burje Posted October 16, 2009 Share Posted October 16, 2009 Hello, so I have just flashed my x-box360 to try and burn some games to it.. first I tried was Fifa10, failed at 50%, tried again, failed at the same spot. Tryed Dirt 2 after updating the firmware to the burner, great success ! So I went on and gave Overlord 2 a shoot, worked fine aswell. Then I attempted to burn Wanted, and have failed 3 times on that now, the same problem (i think) as with fifa. It starts great, goes to 50% and then says "Write error".. I have tried to burn it in both 2.4x and 4x. Someone that knows how to fix this or atlest why it fails ? Thx in advance! I'm Swedish so i apologize for bad grammar or spelling. Here is the log: I 16:12:22 ImgBurn Version 2.5.0.0 started! I 16:12:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7100) I 16:12:22 Total Physical Memory: 3 135 048 KB - Available: 2 069 328 KB I 16:12:22 Initialising SPTI... I 16:12:22 Searching for SCSI / ATAPI devices... I 16:12:22 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:12:56 Operation Started! I 16:12:56 Source File: E:\Nya filer\Wanted_Weapons_of_Fate_RF_XBOX360-SuperX360\sx-wwofa.dvd I 16:12:56 Source File Sectors: 3 827 488 (MODE1/2048) I 16:12:56 Source File Size: 7 838 695 424 bytes I 16:12:56 Source File Volume Identifier: DVD_ROM I 16:12:56 Source File Volume Set Identifier: 356fc000MS UDFBridge I 16:12:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:12:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:12:56 Source File File System(s): ISO9660; UDF (1.50) I 16:12:56 Destination Device: [2:0:0] Optiarc DVD RW AD-7173S 1-03 (F:) (ATA) I 16:12:56 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x; 8x) I 16:12:56 Destination Media Sectors: 4 173 824 I 16:12:56 Write Mode: DVD I 16:12:56 Write Type: DAO I 16:12:56 Write Speed: 4x I 16:12:56 Link Size: Auto I 16:12:56 Lock Volume: Yes I 16:12:56 Test Mode: No I 16:12:56 OPC: No I 16:12:56 BURN-Proof: Enabled I 16:12:56 Book Type Setting: DVD-ROM I 16:12:56 User Specified L0 Data Zone Capacity: 1 913 760 I 16:13:25 Set L0 Data Zone Capacity Succeeded! I 16:13:25 Filling Buffer... (40 MB) I 16:13:26 Writing LeadIn... I 16:13:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 16:13:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 16:13:27 Writing Layer 0... (LBA: 0 - 1913759) I 16:25:04 Writing Layer 1... (LBA: 1913760 - 3827487) W 16:25:42 Failed to Write Sectors 1914240 - 1914271 - Reason: Power Calibration Area Error W 16:25:42 Retrying (1 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (2 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (3 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (4 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (5 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (6 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (7 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (8 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (9 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (10 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (11 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (12 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:43 Retrying (13 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (14 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (15 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (16 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (17 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (18 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (19 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (20 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:36:08 Retrying (21)... W 16:36:08 Retry Failed - Reason: Write Error W 16:36:09 Retrying (22)... W 16:36:09 Retry Failed - Reason: Write Error E 16:36:15 Failed to Write Sectors 1914240 - 1914271 - Reason: Power Calibration Area Error I 16:36:15 Synchronising Cache... W 16:36:20 User opted to skip the 'Close Track/Session/Disc' functions. E 16:36:20 Failed to Write Image! I 16:36:20 Exporting Graph Data... I 16:36:20 Graph Data File: C:\Users\Berge\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7173S_1-03_DEN-15-OKTOBER-2009_16-12_MKM-003-00_4x.ibg I 16:36:20 Export Successfully Completed! E 16:36:20 Operation Failed! - Duration: 00:23:24 I 16:36:20 Average Write Rate: 2 800 KB/s (2.0x) - Maximum Write Rate: 5 774 KB/s (4.2x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2009 Share Posted October 16, 2009 If 2.4x and 4x have failed, try 6x and 8x. You could also try cleaning your drive with a cleaning disc. Have you tried some discs from a different spindle? Maybe your one is a bit iffy? Link to comment Share on other sites More sharing options...
burje Posted October 16, 2009 Author Share Posted October 16, 2009 (edited) I guess I'll try a different spindle in 6 and 8x speed then ! Gonna pick up a cleaning disc later today and give it a go.. thx for the awnser! Edited October 16, 2009 by burje Link to comment Share on other sites More sharing options...
burje Posted October 16, 2009 Author Share Posted October 16, 2009 It worked at 8x speed.. why !? >.< If you could explaine it to me.. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2009 Share Posted October 16, 2009 They're 8x discs and I guess that's the speed your drive likes burning them at the most. That's not to say it should fail at the other speeds, but obviously it was/did. Link to comment Share on other sites More sharing options...
burje Posted October 16, 2009 Author Share Posted October 16, 2009 Thank you so much anyway! And thanks for a great program! keep it up and cya Link to comment Share on other sites More sharing options...
Recommended Posts