Broncky_BE Posted November 5, 2009 Posted November 5, 2009 hello i have been 2 days beeing to try burning a blu-ray on a LG BD-RE on a LG burner whit imgburn i always get the i/o error : Scsistatus : 0x02 interpretation : check condition CDB: AC 14 00 00 00 00 00 00 00 01 00 00 interpretation : get performance sense area : 70 00 05 00 00 00 00 0a ac 14 00 b0 24 00 00 c0 00 01 interpretation : invalid field in cdb i have also burned it whit nero and there error 2 : 12:31:59 #2 SPTI -1 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1) CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0xB6 Sense Qual: 0x80 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 B0 B6 80 Buffer x05fe6f40: Len x20 12:31:59 #3 Text 0 File Isodoc.cpp, Line 6789 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : manual UDF Revision : 2.50 UDF Partition Type : physical 12:32:00 #4 Text 0 File Burncd.cpp, Line 3563 Turn on Disc-At-Once, using Blu-ray Disc media 12:32:00 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorBD' ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '2.50' to '2.50' 12:32:00 #6 Text 0 File DlgWaitCD.cpp, Line 1858 U brandt een schijf in UDF versie 2.5 of hoger. De schijf is daarom mogelijk niet in alle besturingssystemen toegankelijk. 12:32:00 #7 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorBD' ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '2.50' to '2.50' 12:32:00 #8 Text 0 File DlgWaitCD.cpp, Line 1858 U brandt een schijf in UDF versie 2.5 of hoger. De schijf is daarom mogelijk niet in alle besturingssystemen toegankelijk. 12:32:05 #9 SPTI -1 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1) CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0xB6 Sense Qual: 0x80 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 B0 B6 80 Buffer x05fe75c0: Len x20 12:32:06 #10 Text 0 File DlgWaitCD.cpp, Line 312 Last possible write address on media: 11826175 (2628:02.25, 23097MB) Last address to be written: 3684895 (818:51.70, 7197MB) 12:32:06 #11 Text 0 File DlgWaitCD.cpp, Line 324 Write in overburning mode: NO (enabled: CD) 12:32:06 #12 Text 0 File DlgWaitCD.cpp, Line 2951 Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-RE 12:32:06 #13 Text 0 File DlgWaitCD.cpp, Line 499 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.) 12:32:06 #14 Text 0 File ThreadedTransferInterface.cpp, Line 756 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3684576 (3684576) = #3684576/818:47.51 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3684576 blocks [F: HL-DT-ST BD-RE GGW-H20L] 1: TRM_DATA_MODE1 () 2 indices, index0 (0) not provided original disc pos #0 + 320 (320) = #320/0:4.20 relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320 blocks [F: HL-DT-ST BD-RE GGW-H20L] -------------------------------------------------------------- 12:32:06 #15 Text 0 File ThreadedTransferInterface.cpp, Line 958 Prepare [F: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 2: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7546011648, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 7546011648 7546011648 7546667008, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3684576 | 0 | 0x00 3684576 | 2 | 0 | 0x41 | 0 | 0 | 0x00 3684576 | 2 | 1 | 0x41 | 320 | 3684576 | 0x00 3684896 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 12:32:11 #16 Text 0 File SCSIPTICommands.cpp, Line 264 Error on LockVolume: Toegang geweigerd. 12:32:11 #17 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:32:11 #18 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 12:32:11 #19 Text 0 File Burncd.cpp, Line 4362 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 12:32:11 #20 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 12:32:11 #21 Text 0 File Burncd.cpp, Line 4484 Cache writing successful. 12:32:11 #22 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 12:32:11 #23 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 2x (8.990 kB/sec) 12:32:12 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2675 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:32:12 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2675 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #11825856 12:32:12 #26 Text 0 File Cdrdrv.cpp, Line 10187 ---- Disc Structure (BD): Disc Information on BD (00h) ---- Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098 --- Header --- Disc Information Identifier: <DI> Disc Information Format: 01 h Number of DI Units/Aux Frames in each DI block: 2 Number of (recording) layer to which this DI Unit applies: 0 DI unit Sequence Number in DI Block: 0 Continuation flag: Next DI Unit is the start of a new set of parameters (0) Number of DI bytes in use in this DI unit: 99 --- Body --- Disc Type Identifier: <BDW> Disc Size/Class/Version: 2 DI Unit Format dependent contents: BD Structure: 20 (14 h): 1 recording layer (SL), BD-RE Hybrid Disc identifier/Channel bit length: 1 (1 h): no DVD layer present, no CD layer present channel bit length of 74,5 nm (25.0 GB max. per layer) Push-Pull polarity flag bits: 00 h BCA descriptor: BCA-code present (1) Maximum transfer rate needed by the application: 0 Mbit/s Data zone allocation: First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072) Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494) Recording velocities: Nominal Recording Velocity: 4.92 m/s (1EC h) Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1 Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1 ... 14 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00 00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E 00 00 00 00 60 6B 76 04 - 04 59 59 2B 60 6B 76 04 04 59 59 2B 60 6B 76 04 - 04 59 59 2B 50 50 50 50 20 20 20 20 20 20 20 20 - 20 00 00 00 0F F0 F0 F0 F0 F0 F0 F0 F0 F0 00 00 --- Trailer --- Disc Manufacturer ID: 4C 47 45 42 52 45 h <LGEBRE> Media Type ID: 53 30 31 <S01> Time Stamp [m:y]: 0 : 0000 (00 00 h) Product Revision Number: 0 12:32:40 #27 Text 0 File BD.cpp, Line 520 Format BD-RE with Format Type 0h, sub-type 0, spare area size 0 -> return code 0 Allocated spare area size on disc 393216 BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0), spare area allocation: allocation (1), Stream recording: NO (0); return code 0 12:32:40 #28 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 12:32:40 #29 Text 0 File CUDFTransferItem2.cpp, Line 660 GenUDF2 FS Layout: =-=-=-=-=-=-=-=-=-=- Sectors to be written: 3684896 Session Start: Sector 0 Volume Structure: Sector [0, 287] (288 Sectors) Before Meta Data: Sector [288, 319] (32 Sectors) Meta Data: Sector [320, 383] (64 Sectors) Data: Sector [384, 3684487] (3684104 Sectors) After Data: Sector [3684488, 3684575] (88 Sectors) Trailer Track: Sector [11825856, 11826175] (320 Sectors) GenUDF2 Parameters: =-=-=-=-=-=-=-=-=-=- PrepTime: 11-05-2009 12:32:04 UDF Revision: 2.50 UDF Partition Type: Physical UDF Special Mode: None Bytes per Sector: 2048 Session Start: 0 Physical Partition Start: -1 Total Capacity: 11826176 Multi Session Mode: Begin Disc Type: BD-RE OS Class: 5 Volume ID: terminator salv Allow Unicode Labels: 0 Duplicate Meta Data: 1 MS Info File: 07B1F490 VMS Rollback File: 00000000 Create ISO bridge: 0 ECC Block Length: 32 Sparing Packet Length: 32 Allocation Unit Size: 32 Alignment Unit Size: 32 Make Writable: 0 Access Type: Read-only 12:33:33 #30 SPTI -1135 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x2A 00 00 00 04 80 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x02 Sense Area: 0x70 00 03 00 00 00 00 0A 36 20 03 B0 0C 02 Buffer x192f0940: Len x10000 0x1A 7E BE 3B 3E 3F EF CA F7 9D 26 37 2B 3F B2 7E 0x45 59 B8 3F A3 26 6F 3B C0 97 8C F4 7A 3E 1E C5 0x59 BB 99 D2 49 7D 43 1C 1C 9E 9C 86 E0 A6 01 CD 12:33:33 #31 CDR -1135 File Writer.cpp, Line 306 Write error F: HL-DT-ST BD-RE GGW-H20L 12:33:33 #32 SPTI -1135 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x02 Sense Area: 0x71 00 03 00 00 00 00 0A 36 20 03 B0 0C 02 Buffer x05fe6400: Len x20 12:33:33 #33 CDR -1135 File WriterStatus.cpp, Line 292 Write error F: HL-DT-ST BD-RE GGW-H20L 12:33:33 #34 TRANSFER -24 File WriterStatus.cpp, Line 292 Could not perform end of Disc-at-once 12:33:33 #35 Text 0 File DVDPlusDualLayer.cpp, Line 1424 SetDriveCaps: Set LAST LBA of layer 1 to 0 12:33:33 #36 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 2x (8.990 kB/sec) 12:33:33 #37 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:33:39 #38 SPTI -1079 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079) CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x53 Sense Qual: 0x00 Sense Area: 0x70 00 04 00 00 00 00 0A 02 00 03 B0 53 12:33:42 #39 Text 0 File Cdrdrv.cpp, Line 11444 DriveLocker: UnLockVolume completed 12:33:42 #40 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL hopely soembody can help me plz you alsow can add me on msn : Bronckaerts_joachim at hot grtz
LIGHTNING UK! Posted November 5, 2009 Posted November 5, 2009 That's a Nero log, you're on the ImgBurn forum. Please don't insult us
Broncky_BE Posted November 5, 2009 Author Posted November 5, 2009 That's a Nero log, you're on the ImgBurn forum. Please don't insult us ok sorry but the point is that i wanna be helped but the first is a imgburn error i/o : Scsistatus : 0x02 interpretation : check condition CDB: AC 14 00 00 00 00 00 00 00 01 00 00 interpretation : get performance sense area : 70 00 05 00 00 00 00 0a ac 14 00 b0 24 00 00 c0 00 01 interpretation : invalid field in cdb
LIGHTNING UK! Posted November 5, 2009 Posted November 5, 2009 I need the log (copy+paste from the log window after a failed burn or open old logs via the Help menu), not the contents of the error box.
Broncky_BE Posted November 5, 2009 Author Posted November 5, 2009 I need the log (copy+paste from the log window after a failed burn or open old logs via the Help menu), not the contents of the error box. 14:02:16 ImgBurn Version 2.5.0.0 started! I 14:02:16 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1) I 14:02:16 Total Physical Memory: 4.192.648 KB - Available: 2.535.772 KB W 14:02:16 SPTD can have a detrimental effect on drive performance. I 14:02:16 Initialising SPTI... I 14:02:16 Searching for SCSI / ATAPI devices... I 14:02:16 Found 3 DVD-ROMs, 1 DVD±RW and 1 HD DVD-ROM/BD-RE! I 14:02:37 Operation Started! I 14:02:37 Building Image Tree... I 14:02:37 Calculating Totals... I 14:02:37 Preparing Image... I 14:02:37 Contents: 14 Files, 10 Folders I 14:02:37 Content Type: BD Video I 14:02:37 Data Type: MODE1/2048 I 14:02:37 File System(s): UDF (2.50) I 14:02:37 Volume Label: [Not Configured] I 14:02:37 Size: 7.545.019.024 bytes I 14:02:37 Sectors: 3.684.100 I 14:02:37 Image Size: 7.546.077.184 bytes I 14:02:37 Image Sectors: 3.684.608 I 14:02:37 Operation Successfully Completed! - Duration: 00:00:00 I 14:03:45 Operation Started! I 14:03:45 Building Image Tree... I 14:03:46 Calculating Totals... I 14:03:46 Preparing Image... I 14:03:46 Contents: 14 Files, 10 Folders I 14:03:46 Content Type: BD Video I 14:03:46 Data Type: MODE1/2048 I 14:03:46 File System(s): UDF (2.50) I 14:03:46 Volume Label: blu-ray terminator salvation I 14:03:46 Size: 7.545.019.024 bytes I 14:03:46 Sectors: 3.684.100 I 14:03:46 Image Size: 7.546.077.184 bytes I 14:03:46 Image Sectors: 3.684.608 I 14:03:48 Operation Successfully Completed! - Duration: 00:00:03 I 14:03:48 Operation Started! I 14:03:48 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:03:48 Source File Sectors: 3.684.608 (MODE1/2048) I 14:03:48 Source File Size: 7.546.077.184 bytes I 14:03:48 Source File Volume Identifier: blu-ray terminator salvation I 14:03:48 Source File Application Identifier: ImgBurn v2.5.0.0 I 14:03:48 Source File Implementation Identifier: ImgBurn I 14:03:48 Source File File System(s): UDF (2.50) I 14:03:48 Destination Device: [0:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 14:03:48 Destination Media Type: BD-RE (Disc ID: LGEBRE-S01-00) (Speeds: 2x) I 14:03:48 Destination Media Sectors: 11.826.176 I 14:03:48 Write Mode: BD I 14:03:48 Write Type: DAO I 14:03:48 Write Speed: 2x I 14:03:48 BD-RE FastWrite: No I 14:03:48 Link Size: Auto I 14:03:48 Lock Volume: Yes I 14:03:48 Test Mode: Yes I 14:03:48 OPC: No I 14:03:48 BURN-Proof: Enabled I 14:19:50 Filling Buffer... (40 MB) I 14:19:51 Writing LeadIn... W 14:19:51 Failed to Write Sectors 0 - 31 - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (1 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (2 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (3 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (4 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (5 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (6 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (7 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (8 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (9 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (10 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (11 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (12 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (13 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (14 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (15 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (16 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (17 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (18 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (19 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 14:19:51 Retrying (20 of 20)... W 14:19:51 Retry Failed - Reason: Cannot Write Medium - Incompatible Format E 14:21:26 Failed to Write Sectors 0 - 31 - Reason: Cannot Write Medium - Incompatible Format I 14:21:26 Synchronising Cache... I 14:21:29 Cycling Tray after Test Write... E 14:21:34 Failed to Write Image! E 14:21:37 Operation Failed! - Duration: 00:17:46 I 14:21:37 Average Write Rate: N/A - Maximum Write Rate: N/A I 14:21:40 Close Request Acknowledged I 14:21:40 Closing Down... I 14:21:41 Shutting down SPTI... I 14:21:41 ImgBurn closed!
LIGHTNING UK! Posted November 5, 2009 Posted November 5, 2009 Ah ok, forget using the LG supplied disc, they fail for most people. (Useless, I know!)
Broncky_BE Posted November 5, 2009 Author Posted November 5, 2009 Ah ok, forget using the LG supplied disc, they fail for most people. (Useless, I know!) ok thaks for helping but you now it for sure that the errors comes because of that disc not that i'm gona buy a another blu-ray disc and it are the same errors
LIGHTNING UK! Posted November 5, 2009 Posted November 5, 2009 Well we've had lots of people saying the supplied LG discs don't work. I didn't even bother to unwrap mine, I'd already ordered some Verbatim ones (I have the same drive as you).
Recommended Posts