Jump to content

Can anybody help me with this problem?


Natural Cool

Recommended Posts

Can anybody help me with this problem i keep getting when i want to burn a xbox 360 game on my samsung external writer SE-S084C on a Verbatim 8x DVD+R DL disk, i've updated my writer with the latest firmware from samsung.com but keep getting the following failure:

 

I 19:31:26 ImgBurn Version 2.5.0.0 started!

I 19:31:26 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 19:31:26 Total Physical Memory: 2.094.856 KB - Available: 951.536 KB

I 19:31:26 Initialising SPTI...

I 19:31:26 Searching for SCSI / ATAPI devices...

I 19:31:26 Found 1 DVD±RW and 1 DVD±RW/RAM!

I 19:31:41 Operation Started!

I 19:31:41 Source File: K:\Torrents\FiFA.10.PAL.XBOX360-GLoBAL\fifa10x360.dvd

I 19:31:41 Source File Sectors: 3.827.488 (MODE1/2048)

I 19:31:41 Source File Size: 7.838.695.424 bytes

I 19:31:41 Source File Volume Identifier: DVD_ROM

I 19:31:41 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 19:31:41 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:31:41 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:31:41 Source File File System(s): ISO9660; UDF (1.50)

I 19:31:41 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084C TS00 (M:) (USB)

I 19:31:41 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x; 4x; 6x)

I 19:31:41 Destination Media Sectors: 4.173.824

I 19:31:41 Write Mode: DVD

I 19:31:41 Write Type: DAO

I 19:31:41 Write Speed: 2,4x

I 19:31:41 Link Size: Auto

I 19:31:41 Lock Volume: Yes

I 19:31:41 Test Mode: No

I 19:31:41 OPC: No

I 19:31:41 BURN-Proof: Enabled

W 19:31:45 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 4.155 KB/s (3x)

I 19:31:45 Book Type Setting: DVD-ROM

I 19:31:45 User Specified L0 Data Zone Capacity: 1.913.760

W 19:32:12 Device Removal Detected!

W 19:32:12 The device list will be refreshed at the next available opportunity.

E 19:32:21 Set L0 Data Zone Capacity Failed! - Reason: De time-outperiode van de semafoor is verlopen.

E 19:32:21 Failed to unlock drive from exclusive access.

E 19:32:21 Reason: De aanvraag wordt niet ondersteund.

W 19:32:21 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been enabled.

E 19:32:21 Operation Failed! - Duration: 00:00:39

I 19:32:21 Average Write Rate: N/A - Maximum Write Rate: N/A

E 19:32:25 CreateFile Failed! - Device: '\\?\usbstor#cdrom&ven_tsstcorp&prod_cddvdw_se-s084c&rev_ts00#sataslim0000001069f&0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}'

E 19:32:25 Reason: Het systeem kan het opgegeven bestand niet vinden.

I 19:32:25 Searching for SCSI / ATAPI devices...

I 19:32:26 Found 1 DVD±RW!

W 19:32:36 Device Arrival Detected!

I 19:32:36 Searching for SCSI / ATAPI devices...

I 19:32:36 Found 1 DVD±RW and 1 DVD±RW/RAM!

 

Anybody got any suggestions?

 

Greetz Natural Cool

Link to comment
Share on other sites

Your system and drive don't like each other.

 

It times out way too early (after ~25 seconds) and basically disconnected itself (or the OS disconnected it).

 

[quote

I 19:31:45 User Specified L0 Data Zone Capacity: 1.913.760

W 19:32:12 Device Removal Detected!

W 19:32:12 The device list will be refreshed at the next available opportunity.

E 19:32:21 Set L0 Data Zone Capacity Failed! - Reason: De time-outperiode van de semafoor is verlopen.

 

There might not be much you can do about it except change the drive's enclosure or change your USB controller (buy a new PCI card one)

Link to comment
Share on other sites

I 19:31:41 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084C TS00 (M:) (USB)

I 19:31:41 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x; 4x; 6x)

I 19:31:41 Write Speed: 2,4x

That isn't the latest firmware.

 

Anyway, you're having a semaphore timeout error, which is usually caused by an incompatibility between your motherboard's USB chipset and the external drive's USB chipset. Search this forum for semaphore timeout and you'll find lots of suggestions on how to fix it. Also try burning at 4x or 6x next time.

 

//edit too slow :P

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.