beme1010 Posted October 4, 2009 Posted October 4, 2009 (edited) i have been using imgburn for 2 weeks now...it has been working fine untill today this error is popping up around 30% cant figure it out PLEASE HELP thnk you here is my log I 00:36:03 ImgBurn Version 2.5.0.0 started! I 00:36:03 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 00:36:03 Total Physical Memory: 915,884 KB - Available: 460,220 KB I 00:36:03 Initialising SPTI... I 00:36:03 Searching for SCSI / ATAPI devices... E 00:36:03 Device->Initialise() Failed! E 00:36:03 Device: [3:0:0] (E:) (ATA) E 00:36:03 This drive is currently locked for exclusive access by 'ImgBurn v2.5.0.0 - PID: 528'. E 00:36:03 Device->Initialise() Failed! E 00:36:03 Device: [3:0:0] (E:) (ATA) E 00:36:03 This drive will not be visible in the program. E 00:41:11 Device->Initialise() Failed! E 00:41:11 Device: [3:0:0] (E:) (ATA) E 00:41:11 This drive will not be visible in the program. W 00:41:11 No devices detected! I 00:41:16 Close Request Acknowledged I 00:41:16 Closing Down... I 00:41:16 Shutting down SPTI... I 00:41:16 ImgBurn closed! I 00:09:51 ImgBurn Version 2.5.0.0 started! I 00:09:51 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 00:09:51 Total Physical Memory: 915,884 KB - Available: 480,560 KB I 00:09:52 Initialising SPTI... I 00:09:52 Searching for SCSI / ATAPI devices... I 00:09:52 Found 1 DVD error2.bmp Edited October 4, 2009 by beme1010
LIGHTNING UK! Posted October 4, 2009 Posted October 4, 2009 I suggest you try one (or all) of the other 'supported' write speeds, obviously 2x (which doesn't exist and will use 2.4x anyway) simply isn't working out for you.
Recommended Posts