tbridge256 Posted September 9, 2009 Posted September 9, 2009 Everytime i burn a ISO image to a dvr dl disc. it finishes just fine but when i go to play it it just reads as a dvd. can anyone help me with this? my 360 has been flashed and i got 1 burnt game to work. it was one that did not have a dvd file with it though it was the iso alone. Please can some1 help me?
LIGHTNING UK! Posted September 9, 2009 Posted September 9, 2009 Provide a log file from you burning + verifying the image please. (like it says to do in the pink bit up the top )
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 Provide a log file from you burning + verifying the image please. (like it says to do in the pink bit up the top ) I 17:09:00 ImgBurn Version 2.5.0.0 started! I 17:09:00 Microsoft Windows 7 Ultimate Edition (6.1, Build 7100) I 17:09:00 Total Physical Memory: 3,145,144 KB - Available: 1,975,764 KB I 17:09:00 Initialising SPTI... I 17:09:00 Searching for SCSI / ATAPI devices... I 17:09:06 Found 1 DVD
Cynthia Posted September 9, 2009 Posted September 9, 2009 Did it verify ok? The last part is either missing or not.
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 I 17:46:33 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 17:46:33 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 17:46:33 Verifying Layer 0... (LBA: 0 - 1913759) I 17:52:16 Verifying Layer 1... (LBA: 1913760 - 3827487) I 17:57:58 Exporting Graph Data... I 17:57:58 Graph Data File: C:\Users\Rex\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH16A6S_YA17_THURSDAY-JANUARY-08-2004_5-20_PM_RITEK-S04-66_2.4x.ibg I 17:57:58 Export Successfully Completed! I 17:57:58 Operation Successfully Completed! - Duration: 00:11:24 I 17:57:58 Average Verify Rate: 11,191 KB/s (8.1x) - Maximum Verify Rate: 16,094 KB/s (11.6x) I 18:11:27 Close Request Acknowledged I 18:11:27 Closing Down... I 18:11:27 Shutting down SPTI... I 18:11:27 ImgBurn closed! Â sorry i tought i had it all copied my mistake.
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 i have successfully burned and played gears of war 2 but it only had the 1 iso. i've tried burning 2 games now with the iso and dvd image and this happened every time and i keep wasting these discs im downt to 4 left
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 Did it verify ok? The last part is either missing or not. but yea i think it verified ok
Cynthia Posted September 9, 2009 Posted September 9, 2009 I'm not a gamer so I have no clue how vital it is that the burned DVD is book typed to a DVD-ROM. Â I 17:20:59 Book Type Setting: N/AI 17:46:33 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I guess other members can fill in.
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 I'm not a gamer so I have no clue how vital it is that the burned DVD is book typed to a DVD-ROM. I 17:20:59 Book Type Setting: N/AI 17:46:33 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I guess other members can fill in. Could it be that i burnt the game at 2.4x speed and not 4x 6x or 8x? i thought the slower u burnt it the better but i didnt see that you need to write at a certian speed for certain dvdr's.
Cynthia Posted September 9, 2009 Posted September 9, 2009 2.4x burning speed is impossible to get. The lowest you can get is 4x. Â I 17:46:08 Average Write Rate: 5,402 KB/s (3.9x) - Maximum Write Rate: 5,572 KB/s (4.0x) Slower is not always the best. It depends on the combination of media and burner.
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 2.4x burning speed is impossible to get. The lowest you can get is 4x. Â I 17:46:08 Average Write Rate: 5,402 KB/s (3.9x) - Maximum Write Rate: 5,572 KB/s (4.0x) Slower is not always the best. It depends on the combination of media and burner. why is there a 2.4x setting on image burn? is it not actually writing on 2.4x when that is selected or something?
Movie Junkie Posted September 9, 2009 Posted September 9, 2009 I'm not a gamer so I have no clue how vital it is that the burned DVD is book typed to a DVD-ROM. I 17:20:59 Book Type Setting: N/AI 17:46:33 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I guess other members can fill in. Could it be that i burnt the game at 2.4x speed and not 4x 6x or 8x? i thought the slower u burnt it the better but i didnt see that you need to write at a certian speed for certain dvdr's. I see several possible problems.  1. You're not setting the Book Type to DVD-ROM  2. The only DL disc you should use is Verbatim (the ones made in Singapore).  3. The discs you are using don't show a 2.4x write speed. You are actually burning at 4x.  While I don't burn any game discs (only movies) I believe that what I've mentioned applies to what you are doing as well as to what I'm doing.
Movie Junkie Posted September 9, 2009 Posted September 9, 2009 2.4x burning speed is impossible to get. The lowest you can get is 4x. Â I 17:46:08 Average Write Rate: 5,402 KB/s (3.9x) - Maximum Write Rate: 5,572 KB/s (4.0x) Slower is not always the best. It depends on the combination of media and burner. why is there a 2.4x setting on image burn? is it not actually writing on 2.4x when that is selected or something? Some discs allow you to burn at 2.4x. Â There is a difference of opinion as to whether slower is better but I can tell you from personal experience that I have burned quite a few DL discs (all Verbatim) at 2.4x, and I have never had a bad burn. I also have never had a bad burn on my 52x CD's (also Verbatim) that I have burned at 4x. Add to that the large number of 8x Max DVD5 discs, burned at 4x and the 16x Max discs, burned at 6x (yep, all Verbatim) with only 2 or 3 bad burns (all on the 8x Max discs). You can see, from my experiences, that burning slowly works exceedingly well.
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 I'm not a gamer so I have no clue how vital it is that the burned DVD is book typed to a DVD-ROM. I 17:20:59 Book Type Setting: N/AI 17:46:33 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I guess other members can fill in. Could it be that i burnt the game at 2.4x speed and not 4x 6x or 8x? i thought the slower u burnt it the better but i didnt see that you need to write at a certian speed for certain dvdr's. I see several possible problems.  1. You're not setting the Book Type to DVD-ROM  2. The only DL disc you should use is Verbatim (the ones made in Singapore).  3. The discs you are using don't show a 2.4x write speed. You are actually burning at 4x.  While I don't burn any game discs (only movies) I believe that what I've mentioned applies to what you are doing as well as to what I'm doing. i have successfully burned 1 game already on these discs so i dont think that is the problem
Movie Junkie Posted September 9, 2009 Posted September 9, 2009 i have successfully burned 1 game already on these discs so i dont think that is the problem Successfully burning 1 game only means you've gotten lucky. Look at it this way, you've unsuccessfully burned more than 1 game. That should tell you something. You have probably made more coasters in your few burns than I have made in thousands of burns. Â You don't have to take my word if you don't want to but just search around this forum, as well as other forums, and you'll find other knowledgeable people who say the same thing. Â Your drive appears to be a Lite-on OEM drive. You could see if there is an update to the firmware for it. If you find an update use it to flash your drive. This won't change the fact that you should use Verbatim discs but you should always try to keep the firmware updated.
LIGHTNING UK! Posted September 9, 2009 Posted September 9, 2009 Who flashed your xbox, how long ago and have you spoken to them about it?
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 Who flashed your xbox, how long ago and have you spoken to them about it? i flashed it about a month ago
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 Who flashed your xbox, how long ago and have you spoken to them about it? i flashed it about a month ago do u think i need to reflash with a newer firmware?
LIGHTNING UK! Posted September 9, 2009 Posted September 9, 2009 If there's a newer version, yes. If not, no! Â Same as anything really.
tbridge256 Posted September 9, 2009 Author Posted September 9, 2009 If there's a newer version, yes. If not, no! Same as anything really. when i flashed i used ver 1.4 now there is a version 1.6 . that makes sence cause the games im trying to burn are brand new games. u think maybe i should update my dvd burner firmware also?
Movie Junkie Posted September 9, 2009 Posted September 9, 2009 That's all folks. I'm done with this thread.
spinningwheel Posted September 9, 2009 Posted September 9, 2009 That's all folks. I'm done with this thread.
Movie Junkie Posted September 9, 2009 Posted September 9, 2009 That's all folks. I'm done with this thread. To paraphrase an old saying "You Can Show Someone a Solution, But You Can't Make Them Think".
Recommended Posts