ImgBurn only........ Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 7, 2009 Share Posted September 7, 2009 There's no reason what-so-ever that if you use the same drive, same media and the same write speed that all programs wouldn't produce identical results. All the program does is feed data to the drive. It has no control over the burn quality, or even if the burn is successful at all really. A 'write error' in one should be a 'write error' in another. Link to comment Share on other sites More sharing options...
Recommended Posts