TheDarkStranger2009 Posted September 27, 2009 Posted September 27, 2009 I tried burning a DVD on HP Invent disk DVD+R 8x 4.7 gig disk. I have just installed Windows 7 RTM and imgburn 2.5.0.0. Wasted 3 DVD's so far because of this error. I have copied below the error screen snapshot, the burn properties and log too. log copied here & below: http://www.filedropper.com/imgburn +++++++++++++START LOG+++++++++++++++ +++++++++++++++++++++++++++++++++++ I 15:30:41 Operation Started! I 15:30:41 Building Image Tree... I 15:30:44 Checking Directory Depth... I 15:30:44 Calculating Totals... I 15:30:44 Preparing Image... I 15:30:44 Checking Path Length... I 15:30:44 Contents: 12 Files, 0 Folders I 15:30:44 Content Type: DivX Video I 15:30:44 Data Type: MODE1/2048 I 15:30:44 File System(s): ISO9660, Joliet I 15:30:44 Volume Label: Dexter.Season01 I 15:30:44 Size: 4,397,084,672 bytes I 15:30:44 Sectors: 2,147,014 I 15:30:44 Image Size: 4,397,137,920 bytes I 15:30:44 Image Sectors: 2,147,040 I 15:30:46 Operation Successfully Completed! - Duration: 00:00:04 I 15:30:46 Operation Started! I 15:30:46 Source File: -==/\/[bUILD IMAGE]\/\==- I 15:30:46 Source File Sectors: 2,147,040 (MODE1/2048) I 15:30:46 Source File Size: 4,397,137,920 bytes I 15:30:46 Source File Volume Identifier: Dexter.Season01 I 15:30:46 Source File Application Identifier: ImgBurn v2.5.0.0 - The Ultimate Image Burner! I 15:30:46 Source File Implementation Identifier: ImgBurn v2.5.0.0 I 15:30:46 Source File File System(s): ISO9660, Joliet I 15:30:46 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-842 RB01 (E:) (ATA) I 15:30:46 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 2.4x, 4x, 6x, 8x) I 15:30:46 Destination Media Sectors: 2,295,104 I 15:30:46 Write Mode: DVD I 15:30:46 Write Type: DAO I 15:30:46 Write Speed: MAX I 15:30:46 DVD+R Reserve Track: No I 15:30:46 Link Size: Auto I 15:30:46 Lock Volume: Yes I 15:30:46 Test Mode: No I 15:30:46 OPC: No I 15:30:46 BURN-Proof: Enabled I 15:30:46 Filling Buffer... (40 MB) I 15:30:47 Writing LeadIn... W 15:31:19 Failed to Write Sectors 768 - 799 - Reason: Power Calibration Area Error W 15:31:19 Retrying (1 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (2 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (3 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (4 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (5 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (6 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (7 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (8 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (9 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (10 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (11 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (12 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (13 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (14 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (15 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (16 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (17 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (18 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (19 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error W 15:31:19 Retrying (20 of 20)... W 15:31:19 Retry Failed - Reason: Power Calibration Area Error E 15:32:34 Failed to Write Sectors 768 - 799 - Reason: Power Calibration Area Error I 15:32:34 Synchronising Cache... W 15:32:37 User opted to skip the 'Close Track/Session/Disc' functions. E 15:32:37 Failed to Write Image! E 15:32:37 Operation Failed! - Duration: 00:01:51 I 15:32:37 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) +++++++++++++END LOG+++++++++++++++ +++++++++++++++++++++++++++++++++++
Cynthia Posted September 27, 2009 Posted September 27, 2009 Hi and welcome to the forum, TheDarkStranger2009! Sounds as your burner doesn't like the (media code) Disc ID: CMC MAG-E01-00 code very well. Have you tried another burn speed such as 4x? A cleaning disc could perhaps help. Other than that, I suggest you try with another brand of discs/media code.
TheDarkStranger2009 Posted September 27, 2009 Author Posted September 27, 2009 Hi and welcome to the forum, TheDarkStranger2009! Sounds as your burner doesn't like the (media code) Disc ID: CMC MAG-E01-00 code very well. Have you tried another burn speed such as 4x? A cleaning disc could perhaps help. Other than that, I suggest you try with another brand of discs/media code. I ran Windows 7 RC with ImgBurn 2.4.4.0 before and I didnt have to set the speeds and I used the same disc type. I find it odd that a more recent version of Windows and more recent version of imgburn would cause problems. Do you know about any disc cleaning apps? I might have to give it a try with a different brand and speed as you say. I just think its some kind of driver issue or something. Waiting to see if anybody else has it working with Win7 RTM.
LIGHTNING UK! Posted September 28, 2009 Posted September 28, 2009 Don't look at 'brands', you need to look at the dye the discs use - or you could end up just buying CMC again only under a different name. Buy from an online store that lists the dye/MID or make sure you buy Verbatims from a retail store (because Verbatim always use the good dyes/MIDs).
TheDarkStranger2009 Posted October 1, 2009 Author Posted October 1, 2009 Don't look at 'brands', you need to look at the dye the discs use - or you could end up just buying CMC again only under a different name. Buy from an online store that lists the dye/MID or make sure you buy Verbatims from a retail store (because Verbatim always use the good dyes/MIDs). I dont know. I havnt liked either of your responses. I'm going to try the old imgburn software, maybe some new bug was introduced in the new one because i didnt have to worry about speeds or types of discs or dyes. If that dont work Ill try another burning software... and if THAT dont work. I'll try another kind of disc.. Virbatum as you suggested.. I only delay doing this because i have bunch of HP Invent DVD's left and a whole 50 pack of Sony DVD's So nobody else has this problem? or is using Windows 7 RTM ?
mmalves Posted October 1, 2009 Posted October 1, 2009 The burn process relies on the burner/firmware/media combination: the software just feeds the data in the correct sequence, so using an older version of ImgBurn won't solve your problem. Have you tried a lens cleaning disc on your burner? It could be just dirt getting in the way. Also laptop burners aren't great at burning, so using high quality media plays a big part. By the way I've been using Windows 7 since before RC1 and ImgBurn never had any problems with it
TheDarkStranger2009 Posted October 1, 2009 Author Posted October 1, 2009 The burn process relies on the burner/firmware/media combination: the software just feeds the data in the correct sequence, so using an older version of ImgBurn won't solve your problem. Have you tried a lens cleaning disc on your burner? It could be just dirt getting in the way. Also laptop burners aren't great at burning, so using high quality media plays a big part. By the way I've been using Windows 7 since before RC1 and ImgBurn never had any problems with it lens cleaning disc? where do i get that? should i just blow air into that area? burner should be okay i used it tons of times this month. firmware is the same as before its some MS old ass firmware. media was also the same as before. so im lost. yea imgburn worked with win7 rc, it did not work withthe final version WIN7 RTM. are you using that one? i guess i can try cleaning
mmalves Posted October 1, 2009 Posted October 1, 2009 Yes, I'm using Win7 RTM. As for cleaning the burner there are some cleaning disc kits sold on CD/DVD stores, or you could manually cleaning the burner's lenses with a cotton bud and some alcohol.
TheDarkStranger2009 Posted October 7, 2009 Author Posted October 7, 2009 I uninstalled imgbrun 2.50, then installed with Adminstrative rights. Right -click >> Run as Administrator. Wanted to see if this would make a difference. Then I was able to burn!! here's the log. makes no sense why it failed before. Maybe i had installed something? maybe i needed to restart? LOG ++++++++++++++++++++++++++++++++++++++ I 20:31:08 ImgBurn Version 2.5.0.0 started! I 20:31:08 Microsoft Windows 7 Professional Edition (6.1, Build 7600) I 20:31:08 Total Physical Memory: 3,144,120 KB - Available: 1,606,528 KB I 20:31:08 Initialising SPTI... I 20:31:08 Searching for SCSI / ATAPI devices... I 20:31:08 Found 1 DVD
Recommended Posts